Topic: 6 card rx 580 rig only shows 4 cards. any idea's (Read 279 times)
using the same blockchain drivers and 2 hours after my post and the system restarted. wow. This is going to suck if I have to go card by card to find the problem here.
My NVidia system is doing the same shit now. I have a gtx 1080 system and when it has 4 cards runs solid. I can't overclock it and never shuts off. when I add the 5th card and set everything to base settings I start the miner go to benchmark it and hard lock. I have to shut it down and start over. Computer runs fine until I start a miner any miner. any idea's
NVidia system specs
gtx 1080 5 cards
msi sli plus
intel g4560
8 gigs ada ddr4 2666
windows 10 pro
two 750w seasonic play psu's 3 cards on one psu, 2 cards plus motherboard and ssd on other
NVidia system specs
gtx 1080 5 cards
msi sli plus
intel g4560
8 gigs ada ddr4 2666
windows 10 pro
two 750w seasonic play psu's 3 cards on one psu, 2 cards plus motherboard and ssd on other
Yep has the latest bios. Bios update is the first thing I do before os install. With the 4 cards in the system and all it does is load the mpm benchmark and hard locks the system. I wonder if my cpu is bad. When i first put this one together i had corsair hx1000i that broke 45 seconds on. After that i sent it in for warranty and installed a seasonic 850w. This is also the second motherboard. i haven't changed out the cpu or memory yet. I have not overclocked this cpu at all.
once I install windows again the blockchain is what I'm going to use. I was using the brand new drivers that came out.
Damn the rx 580 price is crazy high now. I was going to order two more tonight but there 450 a card right now.
Damn the rx 580 price is crazy high now. I was going to order two more tonight but there 450 a card right now.
I don't think you really need to wipe your hdd and re-install the OS. Use DDU in safe mode and remove the current drivers. And then try the Aug-23 block chain drivers. You did make sure that Z270 has the latest bios, correct?
all cards and risers work one by one.
windows 10 pro
seasonic focus plus plat 850watt on 3 cards and motherboard
evga 850g2 on 3 cards and fans
ssd 128 xpg
8giga xpg memory 266
intel 4600
msi z270 gaming m3
bios set to gen 2 pcie
4g mining on
96 block cycle
2 asus rx 580 top strix model
4 xfx gts rx 580
tried reinstalling windows and all drivers today, no change, tried 1 card at a time and always stops at 4 and somethings it takes a couple restarts for it to see the 4th one. Device manager is only showing 4 not talking about drivers at this point.
seasonic focus plus plat 850watt on 3 cards and motherboard
evga 850g2 on 3 cards and fans
ssd 128 xpg
8giga xpg memory 266
intel 4600
msi z270 gaming m3
bios set to gen 2 pcie
4g mining on
96 block cycle
2 asus rx 580 top strix model
4 xfx gts rx 580
tried reinstalling windows and all drivers today, no change, tried 1 card at a time and always stops at 4 and somethings it takes a couple restarts for it to see the 4th one. Device manager is only showing 4 not talking about drivers at this point.
set the pci e to get 1
once I install windows again the blockchain is what I'm going to use. I was using the brand new drivers that came out.
Damn the rx 580 price is crazy high now. I was going to order two more tonight but there 450 a card right now.
Damn the rx 580 price is crazy high now. I was going to order two more tonight but there 450 a card right now.
I give up. I'm just going to run two 4 card rx 580's and that will be he only amd miners I have. Nvidia drivers and cards just work. Even in the new amd adrenalin drivers I have no clue if the compute mode really works or not. U put card one in compute but the other cards will not switch over to compute mode in there settings. They just switch back to graphics.
I'm using the AUG-23 blockchain drivers all my AMD rig. Is that what you're using?
I give up. I'm just going to run two 4 card rx 580's and that will be he only amd miners I have. Nvidia drivers and cards just work. Even in the new amd adrenalin drivers I have no clue if the compute mode really works or not. U put card one in compute but the other cards will not switch over to compute mode in there settings. They just switch back to graphics.
So you've swapped cards and risers in and out and made sure all of the cards and all of the risers are functional on their own, correct? I had a similiar issue with one rig that didn't have up to date bios. I also had one card missing in device manager the other night on a Nvidia rig build and finally figured out the usb cable to the riser was not seated properly.
If they all function one by one, make sure all of your pcie mb slots are functioning as well. Check your motherboard bios first though, if you haven't already. It needs to be up to date.
If they all function one by one, make sure all of your pcie mb slots are functioning as well. Check your motherboard bios first though, if you haven't already. It needs to be up to date.
Yes, you should get video out of the card that's in the #1 pcie slot whether you are using a riser or not. I think you can force igpu in the bios with that board though, so you can just use that while you're configuring the rig. I have two rigs running with that board and one won't boot without the dummy hdmi in the card plugged into #1 pcie slot, but I found a setting in the bios to force igpu on the second one. I just haven't had time to shut the other one down and try that same setting in the bios on my first rig.
So you've swapped cards and risers in and out and made sure all of the cards and all of the risers are functional on their own, correct? I had a similiar issue with one rig that didn't have up to date bios. I also had one card missing in device manager the other night on a Nvidia rig build and finally figured out the usb cable to the riser was not seated properly.
If they all function one by one, make sure all of your pcie mb slots are functioning as well. Check your motherboard bios first though, if you haven't already. It needs to be up to date.
If they all function one by one, make sure all of your pcie mb slots are functioning as well. Check your motherboard bios first though, if you haven't already. It needs to be up to date.
I have tried gen 1 and 4g on no change. I'm going to shut down all usb's and extra items on the board and see if that changes anything. If not I have done everything posted here today with no change. Also can u get video out when u use risers for mining from the gpus or only on the intel chip?
Yes 16000 and 32000. I have remove the asus cards and just was going to do 4 cards. So I setup it up from 1-4 slots. loaded windows only showed 2 cards. Moved the cards rom 2 and 3 down to 5 and 6 and now showing 4 cards again. for some reason slots 2 and 3 do not like cards installed there. that's the problem I'm not sure what the fix is. Maybe the gaming m3 can't load cards in those slots. the m5 loves 6 cards been running 30 days no problem. same with the sli plus model.
Change all PCIe slots to Gen 1
Enable Above 4G Decoding in the BIOS
try to play with gen1 /2 for pcie ports in your motherboard bios 
Yes 16000 and 32000. I have remove the asus cards and just was going to do 4 cards. So I setup it up from 1-4 slots. loaded windows only showed 2 cards. Moved the cards rom 2 and 3 down to 5 and 6 and now showing 4 cards again. for some reason slots 2 and 3 do not like cards installed there. that's the problem I'm not sure what the fix is. Maybe the gaming m3 can't load cards in those slots. the m5 loves 6 cards been running 30 days no problem. same with the sli plus model.
virtual memory is set to min 1600 max 3200
Min 16GB and max 32GB right ? 
virtual memory is set to min 1600 max 3200
Did you mean 16000 and 32000?
virtual memory is set to min 1600 max 3200
Increase your virtual memory on win10
Jump to: