Now why would an internet ping have something to do with it?
Latency (ping) to the other nodes? Or is that merely latency to the local bitcoind? Sorry.
Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 527. (Read 2591920 times)
Latency (ping) to the other nodes? Or is that merely latency to the local bitcoind? Sorry.
Now why would an internet ping have something to do with it?
Upgrade your Bitcoin, Google ping has nothing to do with it.
Latency has something to do with it. I am already running 0.8.2.
Upgrade your Bitcoin, Google ping has nothing to do with it.
How do you guys keep your latency so low? My "Bitcoind GetBlockTemplate Latency" hovers around ~200ms even though my google ping is a pretty steady ~22ms. My machine is running nothing other than p2pool/bitcoind.
My efficiency right now looks OK, but in past times orphans have jumped up a bunch.
My efficiency right now looks OK, but in past times orphans have jumped up a bunch.
i'm only saying, that for now i have those result, and they are good, if i change to the one proposed by the guy with the guide, my latency goes up to 0.250s+.
anyway i can't mine for more than 16h
anyway i can't mine for more than 16h
no just 5, but they are worth 0.0145
how can you come to the conclusion that you have 0% orphans and 1% DOA and that 'default settings are best' on such a small sample
i guarantee you will get plenty of orphans with 6 outgoing connections and 0 incoming
no just 5, but they are worth 0.0145
yeah i got .045 btc with just 575MH mining for less than 24 hours, feel so good
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
so you have 100 shares and 1 doa and 0 orphans?
at 575mh in less than 24hrs?
I think he's missing a zero in there...
I was wondering if anyone has seen this?
Today I finally received my units from Feb. 2 order. One unit was almost clean, while other one is moderate dusty. After checking all connections and desoldering F1 fuse, I started to configure units. First unit has been tuned to ozco.in and that is not surprise, cos same config was on my unit from batch one. Second unit has more interesting config:
http://puu.sh/3hrak.png
As you can see, first pool is eligius.st and most important is address: https://blockchain.info/address/1AYdAw8CcrQ2wx55LTbFHRn5bxgNZhaRLW?offset=0&filter=0
716.40851602 BTC was mined from April 22 by various units. And only gods know, how much was mined on ozco.in.
So, regardles what said Yifu, the answer is: YES, Team Avalon is mining with customer units.
PS: I'm don't have any problems with fact, that Avalon is mining with my units, if this is burn test and not introducing shipment delays.
http://puu.sh/3hrak.png
As you can see, first pool is eligius.st and most important is address: https://blockchain.info/address/1AYdAw8CcrQ2wx55LTbFHRn5bxgNZhaRLW?offset=0&filter=0
716.40851602 BTC was mined from April 22 by various units. And only gods know, how much was mined on ozco.in.
So, regardles what said Yifu, the answer is: YES, Team Avalon is mining with customer units.
PS: I'm don't have any problems with fact, that Avalon is mining with my units, if this is burn test and not introducing shipment delays.
This is so slow. With hashrate down payout increased by a percent but block find rate dropped by that same percentage... now the payout's very rough. It's either everything or nothing at all. It isn't smooth and steady at all. Now that the difficulty's shot up it takes 36 hours to find a block...
Solo mining is also isn't smooth and steady at all.
yeah i got .045 btc with just 575MH mining for less than 24 hours, feel so good
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
so you have 100 shares and 1 doa and 0 orphans?
at 575mh in less than 24hrs?
This is so slow. With hashrate down payout increased by a percent but block find rate dropped by that same percentage... now the payout's very rough. It's either everything or nothing at all. It isn't smooth and steady at all. Now that the difficulty's shot up it takes 36 hours to find a block...
Sweet and congrats guys on 2 blocks today!
Now 3 blocks! Yes!!!
yeah i got .045 btc with just 575MH mining for less than 24 hours, feel so good
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
default settings are the best, 130 efficiency 0 orphaned and only 1% doa
Sweet and congrats guys on 2 blocks today!
We gotta get bfl to work
They just open sourced the firmware. Implementing a custom nonce range might be what is needed to get BFL SCs to work with p2pool.
https://forums.butterflylabs.com/announcements/913-bitforce-sc-communication-protocol-draft-revision-2-a-8.html#post31853
Really strange but one of my friends who mines on my pool noticed he hasn't been getting any payout for his address on my LTC pool since Saturday. (he keeps a 200kh miner running most days at his work place that gets a small payout and adds his 7970 some days to boost the payout)
http://p2pool.dyndns.info:9327/static/graphs.html?Week
Graph for the week shows his payout just seem to have stopped on Friday after he turned off his 7970.
I've been running a miner non stop for the last few hours to check myself.
I've not changed anything, I've only restarted the LTC client and pool, connected a miner a few hours ago and still nothing.
Has anyone else ever had the same issues?
http://p2pool.dyndns.info:9327/static/graphs.html?Week
Graph for the week shows his payout just seem to have stopped on Friday after he turned off his 7970.
I've been running a miner non stop for the last few hours to check myself.
I've not changed anything, I've only restarted the LTC client and pool, connected a miner a few hours ago and still nothing.
Has anyone else ever had the same issues?
In your graph you have miners using Litecoin addresses to connect: their payout is not shown in the "Current payout to default address" which is perfectly normal.
Your friends should check the value for their address in the "Payouts if a block were found NOW" section. On LTC payouts quickly drop to zero as the rate of blocks is quite fast and P2Pool looks for share produced approximately during the last 12 blocks.
Really strange but one of my friends who mines on my pool noticed he hasn't been getting any payout for his address on my LTC pool since Saturday. (he keeps a 200kh miner running most days at his work place that gets a small payout and adds his 7970 some days to boost the payout)
http://p2pool.dyndns.info:9327/static/graphs.html?Week
Graph for the week shows his payout just seem to have stopped on Friday after he turned off his 7970.
I've been running a miner non stop for the last few hours to check myself.
I've not changed anything, I've only restarted the LTC client and pool, connected a miner a few hours ago and still nothing.
Has anyone else ever had the same issues?
http://p2pool.dyndns.info:9327/static/graphs.html?Week
Graph for the week shows his payout just seem to have stopped on Friday after he turned off his 7970.
I've been running a miner non stop for the last few hours to check myself.
I've not changed anything, I've only restarted the LTC client and pool, connected a miner a few hours ago and still nothing.
Has anyone else ever had the same issues?
Does anyone know why with Ufasoft CPU miner, I keep getting "Stratum authentication failed", but when I add --no-stratum it works?
haha, too funny!1) dont CPU mine
2) there are faster CPU miners
use cgminer or pooler's CPUminer
i have some xeons not doing anything, they get like 35mhash with minerd
oh, cool, looks like it was updated just a few hrs ago
hoho, that is minerd. but i didnt know there was a new version
[2013-06-15 14:30:06] thread 12: 4357092 hashes, 1793 khash/s
[2013-06-15 14:30:06] accepted: 1/1 (100.00%), 26910 khash/s (yay!!!)
stratum wouldn't work for me either
We gotta get bfl to work
Agreed mine should be here soon and I really want to stay with p2pool.
Jump to: