Would also like to see the watt usage of your cards.
Would be interesting if they would still run stable at 1.084
Topic: 820KHs per 280x - Config + SS - page 4. (Read 15373 times)
Quote
watt usage per card pls?
+1
watt usage per card pls?
4 min is long enough to stabilize. My rigs take 10-20 or so seconds. If your hashrates are going down after 4 minutes it's because your cards are throttling.
will try that today... got a 280x dc2
Thank You! ill probably experiment with it.
Can you please show us the hashrate after it has stabilized (not after 4 min)?
Can you please show us the hashrate after it has stabilized (not after 4 min)?
Gazza1, true that.
I'm guessing the OP got some nice Hynix cards or something
I'm guessing the OP got some nice Hynix cards or something
Samsung on the IC, did i get lucky?
Anywhoo, Smartcoin is still going so no power figures yet.
Gazza1, true that.
I'm guessing the OP got some nice Hynix cards or something
I'm guessing the OP got some nice Hynix cards or something
picked up a X77 bios and flashed. It seems that anything above 1090gpu and my hash rate goes down significantly
For scrypt coins it's usually magic numbers. 1080-1500 for ex can be fast then one number in either direction is significant drop.
think its random luck go above that
people say they run card 1.25v, that may not be wise for long term
people say they run card 1.25v, that may not be wise for long term
Any idea on the power pull of each of those cards?
Great setup!
Great setup!
I am about to throw the killerwatt on it after this smartcoin launch, so i'll be updating this thread with those power numbers then.
picked up a X77 bios and flashed. It seems that anything above 1090gpu and my hash rate goes down significantly
i got 758hash with cgminer sapphire dualx
tried sg+bin, hashrate down to 710
tried sg+bin, hashrate down to 710
Any idea on the power pull of each of those cards?
Great setup!
Great setup!
win7 x64, 13-12 drivers. I didn't think of checking the bios. My cards are Elpida. Yours?
Let me get back at ya
Let me get back at ya
nice hash rates /envy. I have two of those cards, however they seem to start to lose hash at 1070/1500 (753kh)
I'm also using sgminer + 8192.bin
I'm also using sgminer + 8192.bin
Which OS / driver + SDK combo? Same bios rev as my cards?
nice hash rates /envy. I have two of those cards, however they seem to start to lose hash at 1090/1500 (753kh)
I'm also using sgminer + 8192.bin
I'm also using sgminer + 8192.bin
Thanks!
Jump to: