Pages:
Author

Topic: [350TH][Auto Profit-switching ASIC Pool] Multipool.us 5-10%+ Profit vs. BTC (Read 4660 times)

legendary
Activity: 3094
Merit: 1472
BCH is usually more profitable to mine than BTC, and is the most common setting at Multipool.us.

Meanwhile, BTC is being mined normally, with 22 blocks found yesteday. But BCH remains a bottomless pit for hashpower at Multipool.us. And even worse, reward system is PPLNS so most people who invested hash power into this pool won't see any reward when a block is finally found 4-5-10 days from now.

That's because multipool mines BTC on Slushpool which has 2700-2800 PH hashrate. By mining you are pool mining with others on Slushpool as well and have a good chance of hitting blocks in a day. While in case of BCH, multipool are mining as individual in BCH network and pool hashrate is not that good against the network hashrate to get 1/day

I would say better to

1)Switch to solo pool for BCH if you are mining on a pool with low hashrate. Atleast you will have a full block reward but then again risks are very high as you may/or may not find block (depending upon luck)

2) Or, mine in mining pool with high hashrate (eg. viabtc) to have a good payout daily if you are worried about payout.
newbie
Activity: 33
Merit: 0
This seems like an appropiate thread to say a few words about Multipool.us, the auto-switching pool that mines the most profitable coin.

It just switched to BCH again, and that, my friends, means that everyone's hash power - around 10 PH/s - is going to waste. Last BCH block was found by this pool on 14 Jan 2018, or 22 days ago. A total of 4 blocks have been found in January, and 3 have been found in December 2017.

BCH is usually more profitable to mine than BTC, and is the most common setting at Multipool.us.

Meanwhile, BTC is being mined normally, with 22 blocks found yesteday. But BCH remains a bottomless pit for hashpower at Multipool.us. And even worse, reward system is PPLNS so most people who invested hash power into this pool won't see any reward when a block is finally found 4-5-10 days from now.

Until this is resolved, it is a total waste of money to be sending hashpower to Multipool.us auto-switching pool or to mine BCH directly at this pool. This pool has serious technical problems and you're just throwing your money down the drain.
full member
Activity: 183
Merit: 100
Withdrawals not being processed here
full member
Activity: 196
Merit: 100
Problem meanwhile solved, thanks!
full member
Activity: 196
Merit: 100
Didn't get any reply in your IRC channel or by mail, so I'm trying it this way.

Is there a problem with NAUT at multipool?

Mined this coin 2 days ago for a while, bfgminer and cgminer showed at least 10 found blocks. My Round shares were counted, then suddenly disappeared, later appeared and disappeared again. Neither Next Block Estimate nor unconfirmed Balance moved away from 0 although your pool stats for NAUT showed found blocks.

Til now I didn't get any credit for the accepted shares and my Round Shares still show and disappear randomly.

Didn't have any problem until this with your pool, so I don't know what happened.

Thanks for taking care.
full member
Activity: 183
Merit: 100
IS the email [email protected] answering support queries? is there somewhere that I can open support ticket?
legendary
Activity: 2212
Merit: 1001
Had a power failure,now I can't connect to the pool...................  Roll Eyes

Anyone else having a similar issue  Huh

Off to coinotron.................  Angry
full member
Activity: 183
Merit: 100
I cant access front end here. is there a problem?

Edit:
awesome I am back in.
Been down for hours for me but started working just now.
hero member
Activity: 938
Merit: 1000
www.multipool.us
No Flound thank you. I love your pool and I believe ipominer is yours as well. Your customer service is great. I don't believe I have ever seen the pool go down for any reason. So thank you for the great pool I make more money with my old block erupter cubes here than anywhere else. Ok butt kissing off lol.

Thanks

Steve

No problem thanks Steve Smiley
full member
Activity: 182
Merit: 100
No Flound thank you. I love your pool and I believe ipominer is yours as well. Your customer service is great. I don't believe I have ever seen the pool go down for any reason. So thank you for the great pool I make more money with my old block erupter cubes here than anywhere else. Ok butt kissing off lol.

Thanks

Steve
hero member
Activity: 938
Merit: 1000
www.multipool.us
Any interest in adding TeKcoin to the sha 256 multipool it seems to be a very interesting coin. Its coming alive in the last few weeks. Hopefully it or another sha 256 coin will become a viable alternative to bitcoins. Competition among coins is always good.

Steve

I am looking at it, thanks.
full member
Activity: 182
Merit: 100
Any interest in adding TeKcoin to the sha 256 multipool it seems to be a very interesting coin. Its coming alive in the last few weeks. Hopefully it or another sha 256 coin will become a viable alternative to bitcoins. Competition among coins is always good.

Steve
hero member
Activity: 938
Merit: 1000
www.multipool.us
Im trying to mine script on mutipool using a 35mhs asic.


Problem im getting though is its only showing my hashrate as around 6000khs when really it should be 30,000-32,000 khs.

I know my miners ok because ive used it on script guild and it shows the correct expected hashrate,.

Can anyone explain why multipool does this?  ive tried different settings etc to no avail.   Angry

The hashrate is a 10 minute average, if we're switching coins a lot it might not have time to display fully on a single Coin.  If you are seeing accepted shares things are working fine, but you want to verify you can leave it on a single Coin port for 15-20 minutes and it should come to full.
newbie
Activity: 3
Merit: 0
Im trying to mine script on mutipool using a 35mhs asic.


Problem im getting though is its only showing my hashrate as around 6000khs when really it should be 30,000-32,000 khs.

I know my miners ok because ive used it on script guild and it shows the correct expected hashrate,.

Can anyone explain why multipool does this?  ive tried different settings etc to no avail.   Angry
hero member
Activity: 938
Merit: 1000
www.multipool.us
Thanks for your response. My issue is definitely on my end. I am not sure how to even set up the stratum to mine on Multipool.us I would love to put my sha as most of my scrypt hash is already on your sister site IPominer. 

So if you can walk me through setting up the stratum program itself that would be fantastic.

Steve

Send me an email with some info about your setup and I'll try to help you out as best I can.
full member
Activity: 182
Merit: 100
Thanks for your response. My issue is definitely on my end. I am not sure how to even set up the stratum to mine on Multipool.us I would love to put my sha as most of my scrypt hash is already on your sister site IPominer. 

So if you can walk me through setting up the stratum program itself that would be fantastic.

Steve
hero member
Activity: 938
Merit: 1000
www.multipool.us
Sorry flound, I am trying to proxy block erupter cubes. I will have to remote in as I am out of town. Any advice would be helpfull.

Steve

I've heard of people having issues with stratum proxy back when we were on p2pool, but nothing recently.  Let me know what issue you are having and I can try to help you figure it out.
full member
Activity: 182
Merit: 100
Sorry flound, I am trying to proxy block erupter cubes. I will have to remote in as I am out of town. Any advice would be helpfull.

Steve
hero member
Activity: 938
Merit: 1000
www.multipool.us
Nice share...

Not sure what you mean..  Are you having issues?  If so please post and I'll try to resolve them.
hero member
Activity: 938
Merit: 1000
www.multipool.us
Need some help setting up stratum proxy. I use slush's as I also mine x11 and can't get multiiminer to work x11 and stratum at the same time.

Steve

What are you proxying?
Pages:
Jump to: