Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 484. (Read 2591928 times)
September 21, 2013, 11:38:14 AM
You need to set your pesudoshare difficulty to 1 with +1 on the username. This is documented upthread. ASICminer blades are flawed and works only on difficulty 1 work even when directed otherwise.
September 21, 2013, 10:13:54 AM
Yep, my node is down at the moment due to a popped PSU. It'll be back up in the next few days, and I'll have a couple of Blades connecting to it - along with what I'm already running, that should be ~30GH/s coming back to p2pool.
How are you running your blades on p2pool? I was using bfgminer as a getwork proxy and over 30% of the shares where rejected. What share reject rates are you getting?Eventually got round to trying the Blades on p2pool - I'm seeing the same thing. Abandoned the idea for the meantime until something is done about it.
September 21, 2013, 10:12:11 AM
Any idea if p2pool is going to be fixed to work with ASICMiner Blades? I just tried my Blades on p2pool, and I get a shitload of rejects. Between 30-50%.
September 20, 2013, 06:44:33 AM
Join my fast HA P2Pool in germany or set it up as Backup
Cologne, Germany | http://p2pool-cologne.dyndns.org:9332 | 1.0% | BTC | P2Pool | Subo1977
have fun :-)
Cologne, Germany | http://p2pool-cologne.dyndns.org:9332 | 1.0% | BTC | P2Pool | Subo1977
have fun :-)
September 20, 2013, 01:43:25 AM
Does anyone have a p2pool that has all the merge-mined coins?
Namecoin, Devcoin, IOcoin? (I forget the rest)
Namecoin, Devcoin, IOcoin? (I forget the rest)
Yup, I do.....
Edit: But I took i0coin off - too memory sucking & drive bashing.....BTC, IXC, DVC, GRC & NMC only for now.
Can you tell me what is GRC? Couldn't find any links about it.
Sorry, it's GRP not GRC - which is GRouPcoin:
https://bitcointalk.org/index.php?topic=67991.60
You'll need RAM, it's a bit of a hog like I0coin was before it was updated. Took me a while to compile it too, still needs some work & there's no windoze version yet or GUI. But, as they say, every little helps. I mean, if you're gonna mergemine you might as well mine them all right?
September 19, 2013, 11:49:01 PM
Does anyone have a p2pool that has all the merge-mined coins?
Namecoin, Devcoin, IOcoin? (I forget the rest)
Namecoin, Devcoin, IOcoin? (I forget the rest)
Yup, I do.....
Edit: But I took i0coin off - too memory sucking & drive bashing.....BTC, IXC, DVC, GRC & NMC only for now.
Can you tell me what is GRC? Couldn't find any links about it.
September 19, 2013, 07:20:13 PM
try for the p2pool, how is the speed.
September 19, 2013, 06:57:35 PM
I have a day one KNC Jupiter pre-order and another one due before October 15th. Will they work on P2Pool node based pools OK. I also have three 60(GH/s) BFL SC's I could put on a P2Pool node based pool possibly but thinking of selling them soon.
It's my understanding that the miner software authors have heard _nothing_ from KNC lately, though they were told they'd be given access for testing. So if it'll work in any particular situation is a crapshoot. Historically mining code from hardware vendors has been pretty crappy.It takes a bit of time to install p2pool and bitcoind, so if you're planning on p2pool mining them I suggest getting it setup and running early. You can happily look at the p2pool graphs even if you're not mining on it. Your BFLs will run great on p2pool, or you could just use p2pool as a backup for them.
September 19, 2013, 04:28:40 PM
I have a day one KNC Jupiter pre-order and another one due before October 15th. Will they work on P2Pool node based pools OK. I also have three 60(GH/s) BFL SC's I could put on a P2Pool node based pool possibly but thinking of selling them soon.
September 18, 2013, 10:15:51 AM
Does anyone have a p2pool that has all the merge-mined coins?
Namecoin, Devcoin, IOcoin? (I forget the rest)
http://fuzzypool.mine.bz/ come join... 60GH is waiting in the back of a delivery van on its way to me now and 7GH on pool at the moment... all Merge Mined coins on the pool and 0% BTC fee Namecoin, Devcoin, IOcoin? (I forget the rest)
few minor bugs working out so sorry for the visual errors etc but mining works and need to test more on alt coins so your hashrate is appreciated
FuzzyBear
Glad to see someone has resurrected my code. Good luck.
September 18, 2013, 04:44:30 AM
Does anyone have a p2pool that has all the merge-mined coins?
Namecoin, Devcoin, IOcoin? (I forget the rest)
http://fuzzypool.mine.bz/ come join... 60GH is waiting in the back of a delivery van on its way to me now and 7GH on pool at the moment... all Merge Mined coins on the pool and 0% BTC fee Namecoin, Devcoin, IOcoin? (I forget the rest)
few minor bugs working out so sorry for the visual errors etc but mining works and need to test more on alt coins so your hashrate is appreciated
FuzzyBear
September 16, 2013, 04:23:46 AM
note that you will get about ~3GH stale/doa with the old blades running at 12-13GH, so your only getting a real 10GH..
[/quote
Stales on p2pool aren't wasted work, this is explained in numerous places (and in details in the guide in my signature). So you don't get "only 10 GH".
They may not be efficient on p2pool and not provide the full 13GH benefit to the miner, but you'll have to test and report what p2pool's efficiency is over at least 100 or better 1000 submitted shares to verify that.
[/quote
Stales on p2pool aren't wasted work, this is explained in numerous places (and in details in the guide in my signature). So you don't get "only 10 GH".
They may not be efficient on p2pool and not provide the full 13GH benefit to the miner, but you'll have to test and report what p2pool's efficiency is over at least 100 or better 1000 submitted shares to verify that.
September 15, 2013, 09:28:17 PM
Yep, my node is down at the moment due to a popped PSU. It'll be back up in the next few days, and I'll have a couple of Blades connecting to it - along with what I'm already running, that should be ~30GH/s coming back to p2pool.
How are you running your blades on p2pool? I was using bfgminer as a getwork proxy and over 30% of the shares where rejected. What share reject rates are you getting?you dont need to use proxy with blades and p2pool.. just point the blade directly at p2pool as you would any other miner... note that you will get about ~3GH stale/doa with the old blades running at 12-13GH, so your only getting a real 10GH.. not sure how the new blades run... also dont forget to append a '+1' to the end of your username on the blades when connecting to p2pool.. since they only know diff1, this will stop the annoying submit > target messages in the p2pool console output...
September 13, 2013, 12:21:45 PM
Hi everybody.
Is there a way to restart p2pool node and to save local shares statistic (that is shown in web interface)?
Is there a way to restart p2pool node and to save local shares statistic (that is shown in web interface)?
Not without patching p2pool to do so.
I think it's done this way because a restart is usually when you upgrade p2pool or test new bitcoind/p2pool parameters : reinitializing them makes sense to compare the p2pool behavior (mostly efficiency computed from these statistics) with previous ones.
September 13, 2013, 11:13:52 AM
Hi everybody.
Is there a way to restart p2pool node and to save local shares statistic (that is shown in web interface)?
Is there a way to restart p2pool node and to save local shares statistic (that is shown in web interface)?
September 12, 2013, 08:40:10 PM
Code:
2013-09-12 23:23:32.506232 Local: 110GH/s in last 10.0 minutes Local dead on arrival: ~14.0% (11-18%) Expected time to share: 28.3 minutes
2013-09-12 23:23:32.506678 Shares: 1 (0 orphan, 0 dead) Stale rate: ~0.0% (0-80%) Efficiency: ~115.0% (23-116%) Current payout: 0.0040 BTC
2013-09-12 23:23:32.507007 Pool: 12822GH/s Stale rate: 13.0% Expected time to block: 8.1 hours
2013-09-12 23:23:33.090955 > Error submitting merged block: (will retry)
2013-09-12 23:23:33.091435 > Traceback (most recent call last):
2013-09-12 23:23:33.091744 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 551, in _runCallbacks
2013-09-12 23:23:33.092047 > current.result = callback(current.result, *args, **kw)
2013-09-12 23:23:33.092341 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1101, in gotResult
2013-09-12 23:23:33.092684 > _inlineCallbacks(r, g, deferred)
2013-09-12 23:23:33.092978 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1043, in _inlineCallbacks
2013-09-12 23:23:33.093296 > result = result.throwExceptionIntoGenerator(g)
2013-09-12 23:23:33.093633 > File "/usr/lib/python2.7/dist-packages/twisted/python/failure.py", line 382, in throwExceptionIntoGenerator
2013-09-12 23:23:33.093944 > return g.throw(self.type, self.value, self.tb)
2013-09-12 23:23:33.094229 > ------
2013-09-12 23:23:33.094468 > File "/home/p2pool/p2pool/util/deferral.py", line 41, in f
2013-09-12 23:23:33.094700 > result = yield func(*args, **kwargs)
2013-09-12 23:23:33.094928 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1043, in _inlineCallbacks
2013-09-12 23:23:33.095170 > result = result.throwExceptionIntoGenerator(g)
2013-09-12 23:23:33.095399 > File "/usr/lib/python2.7/dist-packages/twisted/python/failure.py", line 382, in throwExceptionIntoGenerator
2013-09-12 23:23:33.095641 > return g.throw(self.type, self.value, self.tb)
2013-09-12 23:23:33.095871 > File "/home/p2pool/p2pool/util/jsonrpc.py", line 133, in _http_do
2013-09-12 23:23:33.096102 > raise Error_for_code(resp['error']['code'])(resp['error']['message'], resp['error'].get('data', None))
2013-09-12 23:23:33.096346 > p2pool.util.jsonrpc.NarrowError: -115 Incorrect block work
2013-09-12 23:23:35.554589 P2Pool: 17304 shares in chain (8921 verified/17308 total) Peers: 6 (0 incoming)
Code:
sudo easy_install -U twisted
or to upgrade all of the python modules
Code:
sudo python -c 'import pip, subprocess; [subprocess.call("pip install -U " + d.project_name, shell=1) for d in pip.get_installed_distributions()]' September 12, 2013, 02:23:55 PM
Code:
2013-09-12 23:23:32.506232 Local: 110GH/s in last 10.0 minutes Local dead on arrival: ~14.0% (11-18%) Expected time to share: 28.3 minutes
2013-09-12 23:23:32.506678 Shares: 1 (0 orphan, 0 dead) Stale rate: ~0.0% (0-80%) Efficiency: ~115.0% (23-116%) Current payout: 0.0040 BTC
2013-09-12 23:23:32.507007 Pool: 12822GH/s Stale rate: 13.0% Expected time to block: 8.1 hours
2013-09-12 23:23:33.090955 > Error submitting merged block: (will retry)
2013-09-12 23:23:33.091435 > Traceback (most recent call last):
2013-09-12 23:23:33.091744 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 551, in _runCallbacks
2013-09-12 23:23:33.092047 > current.result = callback(current.result, *args, **kw)
2013-09-12 23:23:33.092341 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1101, in gotResult
2013-09-12 23:23:33.092684 > _inlineCallbacks(r, g, deferred)
2013-09-12 23:23:33.092978 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1043, in _inlineCallbacks
2013-09-12 23:23:33.093296 > result = result.throwExceptionIntoGenerator(g)
2013-09-12 23:23:33.093633 > File "/usr/lib/python2.7/dist-packages/twisted/python/failure.py", line 382, in throwExceptionIntoGenerator
2013-09-12 23:23:33.093944 > return g.throw(self.type, self.value, self.tb)
2013-09-12 23:23:33.094229 > ------
2013-09-12 23:23:33.094468 > File "/home/p2pool/p2pool/util/deferral.py", line 41, in f
2013-09-12 23:23:33.094700 > result = yield func(*args, **kwargs)
2013-09-12 23:23:33.094928 > File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1043, in _inlineCallbacks
2013-09-12 23:23:33.095170 > result = result.throwExceptionIntoGenerator(g)
2013-09-12 23:23:33.095399 > File "/usr/lib/python2.7/dist-packages/twisted/python/failure.py", line 382, in throwExceptionIntoGenerator
2013-09-12 23:23:33.095641 > return g.throw(self.type, self.value, self.tb)
2013-09-12 23:23:33.095871 > File "/home/p2pool/p2pool/util/jsonrpc.py", line 133, in _http_do
2013-09-12 23:23:33.096102 > raise Error_for_code(resp['error']['code'])(resp['error']['message'], resp['error'].get('data', None))
2013-09-12 23:23:33.096346 > p2pool.util.jsonrpc.NarrowError: -115 Incorrect block work
2013-09-12 23:23:35.554589 P2Pool: 17304 shares in chain (8921 verified/17308 total) Peers: 6 (0 incoming)
September 12, 2013, 01:01:03 PM
I only got two Blades today, and I've just got them going on Eligius. They're NOT plug and play. Between cabling, devising a mounting and cooling system, it took me all afternoon. My head is fried. 
I'll have a go with them on p2pool at the weekend.
I'll have a go with them on p2pool at the weekend.
September 12, 2013, 12:06:28 PM
Yep, my node is down at the moment due to a popped PSU. It'll be back up in the next few days, and I'll have a couple of Blades connecting to it - along with what I'm already running, that should be ~30GH/s coming back to p2pool.
How are you running your blades on p2pool? I was using bfgminer as a getwork proxy and over 30% of the shares where rejected. What share reject rates are you getting? September 11, 2013, 03:42:51 AM
Yep, my node is down at the moment due to a popped PSU. It'll be back up in the next few days, and I'll have a couple of Blades connecting to it - along with what I'm already running, that should be ~30GH/s coming back to p2pool.
Jump to: