[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 379.

ceslick

full member

Activity: 161

Merit: 100

digging in the bits... now ant powered!

Hi,

Tried this, didn't work Sad

Managed to get it working by reinstalling twisted and zope a few times... Also forced python version to 2.7

Lets see how it goes

Will test a while

I did notice one error at one stage where it said it lost connection to bitcoind for 1.5 minutes. Any ideas?

Quote from: nreal on May 27, 2014, 06:45:47 AM

Quote from: ceslick on May 27, 2014, 03:48:44 AM

Tried purging those and re installing them

Same result...

Twisted version 13.0.0-1 is installed

cd to folder where you have p2pool

cd /p2pool

./configure

make -j12

should do it

Replace ubuntu with Gentoo

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Quote from: -ck on May 27, 2014, 10:45:52 PM

Kano has an S2 now and is working on official code for cgminer that hopefully will rectify the behaviour of the driver they included with it.

Good news for S2 owners.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: norgan on May 27, 2014, 08:09:16 AM

Is it just me or did the p2pool hash rate just double to almost 1ph/s?!

Last time it did a big jump like that it was the attack that was redirecting people's hashes from other pools to their own p2pool node.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Kano has an S2 now and is working on official code for cgminer that hopefully will rectify the behaviour of the driver they included with it.

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

It would be nice to hear from others with S2s on p2pool to find out if the same loss of hash rate occurs for them as well. Unfortunately, I don't have one to test, either. I will, however, have an SP-10 delivered tomorrow - which unfortunately won't be hashing until Saturday evening because I'm on the other freaking side of the planet. I will definitely be trying it out on p2pool, Eligius, BTCGuild and GHash.io to see if there are any significant differences in hash rate.

Anyone with S2s running on p2pool?

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: mdude77 on May 27, 2014, 08:10:58 PM

Quote from: windpath on May 27, 2014, 08:04:39 PM

Quote from: mdude77 on May 27, 2014, 07:43:14 PM

Quote from: PatMan on May 27, 2014, 06:25:55 PM

Quote from: mdude77 on May 27, 2014, 05:23:59 PM

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

I got one arriving tomorrow - I'll let you know how I get on, but 10% is too much to lose for sure - especially at the price of them Wink

I've got two S2s. Both behave the same way. Within minutes of pointing at a p2pool node, the hash rate drops to about 930gh/s or less. Sad

M

Hey mdude...

I know you pretty knowledgeable, but figured I'd give you my run through:

1. I'm not sure if your node is local to your miners, whats your latency?
2. Set your pseudo share difficulty
3. give it some time? looking at your graphs I don't see a consecutive length of time of ~1TH/s hashing, and I do see good effiency and a decent share count, it will take some time to accurately represent your estimated payout, 3-4 days of consistent mining to get some shares in and see where your at...

Other than that, I peeked at the graphs on your node and everything else seems within regular parameters...

1 - I've observed this running locally, across the country (my public node), and at least one other node that's close by.
2 - I've tried setting pseudo share difficulty as high as possible, which is apparently 1k.
3 - I stopped running at p2pool a while ago because of this problem. Before that I tried different things over a period of close to a week before I gave up.

M

It's strange... maybe our friends at Bitmain played with the CGMiner code some more and created an unintentional glitch?

All my S1's report accurately, don't have an S2 to play with...

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: windpath on May 27, 2014, 08:04:39 PM

Quote from: mdude77 on May 27, 2014, 07:43:14 PM

Quote from: PatMan on May 27, 2014, 06:25:55 PM

Quote from: mdude77 on May 27, 2014, 05:23:59 PM

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

I got one arriving tomorrow - I'll let you know how I get on, but 10% is too much to lose for sure - especially at the price of them Wink

I've got two S2s. Both behave the same way. Within minutes of pointing at a p2pool node, the hash rate drops to about 930gh/s or less. Sad

M

Hey mdude...

I know you pretty knowledgeable, but figured I'd give you my run through:

1. I'm not sure if your node is local to your miners, whats your latency?
2. Set your pseudo share difficulty
3. give it some time? looking at your graphs I don't see a consecutive length of time of ~1TH/s hashing, and I do see good effiency and a decent share count, it will take some time to accurately represent your estimated payout, 3-4 days of consistent mining to get some shares in and see where your at...

Other than that, I peeked at the graphs on your node and everything else seems within regular parameters...

1 - I've observed this running locally, across the country (my public node), and at least one other node that's close by.
2 - I've tried setting pseudo share difficulty as high as possible, which is apparently 1k.
3 - I stopped running at p2pool a while ago because of this problem. Before that I tried different things over a period of close to a week before I gave up.

M

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: mdude77 on May 27, 2014, 07:43:14 PM

Quote from: PatMan on May 27, 2014, 06:25:55 PM

Quote from: mdude77 on May 27, 2014, 05:23:59 PM

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

I got one arriving tomorrow - I'll let you know how I get on, but 10% is too much to lose for sure - especially at the price of them Wink

I've got two S2s. Both behave the same way. Within minutes of pointing at a p2pool node, the hash rate drops to about 930gh/s or less. Sad

M

Hey mdude...

I know you pretty knowledgeable, but figured I'd give you my run through:

1. I'm not sure if your node is local to your miners, whats your latency?
2. Set your pseudo share difficulty
3. give it some time? looking at your graphs I don't see a consecutive length of time of ~1TH/s hashing, and I do see good effiency and a decent share count, it will take some time to accurately represent your estimated payout, 3-4 days of consistent mining to get some shares in and see where your at...

Other than that, I peeked at the graphs on your node and everything else seems within regular parameters...

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: PatMan on May 27, 2014, 06:25:55 PM

Quote from: mdude77 on May 27, 2014, 05:23:59 PM

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

I got one arriving tomorrow - I'll let you know how I get on, but 10% is too much to lose for sure - especially at the price of them Wink

I've got two S2s. Both behave the same way. Within minutes of pointing at a p2pool node, the hash rate drops to about 930gh/s or less. Sad

M

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: mdude77 on May 27, 2014, 05:23:59 PM

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

I got one arriving tomorrow - I'll let you know how I get on, but 10% is too much to lose for sure - especially at the price of them Wink

mdude77

legendary

Activity: 1540

Merit: 1001

Anyone have any definitive thoughts on how to get S2s working with p2pool at full capacity? I can't justify losing 10% of my hashpower to use p2pool.

M

forrestv

hero member

Activity: 516

Merit: 643

Quote from: jedimstr on May 27, 2014, 11:27:44 AM

Any word on when the stats page http://p2pool.info/ is coming back? It's been down for days now. It was fully transfered to forrestv a few months ago right?

Yes, I control it, and I'll fix it soon, hopefully in the next day.

norgan

sr. member

Activity: 308

Merit: 250

Decentralize your hashing - p2pool - Norgz Pool

Quote from: windpath on May 27, 2014, 09:14:39 AM

Quote from: norgan on May 27, 2014, 08:09:16 AM

Is it just me or did the p2pool hash rate just double to almost 1ph/s?!

I'm showing 682TH/s on my node, a nice jump....

If you have some new miners hitting your node you may want to set your share diff and pseudo share diff on your miner....

Code:

bitcoin_address/+

If your running S1's set to 0 ("0" defaults to lowest p2pool diff, currently 1677854.73)

And to 220.4 (optimized for 190GH/s)

is calculated as your hash rate in KH/s times 0.00000116

i.e. 190,000,000 * 0.00000116 = 220.4

Here is an example for an ant S1:

Code:

19vXrwKGUhK4cCU8tA4kWZgbChcmh9a6qj/0+220.4

If you have a hash rate over 1TH/s you might consider upping your share diff to something higher then the p2pool minimum to reduce network traffic and increase the value of your shares...

Thanks for the info.

norgan

sr. member

Activity: 308

Merit: 250

Decentralize your hashing - p2pool - Norgz Pool

Quote from: windpath on May 27, 2014, 03:18:39 PM

Quote from: jedimstr on May 27, 2014, 12:47:59 PM

Quote from: windpath on May 27, 2014, 12:18:40 PM

Getting ready for the next release of our front end this week, I believe I have all the data your looking for and would be happy to create a view for it. Would just need a little help putting together exactly what you are looking for....

I have active miners for a given p2pool block (addresses that were paid and how much)

I have node, pool, and global hashrate.

I think what you are looking for is the estimated hash rate per p2pool payout address based on the payment from the last block?

Yes, I believe that's what was shown on one of the tabs for p2pool.info.

Since the site is still down, and using Norgon's clone of it as a reference (even though it's not up-to-date yet... blockchain data from 6 months ago), you can check out the Active Users tab. That shows the data I'm talking about: http://p2poolinfo.azurewebsites.net/

Edit: from the disclaimer text on the clone site, it sounds a bit different. Based more on the valid shares submitted in the last 24 hours. It would essentially be the hashrate estimate corresponding to the current Payout Estimate shown on the various node UI's.

From the p2pool.info clone:

Quote

The following users / addresses have submitted at least 1 valid share in the past 24 hours. Note: Hashrates are very rough estimates based on the number of shares submitted in the past day. They may be off by 10-20% or more due to variance.

Yea, those numbers look a little fuzzy to me...

What do you think about instead showing this:

Code:

[Address] - [Current Expected Payout] - [Last Block Payout] - [%+/-]

For each miner with active shares in a block?

I followed the deployment docs on that clone and it just won't update. Anyone know how I can get it up to date?

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: jedimstr on May 27, 2014, 12:47:59 PM

Quote from: windpath on May 27, 2014, 12:18:40 PM

Getting ready for the next release of our front end this week, I believe I have all the data your looking for and would be happy to create a view for it. Would just need a little help putting together exactly what you are looking for....

I have active miners for a given p2pool block (addresses that were paid and how much)

I have node, pool, and global hashrate.

I think what you are looking for is the estimated hash rate per p2pool payout address based on the payment from the last block?

Yes, I believe that's what was shown on one of the tabs for p2pool.info.

Since the site is still down, and using Norgon's clone of it as a reference (even though it's not up-to-date yet... blockchain data from 6 months ago), you can check out the Active Users tab. That shows the data I'm talking about: http://p2poolinfo.azurewebsites.net/

Edit: from the disclaimer text on the clone site, it sounds a bit different. Based more on the valid shares submitted in the last 24 hours. It would essentially be the hashrate estimate corresponding to the current Payout Estimate shown on the various node UI's.

From the p2pool.info clone:

Quote

The following users / addresses have submitted at least 1 valid share in the past 24 hours. Note: Hashrates are very rough estimates based on the number of shares submitted in the past day. They may be off by 10-20% or more due to variance.

Yea, those numbers look a little fuzzy to me...

What do you think about instead showing this:

Code:

[Address] - [Current Expected Payout] - [Last Block Payout] - [%+/-]

For each miner with active shares in a block?

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: windpath on May 27, 2014, 12:18:40 PM

Quote from: jedimstr on May 27, 2014, 11:27:44 AM

Any word on when the stats page http://p2pool.info/ is coming back? It's been down for days now. It was fully transfered to forrestv a few months ago right?

The clone site mentioned a few pages/posts back doesn't have up-to-date data so that doesn't help much.

If not, any other source to see a chart of P2Pool luck and payout address comparisons of global estimated hashrate (this is different from node estimated hashrate displayed at my node UI). It always gave me a good idea of how much more or less I was earning per block versus my actual real-life hashrate "deserved" (i.e., if p2pool.info showed me at 4TH and I have 2TH real, then it meant I was running lucky with shares submitted and was potentially making more than what I "should have" on a centralized pool).

Getting ready for the next release of our front end this week, I believe I have all the data your looking for and would be happy to create a view for it. Would just need a little help putting together exactly what you are looking for....

I have active miners for a given p2pool block (addresses that were paid and how much)

I have node, pool, and global hashrate.

I think what you are looking for is the estimated hash rate per p2pool payout address based on the payment from the last block?

Yes, I believe that's what was shown on one of the tabs for p2pool.info.

Since the site is still down, and using Norgon's clone of it as a reference (even though it's not up-to-date yet... blockchain data from 6 months ago), you can check out the Active Users tab. That shows the data I'm talking about: http://p2poolinfo.azurewebsites.net/

Edit: from the disclaimer text on the clone site, it sounds a bit different. Based more on the valid shares submitted in the last 24 hours. It would essentially be the hashrate estimate corresponding to the current Payout Estimate shown on the various node UI's.

From the p2pool.info clone:

Quote

The following users / addresses have submitted at least 1 valid share in the past 24 hours. Note: Hashrates are very rough estimates based on the number of shares submitted in the past day. They may be off by 10-20% or more due to variance.

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: jedimstr on May 27, 2014, 11:27:44 AM

Any word on when the stats page http://p2pool.info/ is coming back? It's been down for days now. It was fully transfered to forrestv a few months ago right?

The clone site mentioned a few pages/posts back doesn't have up-to-date data so that doesn't help much.

If not, any other source to see a chart of P2Pool luck and payout address comparisons of global estimated hashrate (this is different from node estimated hashrate displayed at my node UI). It always gave me a good idea of how much more or less I was earning per block versus my actual real-life hashrate "deserved" (i.e., if p2pool.info showed me at 4TH and I have 2TH real, then it meant I was running lucky with shares submitted and was potentially making more than what I "should have" on a centralized pool).

Getting ready for the next release of our front end this week, I believe I have all the data your looking for and would be happy to create a view for it. Would just need a little help putting together exactly what you are looking for....

I have active miners for a given p2pool block (addresses that were paid and how much)

I have node, pool, and global hashrate.

I think what you are looking for is the estimated hash rate per p2pool payout address based on the payment from the last block?

jedimstr

hero member

Activity: 798

Merit: 1000

Any word on when the stats page http://p2pool.info/ is coming back? It's been down for days now. It was fully transfered to forrestv a few months ago right?

The clone site mentioned a few pages/posts back doesn't have up-to-date data so that doesn't help much.

If not, any other source to see a chart of P2Pool luck and payout address comparisons of global estimated hashrate (this is different from node estimated hashrate displayed at my node UI). It always gave me a good idea of how much more or less I was earning per block versus my actual real-life hashrate "deserved" (i.e., if p2pool.info showed me at 4TH and I have 2TH real, then it meant I was running lucky with shares submitted and was potentially making more than what I "should have" on a centralized pool).

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: norgan on May 27, 2014, 08:09:16 AM

Is it just me or did the p2pool hash rate just double to almost 1ph/s?!

I'm showing 682TH/s on my node, a nice jump....

If you have some new miners hitting your node you may want to set your share diff and pseudo share diff on your miner....

Code:

bitcoin_address/+

If your running S1's set to 0 ("0" defaults to lowest p2pool diff, currently 1677854.73)

And to 220.4 (optimized for 190GH/s)

is calculated as your hash rate in KH/s times 0.00000116

i.e. 190,000,000 * 0.00000116 = 220.4

Here is an example for an ant S1:

Code:

19vXrwKGUhK4cCU8tA4kWZgbChcmh9a6qj/0+220.4

If you have a hash rate over 1TH/s you might consider upping your share diff to something higher then the p2pool minimum to reduce network traffic and increase the value of your shares...

norgan

sr. member

Activity: 308

Merit: 250

Decentralize your hashing - p2pool - Norgz Pool

Is it just me or did the p2pool hash rate just double to almost 1ph/s?!

Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 379. (Read 2591964 times)