[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 434.

kabopar

hero member

Activity: 616

Merit: 500

Quote from: manubar82 on January 25, 2014, 04:28:36 AM

had some issues with my newly bought bitfurys.
just wanted to share this experience:
cgminer 3.8.4 did not work well with these things, i use bfgminer 3.10 right now. so far my HW Error rate dropped from 65%(!) to 3.2% (still dropping)

Do you mean the USB Blue Fury or Red Fury or the bitfury based boards (there are quite a few of those including Drillbit and others)?
Both the latest cgminer and bfgminer support the USB miners, and some of the boards. I also use bfgminer 3.10 with some of these and cgminer 3.10 with others. What sort of hash rate are you getting? There is a support thread for for the Blue/Red Fury at https://bitcointalksearch.org/topic/blue-fury-support-thread-319419

Cheers

patnor1011

member

Activity: 114

Merit: 100

Hi guys, just quick question for people who do have some of those new 200+gh avalon units. I am not sure if I do have miner count set correctly it is at 16 right now. Second thing I do not know what HW means, number is sometimes equal, or higher, but mostly at one third of accepted number.

manubar82

newbie

Activity: 28

Merit: 0

had some issues with my newly bought bitfurys.
just wanted to share this experience:
cgminer 3.8.4 did not work well with these things, i use bfgminer 3.10 right now. so far my HW Error rate dropped from 65%(!) to 3.2% (still dropping)

tom99

sr. member

Activity: 420

Merit: 250

I think HashFast shipped out miner h/w that why.

kabopar

hero member

Activity: 616

Merit: 500

Just noticed that network difficulty rose to 2193847870, which is about 23%.

Cheers

ccualumni

newbie

Activity: 55

Merit: 0

Quote from: J_Dubbs on January 25, 2014, 12:20:51 AM

I still haven't messed with multi-miner, but I did buy his app because I plan to try it out. Typically (always) you will put the worker info into the mining software. Also, make sure you use correct pool URL. Then go to Slush>my account login and make sure the "last share at" column says "0 minutes" for that worker and shares etc are accumulating.

I like the set up and ease of use for multiminer. I have also used the bitminter software as well.

There are several others that I just cannot figure out.

I have the below information from slush's page.

I am not sure how to change or update the "Last share at" setting. I tried to use the EDIT button, but there was nothing there to change.

When setting up the pool settings in my miner would it be:
Host: http://api.bitcoin.cz
Worker Name: MYLOGINNAME
Password: XXXXXXXXXXX

Or would it be:
Host: http://api.bitcoin.cz
Worker Name: MYLOGINNAME.worker1
Password: XXXXXXXXXXX

Login........................Password............Found blocks...Current shares...Score....Last share at.....Mhash/s*...Actions
MYLOGINNAME.worker1.......XXXXXXXXXXX....0...................0................. ....0..........- ....................0.......... Edit |

Thanks

J_Dubbs

sr. member

Activity: 322

Merit: 250

Quote from: ccualumni on January 24, 2014, 11:44:29 PM

I think I put in the wrong password in Multiminer as I have been mining for 2 days and have nothing to show for it in Slush's pool.

It asks for my miner name then password. I used the password for the site, but am thinking I was supposed to use my password for my worker.

Does anyone know which one I am supposed to use?

Thanks

I still haven't messed with multi-miner, but I did buy his app because I plan to try it out. Typically (always) you will put the worker info into the mining software, and don't worry about making it strict, worst-case scenario is someone accidentally aims their miner at your worker account (very unlikely though). Also, make sure you use correct pool URL. Then go to Slush>my account login and make sure the "last share at" column says "0 minutes" for that worker and shares etc are accumulating.

ccualumni

newbie

Activity: 55

Merit: 0

I think I put in the wrong password in Multiminer as I have been mining for 2 days and have nothing to show for it in Slush's pool.

It asks for my miner name then password. I used the password for the site, but am thinking I was supposed to use my password for my worker.

Does anyone know which one I am supposed to use?

Thanks

J_Dubbs

sr. member

Activity: 322

Merit: 250

Quote from: ppt on January 24, 2014, 10:56:28 PM

hi newbie to the slush pool and bitcoin mining for that matter

i started mining using guiminer cos i am no good with the command prompt stuff.
if i get some usb erupter would that work with guiminer?

