1Ths Dragon Miner Raspberry PI Firmware

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pekatete on July 15, 2015, 03:29:24 PM

^^^^ And that is the plague of signature campaigns striking .... basically nothing to add to (not even negate) what has already been said.

I appolgize if it was worded wrong. I have used many dragon 1t A1's and not experienced the "s2 syndrom". I was negating that setting a 1T dragon to 512 really making much of a difference.

I believe the default is 256, and it has no issues at this. So I was meaning to negate your statement of 1T dragons having as you call it "s2 syndrom"

Hopefully that clears it up. Pekatete have you owned a Dragon 1T?

pekatete

hero member

Activity: 518

Merit: 500

^^^^ And that is the plague of signature campaigns striking .... basically nothing to add to (not even negate) what has already been said.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pekatete on July 15, 2015, 10:49:12 AM

Quote from: pielbeer on July 15, 2015, 10:31:59 AM

thx for the reply all off you, s2 syndrome what is that

If the diff is set low, then the software on the rig may get into a loop (for lack of a better word) trying to submit so many shares in a very short space of time that it crashes the rig before the pool has a chance of adjusting share diff. I personally always set my rigs' diffs higher than their rated speed (as I know the pools I mine on will lower / set it appropriately after a while).

I have used the dragon 1T and 1.5T. Really 256-512 it does not make much of a difference.

Once you connect to a decent pool it automatically adjusts the difficulty. The dragons are pretty much set and forget if using a good pool. They seem to have a very long lifespan (minus the PSU's used in them).

pekatete

hero member

Activity: 518

Merit: 500

Quote from: pielbeer on July 15, 2015, 10:31:59 AM

thx for the reply all off you, s2 syndrome what is that

If the diff is set low, then the software on the rig may get into a loop (for lack of a better word) trying to submit so many shares in a very short space of time that it crashes the rig before the pool has a chance of adjusting share diff. I personally always set my rigs' diffs higher than their rated speed (as I know the pools I mine on will lower / set it appropriately after a while).

pielbeer

newbie

Activity: 4

Merit: 0

Quote from: pekatete on July 14, 2015, 04:14:24 PM

Quote from: pielbeer on July 14, 2015, 10:38:55 AM

al sorted out, thx for the help.

one last question,
I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool.
if i look at my dashboard at f2 it does not reach 1 th/s

greetings

Set it to at least half the speed that you've seen it hash (or what it is rated to hash) to be on the safe side, i.e if you see 1Th/s, set it at 512 and the pool will take it from there; that way you avoid the classic S2 syndrome!

thx for the reply all off you, s2 syndrome what is that

pekatete

hero member

Activity: 518

Merit: 500

Quote from: pielbeer on July 14, 2015, 10:38:55 AM

al sorted out, thx for the help.

one last question,
I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool.
if i look at my dashboard at f2 it does not reach 1 th/s

greetings

Set it to at least half the speed that you've seen it hash (or what it is rated to hash) to be on the safe side, i.e if you see 1Th/s, set it at 512 and the pool will take it from there; that way you avoid the classic S2 syndrome!

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pielbeer on July 14, 2015, 10:38:55 AM

al sorted out, thx for the help.

one last question,
I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool.
if i look at my dashboard at f2 it does not reach 1 th/s

greetings

It does not matter what you set it to for most pools. It will automatically pick difficulty based on your speed connected to pool.

So yea set it to 256 or something. But you will be fine it does not matter. Also might look into antpool it has PPS at 2.5 percent vs f2pool 4 percent.

pielbeer

newbie

Activity: 4

Merit: 0

al sorted out, thx for the help.

one last question,
I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool.
if i look at my dashboard at f2 it does not reach 1 th/s

greetings

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pielbeer on July 12, 2015, 05:40:51 AM

Quote from: notlist3d on July 11, 2015, 07:47:02 PM

Quote from: pielbeer on July 11, 2015, 06:29:26 PM

hi there,

is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card

I think you could change it if you mount in linux, I have not tried it to see if it works. But you would be able to edit the file.

Easiest would set computer or 2nd router to IP range log into miner and change it. Make sure to make a backup of your SD card before doing it. But that is a odd IP range doubt anyone has a image ready for it.

how would i do this with a computer, my isp wont let me change my range it is 192.168.2.xxx can change it

You might call up ISP tell them the router is causing troubles and you want "bridged" mode. This allows you to have your router instead of their all in one.

But plug ethernet cable from dragon into computer's ethernet. Configure them on same IP range. Then go to machine and change it to proper settings.

Make sure to make a backup of your SD card before trying any of this.

pielbeer

newbie

Activity: 4

Merit: 0

Quote from: notlist3d on July 11, 2015, 07:47:02 PM

Quote from: pielbeer on July 11, 2015, 06:29:26 PM

hi there,

is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card

I think you could change it if you mount in linux, I have not tried it to see if it works. But you would be able to edit the file.

Easiest would set computer or 2nd router to IP range log into miner and change it. Make sure to make a backup of your SD card before doing it. But that is a odd IP range doubt anyone has a image ready for it.

how would i do this with a computer, my isp wont let me change my range it is 192.168.2.xxx can change it

bgibso01

legendary

Activity: 1218

Merit: 1001

Easiest approach would be to direct ethernet to your laptop/computer. Switch laptop/computer to same network and then web into the dragon and change in the gui to what network you want.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pielbeer on July 11, 2015, 06:29:26 PM

hi there,

is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card

I think you could change it if you mount in linux, I have not tried it to see if it works. But you would be able to edit the file.

Easiest would set computer or 2nd router to IP range log into miner and change it. Make sure to make a backup of your SD card before doing it. But that is a odd IP range doubt anyone has a image ready for it.

pielbeer

newbie

Activity: 4

Merit: 0

hi there,

is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card

bgibso01

legendary

Activity: 1218

Merit: 1001

https://www.dropbox.com/s/wuyjuyjx8etjw5a/dragon-with-red-box-ip-192.168.178.73.zip?dl=0

This is the firmware that doesn't allow SSH.

AtomicStrike

sr. member

Activity: 380

Merit: 251

Quote from: daddyfatsax on June 22, 2015, 10:42:05 AM

https://docs.google.com/file/d/0B4Te4nFfJzgjbDVEQ0FValhXa1U/edit

Try that one. It should still be working. I uploaded it a while ago.

I try this FW, but seems it has no autostart on my miner. Can anybody help me?

eretron

full member

Activity: 156

Merit: 100

Quote from: daddyfatsax on June 22, 2015, 10:42:05 AM

https://docs.google.com/file/d/0B4Te4nFfJzgjbDVEQ0FValhXa1U/edit

Try that one. It should still be working. I uploaded it a while ago.

Will give it a try tomorrow.

Thanks.

eretron

full member

Activity: 156

Merit: 100

It would be great if anyone could do a fresh copy of firmware...

Do you know is it one with default ssh password or one with altered?

Thanks

Finksy

legendary

Activity: 1022

Merit: 1003

Same here

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

i am still running the 4 board 1 ths models.. if you need a firmware i can make one fresh tomorrow and get it uploaded for you..

Best Regards
d57heinz

bgibso01

legendary

Activity: 1218

Merit: 1001

I've got:

dragon-with-red-box-ip-192.168.178.73

stuck away on a NAS that I can upload if necessary. Just let me know if no one has one posted.

Topic: 1Ths Dragon Miner Raspberry PI Firmware (Read 4109 times)