I just started using your pool, and I plan to mine there full time. I have a question about the worker stats, though. I have two miners, each mining at about 400 Mhash/s. However, in the worker stats, it shows only one miner has found any shares today. Both my miners say they've submitted approx 400 shares, but on the stats page it shows one (Kieslar.2) has submitted 429 at 377 MHash/s, and the other (Kieslar.1) has submitted 29 at 0 MHash/s. Is there a reason for that? Thanks!
Edit: I created a new worker (Kieslar.desktop1) and switched the miner whose stats wasn't showing up to that one and it seems to be updating the stats now.
Topic: [18 GH] Swepool.net 0% fee proportional, LP, API, SSL! - page 15. (Read 42055 times)
Settings page bug now fixed and pool software configurations updated for increased connection stability in the future.
I'm curious what the formula is for calculating the PPS rate, since obviously the rate has changed since the difficultly update.
It's 46/[current difficulty].Been trying out swepool for the last day or so... noticing some intermittent connection problems on my miners but generally they seem to reconnect after a few seconds to a minute or two.
I noticed in the settings page I cannot change my payout address. Tried several times and always just get a blank page after clicking "Save" and the old address is still there when I go back to Profile.
I'm curious what the formula is for calculating the PPS rate, since obviously the rate has changed since the difficultly update.
Been trying out swepool for the last day or so... noticing some intermittent connection problems on my miners but generally they seem to reconnect after a few seconds to a minute or two.
I noticed in the settings page I cannot change my payout address. Tried several times and always just get a blank page after clicking "Save" and the old address is still there when I go back to Profile.
I am unable the connect my miner anymore, the website still appears operational but you have a 0 Gh/s pool rate.
Edit: Its working again now.
Edit: Its working again now.
Works now. Thank you :-)
I get an HTTP error 500 when I try to cashout ..
Fixed about an hour ago, please try again and report if there are any errors.Added average weighting to hashspeed, should be more accurate now.
I get an HTTP error 500 when I try to cashout ..
It's a trap! =P
I get an HTTP error 500 when I try to cashout ..
Hey Dinox, I just joined the pool. When I went to look at my profile page it said I was mining at 74mh/s when i am actually around 130mh/s. Is there an error somewhere or does it just take time to update?
Regardless of which pool youre mining on, Ive never found those gauges to be accurate.
When I was on deepbit my mhash/s for one of my miners listed anywhere from 150mhash - 250mhash (actual is 220). My payout was always at what I would expect it to be..there just seems to be some variance on the monitor side.
Indeed, since what is shown on the website is an estimate based on the rate at which you submit shares; whereas the mining program is showing the actual rate at which you are computing hashes.
First block is now solved!
http://blockexplorer.com/t/7U9fXhJkjW
I'm working on a average based view of hashspeed which probably will be more accurate than the current one.
http://blockexplorer.com/t/7U9fXhJkjW
I'm working on a average based view of hashspeed which probably will be more accurate than the current one.
Isn't a zero fee the lowest fee? => http://forum.bitcoin.org/index.php?topic=4251.0
Not that I really get all the fine details of this model vs that model vs another model of shares and whether or not stale blocks still get payouts etc.
Not that I really get all the fine details of this model vs that model vs another model of shares and whether or not stale blocks still get payouts etc.
i'm use poclbm/201102.beta
to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
Pushpool hang about one hour ago with tons of error messages, a restart fixed the problem. I'm checking what the problem was and how to prevent it in the future right now.to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
i'm use poclbm/201102.beta
to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
Pushpool hang about one hour ago with tons of error messages, a restart fixed the problem. I'm checking what the problem was and how to prevent it in the future right now. to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
i'm use poclbm/201102.beta
to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
to commands getwork pool say:
wireshark cut: {u'result': None, u'id': u'poclbm/201102.beta', u'error': {u'message': u'upstream RPC error', u'code': -2}}
what is the problem?
(I beg forgiveness for the translation)
Hey Dinox, I just joined the pool. When I went to look at my profile page it said I was mining at 74mh/s when i am actually around 130mh/s. Is there an error somewhere or does it just take time to update?
Regardless of which pool youre mining on, Ive never found those gauges to be accurate.
When I was on deepbit my mhash/s for one of my miners listed anywhere from 150mhash - 250mhash (actual is 220). My payout was always at what I would expect it to be..there just seems to be some variance on the monitor side.
Hey Dinox, I just joined the pool. When I went to look at my profile page it sas I am mining at 74mh/s when i am actually around 130mh/s. Is there an error somewhere or does it just take time to update?
I'm getting a ton of miner is idle messages, Is this a pool issue or an issue with me? (I'm from the USA..)
Another question, is your website caching the profile page at all?
Because when I found my first share it updated and added it instantly, however it has not updated or added any of the shares I've submitted since then.
The info is updated every 15 min, you should soon see your submitted shares.Because when I found my first share it updated and added it instantly, however it has not updated or added any of the shares I've submitted since then.
Yeah they just came through just after I posted that *doh*.
It may be worth noting that somewhere on the page to avoid further confusion?
Jump to: