[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 754.

nybbler905

full member

Activity: 213

Merit: 100

Quote from: GuiltySpark343 on May 12, 2013, 09:53:18 AM

What I don't understand is why I have a high discarded share ratio. My cards are stable, internet connection is stable, and I get 1.8 GH/s over stratum. After two and a half days, I have:

93274 accepted shares (47.7%)
387 rejected shares
300 stale shares
101469 discarded shares (51.9%)

Anyone have any ideas why the discards are so high?

not a clue, what server you on for Stratum? earlier post was right, if we start posting which server and stop the server hopping within the pool we may find which one is bugged.

Quote from: CumpsD on May 12, 2013, 06:34:34 AM

Doesn't look like there are any more NMC being processed?

still being processed check the link: https://mining.bitcoin.cz/stats/nmc/
at the time of me posting... Current round duration: 1 day, 4:34:54

Quote from: TomKeddie on May 12, 2013, 12:58:23 PM

Quote from: Kruncha on May 12, 2013, 11:07:18 AM

Estimated reward has hit the dirt again...

K.

Me too, all workers running, I could see the estimated rewards struggling to recover after the reset.

18001   2013-05-12 16:34:10   2:41:01   23191072   17134   0.01073682   none   235854   25.41062002    94 confirmations left
18000   2013-05-12 13:53:09   2:05:17   17988057   13340   0.01655230   none   235838   25.26280000    78 confirmations left
17999   2013-05-12 11:47:52   1:42:00   14425095   10472   0.01925067   none   235829   25.39689175    69 confirmations left

To make these posts useful, please post which stratum server you're using. I was on stratum2, am moving to stratum3.

Cheers,
Tom

I set the GPU to also use the mining proxy so as to know WHICH stratum it was sending shares. Stratum3 seems to ' gobble ' sharres as after 30 min, the 1 share last submitted still hasn't shown and after yesterday, that makes a whole lot of shares ( overnight mining ) that didn't show in short/long blocks

Last block to show was the following
18000 2013-05-12 13:53:09 2:05:17 17988057 8 0.00000016 none 235838
the one before that was number 17996 ( block 235806 ) so... between 17996 getting almost nada for 2 shares and the 8 showing there was a whole lot of ' MIA ' shares. There is still no way we see IF we are submitting for NMC so for now i'm switching to Stratum ( no number ) until either there is some namecoin confermations or that one also disapears 10 shares.

Please post which stratum you are using when you post. Thank you.

nybbler905

full member

Activity: 213

Merit: 100

Quote from: MyOldGeForce on May 12, 2013, 04:31:54 AM

Quote from: Lucko on May 11, 2013, 03:45:57 PM

Quote from: rsbriggs on May 11, 2013, 03:15:48 PM

Cool. Great thing for guiminer users, then. Never tried mixed hardware using it. I do know it is an issue with others - like cgminer or bfgminer. I pretty much use cgminer exclusively these days.

No problem with CG... You can even use best SDK and driver combination for every card...

Quote from: Gibson on May 11, 2013, 04:02:25 PM

Quote from: MyOldGeForce on May 11, 2013, 02:34:43 PM

Thanks for all the answers

I know my forum name is confusing. I began with an old GeForce card, but I have a friend who works with computers, and I have borrowed other cards from him. Currently, I am running one AMD Radeon HD 6700 series.

The driver is version 12.104.0.0, from the 13-4 installer. I have been switching drivers back and forth because I have been trying to mine on that card simultaneously with a 4850. No matter what I do, I couldn't get that to work, GUIMiner didn't start, it only got a tray icon that soon disappeared. With some drivers other programs crashed. As I said, I have spent at least six hours and twenty reboots on (not) getting it to work. I think I got all other drivers out before installing the one I just mentioned.

I think the problem lies in the drivers, if you search AMD.com, you will find that a 4000 series card don't use the same drivers as 6000 series card.
Mixing 5000, 6000, 7000 cards is ok because they use the same drivers.

I have tried to install different drivers for the cards, and I have tried installing a previous version that supports both cards. Neither worked. It seems to be the combination of the new card and anything but the new driver that makes GUIMiner not start.

Now, when I am running only the new card, Phoenix and Stratum Proxy, it stopped working tonight, a few hours after I started it. I restarted the miner this morning and it worked again. I hope it's a one time occurance, but I doubt it. It didn't happen with Phoenix and BCPool. Any guesses?

My estimsted rewards seem to be about right. I'm not exactly sure what they should be, but they are not in the 7 satoshi order of magnitude... Currently it's 0.00051612 and I've been running 200 MHash/s for 1.5 hours.

Ok, i think we all overlooked the obvious and forgot Visual C on the system. I've re-installed XP on an old Duron system to go over what is the bare min Windows software for doing mining and took a while to get it to do CPU mining once i realised GIUMiner and a few other files were needed. On the Thumb Drive directory there are vcredist_x86.exe ( Microsoft Visual C++ 2008 Redistributable Setup ) - XP Service Pack 3 update and the GIUMiner and CPU miner zip files. Just those 4 in one directory waiting to get unpacked and start mining. With out the Microsoft Visual C++ 2008 Redistributable Setup no go on GUIMiner.
I highly recomend every miner get a reputable 2G+ thumb drive for those ( or Linux equivalent ) and back up your wallets on a weekly basis too ( AFTER encrypting as pre-encripted backups cause issues ).

LINK: http://www.microsoft.com/en-us/download/details.aspx?id=29

rsbriggs

full member

Activity: 427

Merit: 100

Quote from: GuiltySpark343 on May 12, 2013, 01:29:32 PM

Quote from: Turok on May 12, 2013, 10:45:52 AM

thanks. I am also getting the connection error

You can fix this yourself. The Gadget points to an old, defunct link. First close down the gadget if it is running.

(1) Go to:
C:\Users\YOURLOGIN\AppData\Local\Microsoft\Windows Sidebar\Gadgets\MinerStats.gadget\js

(2) Edit main.js with a text editor.

(3) Find the line that begins with: var SlushPoolAPI ... and edit it to read: var SlushPoolAPI = 'https://mining.bitcoin.cz/accounts/profile/json/';

(4) Restart gadget. Enter your Slush API token. Should now work! Tips appreciated, BTC address below! Grin

Thanks! That edit works to fix connection problem. But code needs work, slush items like estimated reward don't work as is.

im_riley

newbie

Activity: 18

Merit: 0

Quote from: Miracek on May 12, 2013, 02:14:47 PM

18001 2013-05-12 16:34:10 2:41:01 23191005 none none 235854 25.41062002 84 confirmations left, but i'm sure it will get resolved

mine did that too, but it's been resolved, it's now showing an earned amount that seems to be correct.

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

It all got resolved, but my nerves can't take this uncertainty. I'm off to Bitminter for a while until we hear from Slush about WTF is going on with the pool.

Miracek

full member

Activity: 142

Merit: 100

18001 2013-05-12 16:34:10 2:41:01 23191005 none none 235854 25.41062002 84 confirmations left, but i'm sure it will get resolved

oroboras

full member

Activity: 238

Merit: 100

My reward just tripled, I guess it is fixing its self just fine. *phew*

KNK

hero member

Activity: 692

Merit: 502

Just ans observation - recalculation triggered again on exactly 84 confirmations.

18001 2013-05-12 16:34:10 2:41:01 23191005 none none none 235854 25.41062002 84 confirmations left

in few seconds those none will became valid numbers

EDIT:
and here there are with reward corrected from 0.00019...
18001 2013-05-12 16:34:10 2:41:01 23191005 332 0.00035650 none 235854 25.41062002 84 confirmations left

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

*sigh*

18001 2013-05-12 16:34:10 2:41:01 23191005 none none none 235854 25.41062002

KNK

hero member

Activity: 692

Merit: 502

Quite possible. We are at about 2500 shares per second and if all (or most) of them are at Diff 1 it is a huge load to the database, hence the delay in processing. That's why there is 'Suggested difficulty' for the workers, but it will probably be better to set it for the combined hashrate from all workers if you have many.
Also at some point (when more ASICs come online) it will be required to set the minimum diff higher than 1 for all, in order to keep the database functional.

TObject

member

Activity: 91

Merit: 10

Quote from: dogie on May 12, 2013, 01:21:33 PM

Found my first block yesterday, enjoy my coins Cheesy

Thank you.

What happens when all combined workers start submitting more shares than the pool can handle? Could we be dabbing toes in those waters now, with the cluster performance bridging the 10 TH/s mark?

GuiltySpark343

member

Activity: 98

Merit: 10

Quote from: Turok on May 12, 2013, 10:45:52 AM

thanks. I am also getting the connection error

You can fix this yourself. The Gadget points to an old, defunct link. First close down the gadget if it is running.

(1) Go to:
C:\Users\YOURLOGIN\AppData\Local\Microsoft\Windows Sidebar\Gadgets\MinerStats.gadget\js

(2) Edit main.js with a text editor.

(3) Find the line that begins with: var SlushPoolAPI ... and edit it to read: var SlushPoolAPI = 'https://mining.bitcoin.cz/accounts/profile/json/';

(4) Restart gadget. Enter your Slush API token. Should now work! Tips appreciated, BTC address below! Grin

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: dogie on May 12, 2013, 01:21:33 PM

Also, my namecoin is staying as 0. I entered a wallet address but nothing is happening.

Namecoin rewards are very infrequent here. expect days apart.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Found my first block yesterday, enjoy my coins Cheesy

Also, my namecoin is staying as 0. I entered a wallet address but nothing is happening.

autonomous42

newbie

Activity: 56

Merit: 0

I was almost on the winning side, but then the round dragged on and it evened out. I'm not sure it has to do with bad or wrong submissions. I think the math may be funny. I only use stratum (no number).

crashoveride54902

hero member

Activity: 784

Merit: 504

Dream become broken often

Quote from: TomKeddie on May 12, 2013, 12:58:23 PM

Quote from: Kruncha on May 12, 2013, 11:07:18 AM

Estimated reward has hit the dirt again...

K.

Me too, all workers running, I could see the estimated rewards struggling to recover after the reset.

18001   2013-05-12 16:34:10   2:41:01   23191072   17134   0.01073682   none   235854   25.41062002    94 confirmations left
18000   2013-05-12 13:53:09   2:05:17   17988057   13340   0.01655230   none   235838   25.26280000    78 confirmations left
17999   2013-05-12 11:47:52   1:42:00   14425095   10472   0.01925067   none   235829   25.39689175    69 confirmations left

To make these posts useful, please post which stratum server you're using. I was on stratum2, am moving to stratum3.

Cheers,
Tom

ya i noticed the same decline in reward...i recently changed cgminer to use all 3 stratum addy's and that still didn't help...grr so frusterating knowing someone on pool is getting our work Sad

wouldn't be so bad if i was on the winning side of this bug once...but only been on the losing side

CumpsD

sr. member

Activity: 476

Merit: 250

Quote from: GuiltySpark343 on May 12, 2013, 09:53:18 AM

What I don't understand is why I have a high discarded share ratio. My cards are stable, internet connection is stable, and I get 1.8 GH/s over stratum. After two and a half days, I have:

93274 accepted shares (47.7%)
387 rejected shares
300 stale shares
101469 discarded shares (51.9%)

Anyone have any ideas why the discards are so high?

I'd love to know the same!

TomKeddie

full member

Activity: 176

Merit: 100

Quote from: Kruncha on May 12, 2013, 11:07:18 AM

Estimated reward has hit the dirt again...

K.

Me too, all workers running, I could see the estimated rewards struggling to recover after the reset.

18001   2013-05-12 16:34:10   2:41:01   23191072   17134   0.01073682   none   235854   25.41062002    94 confirmations left
18000   2013-05-12 13:53:09   2:05:17   17988057   13340   0.01655230   none   235838   25.26280000    78 confirmations left
17999   2013-05-12 11:47:52   1:42:00   14425095   10472   0.01925067   none   235829   25.39689175    69 confirmations left

To make these posts useful, please post which stratum server you're using. I was on stratum2, am moving to stratum3.

Cheers,
Tom

stephengillon

newbie

Activity: 56

Merit: 0

has anyone even bothered to send him a pm or email.

im sure youll be more likly to get results

Mowcore

hero member

Activity: 592

Merit: 500

18001 2013-05-12 16:34:10 2:41:01 23191072 1756 0.00098356 none 235854
18000 2013-05-12 13:53:09 2:05:17 17988057 1360 0.00218957 none 235838

hopefully it will fix it's self.

Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 754. (Read 4382801 times)