My first software used was GUI miner, and I'm not a techie either. Just jump into bfgminer and figure it out, a living brain is a learning brain. You will get good at everything through failing fast and getting mistakes out of the way early; GUI miner is a mistake, learn and move on, faster the better.

Everything you need to know is here:
https://forums.butterflylabs.com/showwiki.php?title=Tutorials:Getting+Started+With+CGminer+BFGminer

ppt

newbie

Activity: 1

Merit: 0

hi newbie to the slush pool and bitcoin mining for that matter

i started mining using guiminer cos i am no good with the command prompt stuff.
if i get some usb erupter would that work with guiminer?

ZephramC

sr. member

Activity: 475

Merit: 255

Quote from: Sonya on January 24, 2014, 02:15:46 PM

Quote from: kkurtmann on January 24, 2014, 03:55:41 AM

Quote from: Sonya on January 24, 2014, 01:32:52 AM

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

sorry to be a killjoy for you, but occasional mining at 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any favours at todays hashrate.

Yeah, we'll be going the usb route, I'm thinking 2 ant miners and 2 erupters (for starters) in the next week or two and hopefully work our way up a bit more as we go, and just occasionally use the gpus for a little boost from time to time.

Yes. The fun part is very important. After all, 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any harm either. :-)

Sonya

newbie

Activity: 42

Merit: 0

Quote from: Trongersoll on January 24, 2014, 02:23:57 PM

Quote from: Sonya on January 24, 2014, 02:15:46 PM

Quote from: kkurtmann on January 24, 2014, 03:55:41 AM

Quote from: Sonya on January 24, 2014, 01:32:52 AM

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

sorry to be a killjoy for you, but occasional mining at 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any favours at todays hashrate.

Yeah, we'll be going the usb route, I'm thinking 2 ant miners and 2 erupters (for starters) in the next week or two and hopefully work our way up a bit more as we go, and just occasionally use the gpus for a little boost from time to time.

Run the GPUs if ya want. It is an easy way to decide if ya like what you are doing. Even USBs can be a losing proposition, but it is a foot in the door. There is more to life than just profits. Have fun and enjoy what you are doing. There is enjoyment to be found by some in just seeing their hashrate grow from adding new equipment over time. And then, there is the race to increase your hashrate faster than the difficulty rises. This is a losing game but it can be addicting.

That's the plan

We'll start somewhat small and I'm hopeful work our way up, we just need to get our feet wet before diving in.

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: Sonya on January 24, 2014, 02:15:46 PM

Quote from: kkurtmann on January 24, 2014, 03:55:41 AM

Quote from: Sonya on January 24, 2014, 01:32:52 AM

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

sorry to be a killjoy for you, but occasional mining at 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any favours at todays hashrate.

Yeah, we'll be going the usb route, I'm thinking 2 ant miners and 2 erupters (for starters) in the next week or two and hopefully work our way up a bit more as we go, and just occasionally use the gpus for a little boost from time to time.

Run the GPUs if ya want. It is an easy way to decide if ya like what you are doing. Even USBs can be a losing proposition, but it is a foot in the door. There is more to life than just profits. Have fun and enjoy what you are doing. There is enjoyment to be found by some in just seeing their hashrate grow from adding new equipment over time. And then, there is the race to increase your hashrate faster than the difficulty rises. This is a losing game but it can be addicting.

Sonya

newbie

Activity: 42

Merit: 0

Quote from: kkurtmann on January 24, 2014, 03:55:41 AM

Quote from: Sonya on January 24, 2014, 01:32:52 AM

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

sorry to be a killjoy for you, but occasional mining at 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any favours at todays hashrate.

Yeah, we'll be going the usb route, I'm thinking 2 ant miners and 2 erupters (for starters) in the next week or two and hopefully work our way up a bit more as we go, and just occasionally use the gpus for a little boost from time to time.

kkurtmann

sr. member

Activity: 475

Merit: 250

Quote from: PostMixer on January 23, 2014, 11:23:35 PM

If you get the bug, like i did, it starts with the on hand GPU's and goes up from there. But if you want to make any real progress you will have to be talking in at least Gh/s not Mh/s. I agree with the USB approach. Great way to get started. Welcome to the pool!

I got the bug, like you did, and it happened just like you said, but I started with the cpu's just as the gpu's got going.

kkurtmann

sr. member

Activity: 475

Merit: 250

Quote from: Sonya on January 24, 2014, 01:32:52 AM

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

sorry to be a killjoy for you, but occasional mining at 80-100MH/s X 300watts isn't doing you, or the network, or the environment, any favours at todays hashrate.

Sonya

newbie

Activity: 42

Merit: 0

Thanks everyone for the advice. I'll definitely check out both, in the meantime I'll use the video cards occasionally.

errkal

newbie

Activity: 16

Merit: 0

Quote from: ccualumni on January 23, 2014, 11:20:11 PM

Quote from: errkal on January 23, 2014, 10:55:08 PM

Quote from: J_Dubbs on January 23, 2014, 10:53:06 PM

Quote from: Sonya on January 23, 2014, 09:53:25 PM

Quote from: kkurtmann on January 23, 2014, 09:16:43 PM

Quote from: Sonya on January 23, 2014, 06:53:12 PM

I just started this today, and to be honest I have no idea how this really works. I have been mining since around 1 pm (almost 6 hours). I have a NVIDIA card (4 gig) gtx 680 FTW, which shows to be getting between 114-117.6 Mhash, however my account info only shows 80Mhash. I also notice the more shares (currently 420) I have the lower my estimated reward drops.

80MH/s sounds about right for a high end Nvidia, hope you got free electricity or you will be paying a lot for the bit dust you mine. good luck Grin

and welcome to the pool.

Hopefully it won't up my bill much, but if so I guess this will just be an occasional thing.

You should consider at least just starting with a USB block erupter. For $30 you can get 300mh/s and don't need to worry about burning out the GPU. Back in early November a USB erupter was $10, either way it's better than beating on the GPU, assuming the computer has some alternate uses other than mining...

I would say getting an ANT Miner is a better option, they don't cost a great deal more but they have a much better hashing power.

I just bought the blade eruptor, but you feel the ant minter is better?? Can I run one of each at a time?

Yeah they are, they aren't too much more cost wise, but run at 1.6 ghash/sec by defaul but can be over clocked, I have mine running at 2ghash/sec each.

You can run them side by side yeah. I use minepeon on a raspberry pi and the cgminer and bfminer in peon doesn't support the ants out the box so you have to re-compile it to include the driver but its easy enough.

PostMixer

newbie

Activity: 53

Merit: 0

If you get the bug, like i did, it starts with the on hand GPU's and goes up from there. But if you want to make any real progress you will have to be talking in at least Gh/s not Mh/s. I agree with the USB approach. Great way to get started. Welcome to the pool!

ccualumni

newbie

Activity: 55

Merit: 0

Quote from: errkal on January 23, 2014, 10:55:08 PM

Quote from: J_Dubbs on January 23, 2014, 10:53:06 PM

Quote from: Sonya on January 23, 2014, 09:53:25 PM

Quote from: kkurtmann on January 23, 2014, 09:16:43 PM

Quote from: Sonya on January 23, 2014, 06:53:12 PM

I just started this today, and to be honest I have no idea how this really works. I have been mining since around 1 pm (almost 6 hours). I have a NVIDIA card (4 gig) gtx 680 FTW, which shows to be getting between 114-117.6 Mhash, however my account info only shows 80Mhash. I also notice the more shares (currently 420) I have the lower my estimated reward drops.

80MH/s sounds about right for a high end Nvidia, hope you got free electricity or you will be paying a lot for the bit dust you mine. good luck Grin

and welcome to the pool.

Hopefully it won't up my bill much, but if so I guess this will just be an occasional thing.

You should consider at least just starting with a USB block erupter. For $30 you can get 300mh/s and don't need to worry about burning out the GPU. Back in early November a USB erupter was $10, either way it's better than beating on the GPU, assuming the computer has some alternate uses other than mining...

I would say getting an ANT Miner is a better option, they don't cost a great deal more but they have a much better hashing power.

I just bought the blade eruptor, but you feel the ant minter is better?? Can I run one of each at a time?

Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 434. (Read 4382714 times)