Pages:
Author

Topic: 570 hashrate - page 2. (Read 427 times)

copper member
Activity: 112
Merit: 8
March 10, 2018, 03:35:18 PM
#16
I had the same issue with one card. I have a rig with 6 rx570's and all of them were doing around 29 mh/s except for one card the was doing ~20-21mh/s.  All of them had the same core, memory and volt settings. So what I did is change settings for that card only.

I changed the core from 1120 to 1150, memory from 2050 to 2010, and volt from 900 to 970. Now that card is doing around 28-29 mh/s like the others. The only difference is that card is running a little hotter than the others because of clock and volt settings. Hope this helps.
hero member
Activity: 756
Merit: 507
March 10, 2018, 03:12:32 PM
#15
well have your flashed modded bios to your cards?
my rx570 from asus with modded bios and with these clocks 1165 core / 1950 memory can make around 900h/s in cryptonight
which is almost 2 times less then vega can push
while mining eth with these setting the card is giving 29 mh/s, so your number a little low. so maybe you have to flash the modded bios?
newbie
Activity: 84
Merit: 0
March 10, 2018, 01:32:53 PM
#14
.....
newbie
Activity: 84
Merit: 0
March 09, 2018, 02:20:21 PM
#13
Sometimes when you close one miner and open another the overclock on a card will get reset. Are sure they are both set the same?

Have you tried a different miner like xmrig or xmr-stak?


im sure about the overclock coz i tried to change i was hopping to get higher than 450h\s

i didnt tried xmrig or xmr-stak


but i tried GGS for cryptonight


my problem is why when mining ethash both cards give 27m\s and when i change to cryptonigt one of them goes realy low 450h\s for rx570 is shit i guess... Sad
member
Activity: 247
Merit: 59
March 09, 2018, 02:10:03 PM
#12
Sometimes when you close one miner and open another the overclock on a card will get reset. Are sure they are both set the same?

Have you tried a different miner like xmrig or xmr-stak?
newbie
Activity: 84
Merit: 0
March 09, 2018, 02:04:42 PM
#11
It's hard to follow exactly what you are saying, so forgive me if you already answered this.

What mining software are you using for cryptonight?

im using claymore for cryptonight i tried GGS same thing 1 card 750 and the other one 450

but mining ethath they both do 27m\h


driver adrenaline

1250\1950

PSU cx 750wat

windows 10
member
Activity: 247
Merit: 59
March 09, 2018, 02:01:25 PM
#10
It's hard to follow exactly what you are saying, so forgive me if you already answered this.

What mining software are you using for cryptonight?
newbie
Activity: 84
Merit: 0
March 09, 2018, 01:52:35 PM
#9
no soluation anyone Huh plz Sad
newbie
Activity: 84
Merit: 0
March 09, 2018, 01:42:19 AM
#8
I'm hitting 29.8 mh/s mining crypto stable with 6 Sapphire RX570s.

I'm able to hit 32 but it crashes about every 30 minutes, so I dropped it down to a point where I rarely crash.
'


can you share your settings plz


and what's ur power consumption ?
newbie
Activity: 84
Merit: 0
March 09, 2018, 01:27:29 AM
#7
i have 2 rx 570 4gb red devils

when mining ethash i get around 27m\s on both of them

1200-1950

but mining cryptonight

1 of then ash at 750h\s and the other one 450\h\s

i tried to play a little bit the cc and mc but 450 is the best i could get

anyone could tell me what's wrong ??

and can i pull more than this from this card Huh

my power consumption around 125w which's consider as high

my PSU: cx 750 w corsair

thank you in advance

27 mh/s is a bit to the low side for the 570, what driver are you using ?


im using adrenaline driver  andi moded the cards the simple way copying 1500 strapss

can someone help me with this plz!!!
full member
Activity: 294
Merit: 104
March 09, 2018, 01:05:35 AM
#6
I'm hitting 29.8 mh/s mining crypto stable with 6 Sapphire RX570s.

I'm able to hit 32 but it crashes about every 30 minutes, so I dropped it down to a point where I rarely crash.
sr. member
Activity: 588
Merit: 335
Steady State Finance
March 08, 2018, 10:51:18 PM
#5
but mining cryptonight
1 of then ash at 750h\s and the other one 450\h\s
i tried to play a little bit the cc and mc but 450 is the best i could get
anyone could tell me what's wrong ??

Try to give those "lower Hashrate" card a dummy output. In most AMD card, dropping Hashrate is one of a regular issue.
Or may you need to test it first to disable one by one? Try the first card and disable the second card and so on. Just to make sure.
full member
Activity: 266
Merit: 103
March 08, 2018, 08:17:56 PM
#4
i have 2 rx 570 4gb red devils

when mining ethash i get around 27m\s on both of them

1200-1950

but mining cryptonight

1 of then ash at 750h\s and the other one 450\h\s

i tried to play a little bit the cc and mc but 450 is the best i could get

anyone could tell me what's wrong ??

and can i pull more than this from this card Huh

my power consumption around 125w which's consider as high

my PSU: cx 750 w corsair

thank you in advance

27 mh/s is a bit to the low side for the 570, what driver are you using ?

Ehh.... some of my 580's catch around that hash rate, that kinda makes me wonder a bit. I thought that was pretty decent to be honest.
full member
Activity: 244
Merit: 103
March 08, 2018, 04:03:49 PM
#3
i have 2 rx 570 4gb red devils

when mining ethash i get around 27m\s on both of them

1200-1950

but mining cryptonight

1 of then ash at 750h\s and the other one 450\h\s

i tried to play a little bit the cc and mc but 450 is the best i could get

anyone could tell me what's wrong ??

and can i pull more than this from this card Huh

my power consumption around 125w which's consider as high

my PSU: cx 750 w corsair

thank you in advance

27 mh/s is a bit to the low side for the 570, what driver are you using ?
full member
Activity: 279
Merit: 104
March 08, 2018, 03:09:20 PM
#2
I have a lot of Sapphire RX 570s  all 4Gb, Hynix and Elpida.
They all do 29.5MH/s no problem.
I am mining Expanse or Musicoin, though.
Minining Ethereum the hashrate drops to ~28MH because of the larger DAG file.
My rigs are Win 7 or Win 10.  
No overclock.  Core/mem at 1100/2000.   BIOS modded to tighten mem timings and lower core voltage.
Using WattTool 0.92 to control freqs and fans.

EDIT: I have a rig with 4 of these cards. The PSU is AX760.   Rig is drawing 465 Watts dual mining Exp/Xvg
Mining Monero the watts drop to 395 for the whole rig.   Monero hasrate on this rig:  3250 H/s  
newbie
Activity: 84
Merit: 0
March 08, 2018, 02:37:46 PM
#1
i have 2 rx 570 4gb red devils

when mining ethash i get around 27m\s on both of them

1200-1950

but mining cryptonight

1 of then ash at 750h\s and the other one 450\h\s

i tried to play a little bit the cc and mc but 450 is the best i could get

anyone could tell me what's wrong ??

and can i pull more than this from this card Huh

my power consumption around 125w which's consider as high

my PSU: cx 750 w corsair

thank you in advance

so my problem got fixed my problem was that you ahve to change the setting to compute mode for all the cards i thought changing one makes the rest also compute mode

any way got it fix sorry for my bad english Cheesy

and thhx for the people who tried to help Smiley
Pages:
Jump to: