Topic: 30GH/s Chili Miners - Fast Auction (50 Available) - page 7. (Read 6750 times)
10 @ .5
1 @ 0.55
4 @ .6
4 @ 0.55 Thanks
Current Bids
ipextreme: 4 @ 0.55
jski: 1 @ 0.55
turtle83: 20 @ 0.5
GrapeApe: 3 @ 0.5
DebitMe: 2 @ 0.5
hephaist0s: 2 @ 0.5
jelin1984: 1 @ 0.5
JakeTri: 3 @ 0.5
HotSwap: 2 @ 0.5
nexus99: 2 @ 0.5
Jamon: 2 @ 0.5
miaviator: 8 @ 0.5
Outbid
miaviator: 42 @ 0.5
olly_k: 4 @ 0.5
ipextreme: 4 @ 0.55
jski: 1 @ 0.55
turtle83: 20 @ 0.5
GrapeApe: 3 @ 0.5
DebitMe: 2 @ 0.5
hephaist0s: 2 @ 0.5
jelin1984: 1 @ 0.5
JakeTri: 3 @ 0.5
HotSwap: 2 @ 0.5
nexus99: 2 @ 0.5
Jamon: 2 @ 0.5
miaviator: 8 @ 0.5
Outbid
miaviator: 42 @ 0.5
olly_k: 4 @ 0.5
Are those ARCTIC Accelero Mono PLUS Coolers in the OP photo? More importantly is the mining screenshot of a unit with one of those coolers?
Those are Mono Plus coolers in the photo. The hashing photo is from a couple units I have with Antec Kuhler Shelf's, and the one in the link uses (I believe) Coolermaster Hyper 212 Evos. I am not sure on what kind of hashrates you could get with the Mono Plus. In our test setup they get pretty awful hashrate (15-25GH/s), but we use a carbon based thermal interface attached with adhesive to the heatsink. It's a relatively terrible interface material, but it's tough enough to withstand hundreds of mount/dismount cycles. With just grease I'd guess they'd do about as well as the Twin Turbo II. 
Are those ARCTIC Accelero Mono PLUS Coolers in the OP photo? More importantly is the mining screenshot of a unit with one of those coolers?
4 @ .50
1 @ 0.55
ALL of them.
50 @ .5
I should be outbid in about 8 hours so these are follow-up bids if the above lands 0 devices:
1 @ .70
1 @ .65
1 @ .55
50 @ .5
I should be outbid in about 8 hours so these are follow-up bids if the above lands 0 devices:
1 @ .70
1 @ .65
1 @ .55
1 @ 0.5
Email bid (newbie jail restriction) for 2 @ 0.5
2 @ .5
2 @ 0.5
you should get an email from fabio from italy
thank you guys
thank you guys
I would like
3 @ 0.5
3 @ 0.5
Some questions (apologies if they are answered in chilli thread, didnt have patience to read the entire 44 pages).
1) How much max Watts per chilli ?
2) Do they come preflashed? Or i need to prepare a windoze computer to run the flash utility?
3) Is Chilli supported by mainline cgminer? Or need to use a custom fork? If fork then can i see the source?
1) When they're running full out at 38-40GHs, I'm getting around 220W at the wall. Running at 30-32GH/s, 130W at the wall although the firmware to manually set the voltage and frequency is still pending.1) How much max Watts per chilli ?
2) Do they come preflashed? Or i need to prepare a windoze computer to run the flash utility?
3) Is Chilli supported by mainline cgminer? Or need to use a custom fork? If fork then can i see the source?
2) They do come preflashed. You only need to update the firmware if there's a new feature or bugfix you need.
3) It's supported by mainline cgminer. I'm using 3.8.5, it has an update that actually lets you see the ASIC voltage rail instead of just reading 3.3V like all BFL based devices previously did.
Some questions (apologies if they are answered in chilli thread, didnt have patience to read the entire 44 pages).
1) How much max Watts per chilli ?
2) Do they come preflashed? Or i need to prepare a windoze computer to run the flash utility?
3) Is Chilli supported by mainline cgminer? Or need to use a custom fork? If fork then can i see the source?
1) How much max Watts per chilli ?
2) Do they come preflashed? Or i need to prepare a windoze computer to run the flash utility?
3) Is Chilli supported by mainline cgminer? Or need to use a custom fork? If fork then can i see the source?
one at 0.5 btc
please
please
So if I buy one in the auction will I just need a heatsink and a power supply for these? Any modified cables for the power supplies or does it just take a 6 pin connector? Does it come with the USB cable?
Do you have a link to where I could purchase a heatsink that would work with these?
Thanks
2 @ .5
Do you have a link to where I could purchase a heatsink that would work with these?
Thanks
2 @ .5
First this should answer all of your questions:
We are selling some of our remaining stock of Chili miners from batch 3. There are 50 units available in this auction.
See the Chili thread itself for more details on the boards.
(Previous auction thread here: https://bitcointalksearch.org/topic/new-bfl-based-chili-miners-30ghs-nominal-334841)
See the Chili thread itself for more details on the boards.
(Previous auction thread here: https://bitcointalksearch.org/topic/new-bfl-based-chili-miners-30ghs-nominal-334841)
You will need to buy your own cooler and power supply, standard 6 pin PCI express and no it doesn't come with a USB cable.
Jump to: