5830's, what mh/s are you getting? - page 2.

joker

jr. member

Activity: 38

Merit: 10

Quote from: joker on July 08, 2011, 10:49:19 PM

I have 3 Sapphires running 975core/600mem/stock voltage and they all crank out 292-295mhash/s. For some reason when I drop the memory clock lower than 600 the card locks up. I'm using MSI AB.

I did some more tuning with MSI AB on each card individually instead of the "synchronize like gpus" setting. I found that I only have 1 card that won't go below 450 memory without crashing. The other 2 will easily go down to 300. The core clock on the 3 has been adjusted to 1000mhz. Actually output now is 309.6mhash/s using VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 WORKSIZE=256 -k phatk inside of GUIMiner.

geek-trader

sr. member

Activity: 294

Merit: 250

Am I the only one with a Diamond card?

975 / 200 getting 309 MH/s on Linux - single card.

I didn't have to download anything or do anything special to overclock, just aticonfig --odsc 975,200 and it worked. Runs about 73C with fan speed at 55%

http://www.diamondmm.com/5830PE51G.php

indio007

full member

Activity: 224

Merit: 100

2 5830 Sapphire extreme. Phoenix Miner+PhatK W=256 F=60 BFI_INT Fast-Loop=False Aggression 8 MSI Afterburner
318 Mem (seems optimal after testing) 1010 MHZ 1.250Volts

328MH-330MH

Have a box fan lying on the case while it's flat with the side off.
68C max

joker

jr. member

Activity: 38

Merit: 10

I have 3 Sapphires running 975core/600mem/stock voltage and they all crank out 292-295mhash/s. For some reason when I drop the memory clock lower than 600 the card locks up. I'm using MSI AB.

lowlevel

full member

Activity: 159

Merit: 100

Roughly 305 Mhash/sec on Sapphire Radeon HD 5830's
960/320 clk/mem, stock voltage using Sapphire TRIXX
Cards run between 58 and 62 degrees Celsius, phoenix 1.5 + 3% tweak.

FreeJAC

member

Activity: 112

Merit: 10

save on heat and wattage.

1 Sapphire 5830 here OC 1010 Mem 300 Voltage up to 1200 used Trixx. Getting 316. I've seen it pop to 322.

pandemic

sr. member

Activity: 434

Merit: 250

Quote from: sethmo on July 08, 2011, 10:14:19 AM

All 4 of my Sapphire 5830s do 307-310mhash in Ubuntu

Flashed with RBE:
Core: 1000
Mem: 344
Voltage: Stock
Fans: 85-100%
Temp:58-72C(depending on when my AC runs)

I went XFX just for their lifetime warranty. I figured as a miner, that'd be good to have. 20mh/s less is alright by me, I suppose.

sethmo

newbie

Activity: 24

Merit: 0

All 4 of my Sapphire 5830s do 307-310mhash in Ubuntu

Flashed with RBE:
Core: 1000
Mem: 344
Voltage: Stock
Fans: 85-100%
Temp:58-72C(depending on when my AC runs)

pandemic

sr. member

Activity: 434

Merit: 250

Quote from: mike678 on July 08, 2011, 08:51:07 AM

Quote from: pandemic on July 08, 2011, 08:45:44 AM

Quote from: Mousepotato on July 07, 2011, 10:46:18 PM

318MH/s OC'd at 1020/355MHz. Aggression=12 Worksize=256 phatk and some other settings that I can't remember.

I can push it to 1050/355MHz and hit a solid 325-327MH/s but it sometimes locks after a few hours, which to me isn't worth the 7-9 extra MH/s.

How'd you get it that high? At 960mhz mine starts to run into issues. Voltage?

What brand are you using? I use sapphire and have no problems getting it to 1000/300 with no voltage changes. I haven't tried higher because I'm waiting on my 5200 rpm fan XD

I've got XFX. I heard that sapphire was easier to overclock but I just don't understand why.

mike678

full member

Activity: 182

Merit: 100

Quote from: pandemic on July 08, 2011, 08:45:44 AM

Quote from: Mousepotato on July 07, 2011, 10:46:18 PM

318MH/s OC'd at 1020/355MHz. Aggression=12 Worksize=256 phatk and some other settings that I can't remember.

I can push it to 1050/355MHz and hit a solid 325-327MH/s but it sometimes locks after a few hours, which to me isn't worth the 7-9 extra MH/s.

How'd you get it that high? At 960mhz mine starts to run into issues. Voltage?

What brand are you using? I use sapphire and have no problems getting it to 1000/300 with no voltage changes. I haven't tried higher because I'm waiting on my 5200 rpm fan XD

pandemic

sr. member

Activity: 434

Merit: 250

Quote from: Mousepotato on July 07, 2011, 10:46:18 PM

318MH/s OC'd at 1020/355MHz. Aggression=12 Worksize=256 phatk and some other settings that I can't remember.

I can push it to 1050/355MHz and hit a solid 325-327MH/s but it sometimes locks after a few hours, which to me isn't worth the 7-9 extra MH/s.

How'd you get it that high? At 960mhz mine starts to run into issues. Voltage?

xtoro

newbie

Activity: 56

Merit: 0

Quote from: pandemic on July 07, 2011, 11:55:03 AM

how are you guys getting past 900mhz overclock? My CCC only goes to 900. I heard something about using a tool from MSI to get into the 950 range but also heard that it only helps a tiny bit.

Also, these XFX cards of mine have lifetime warranty. What can I/can I not do to OC to the max but still keep that warranty. I know I can't flash the card BIOS, for example.

Download Trixx

Mousepotato

hero member

Activity: 896

Merit: 1000

Seal Cub Clubbing Club

318MH/s OC'd at 1020/355MHz. Aggression=12 Worksize=256 phatk and some other settings that I can't remember.

I can push it to 1050/355MHz and hit a solid 325-327MH/s but it sometimes locks after a few hours, which to me isn't worth the 7-9 extra MH/s.

pandemic

sr. member

Activity: 434

Merit: 250

Quote from: CanaryInTheMine on July 07, 2011, 12:00:13 PM

Quote from: pandemic on July 07, 2011, 11:55:03 AM

how are you guys getting past 900mhz overclock? My CCC only goes to 900. I heard something about using a tool from MSI to get into the 950 range but also heard that it only helps a tiny bit.

Also, these XFX cards of mine have lifetime warranty. What can I/can I not do to OC to the max but still keep that warranty. I know I can't flash the card BIOS, for example.

How are you a full member and not familiar with MSI Afterburner?

There are plenty of posts, including an official MSI Afterburner guide, in these forums. Easy to find.

I actually found a way to OC past 900 in AOCLBF. I'm currently getting 296-299MH/S at 965mhz.

edit:down to 950mhz because I'm having some stability issues.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: pandemic on July 07, 2011, 11:55:03 AM

how are you guys getting past 900mhz overclock? My CCC only goes to 900. I heard something about using a tool from MSI to get into the 950 range but also heard that it only helps a tiny bit.

Also, these XFX cards of mine have lifetime warranty. What can I/can I not do to OC to the max but still keep that warranty. I know I can't flash the card BIOS, for example.

How are you a full member and not familiar with MSI Afterburner?

There are plenty of posts, including an official MSI Afterburner guide, in these forums. Easy to find.

pandemic

sr. member

Activity: 434

Merit: 250

how are you guys getting past 900mhz overclock? My CCC only goes to 900. I heard something about using a tool from MSI to get into the 950 range but also heard that it only helps a tiny bit.

Also, these XFX cards of mine have lifetime warranty. What can I/can I not do to OC to the max but still keep that warranty. I know I can't flash the card BIOS, for example.

CydeWeys

full member

Activity: 154

Merit: 100

4x5830, each at 975/335, using latest Phoenix and phatk kernel, getting about 311 MHash/s per card. I tried pushing up to 985/335, but something crashed overnight and I lost some hours of mining (and had to reboot in the morning). The system has been running stable at 975/335 for days though, so that seems achievable with my setup. Temps on the hottest card are around 66-68 degC (yay open case with a box fan).

jdflynn55

newbie

Activity: 6

Merit: 0

guiminer Phoenix on a Sapphire 5830 @ 965/1000 getting ~299 Mhash/s. -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOP=false

xtoro

newbie

Activity: 56

Merit: 0

595Mh/s with 2 cards crossfired

GPU@965Mhz
Mem@320Mhz

Temps between 67-71*C

One card is Sapphire 5830 Xtreme
Other card is ASUS EAH5830 DirectCU <-- This one overclocks MUCH higher and stays much cooler

Flags used : -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=7

Rejection of about 1-1.2%

pandemic

sr. member

Activity: 434

Merit: 250

what's everyone's rejection rate?

Topic: 5830's, what mh/s are you getting? - page 2. (Read 7652 times)