Topic: 8th Alt coin thread. Or what to do now that asics are all over the place. - page 90. (Read 81426 times)
May 31, 2018, 12:50:48 AM
not to derail
sorry guys on the private pool ,
we had issues today and i had to bring the box down to patch for the raven wallets hack via yiimp open RPC hole that lead to tons of pools losing coins
https://github.com/tpruvot/yiimp/commits/next
the server is all patched and a new IP as well, cloudflare is messed up and isp keeps assigning new IPs , I will get a new static sometime tomorrow
all your shares are safe so those who mined will still get credit on the block.
if you dont get a payout pm or hit me in discord and ill send you your share.
May 30, 2018, 09:14:48 PM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
That would appear to be the case:
https://bitcointalksearch.org/topic/m.28389610
You can still use the firmware
Links have been taken down
There was still links throughout the thread last time I looked. Might be gone now though. Some people might still have it though
May 30, 2018, 08:57:35 PM
Side note
Did anyone order the trezor t ??
Did anyone order the trezor t ??
yes my t arrived yesterday. setting it up tomorrow (31 may).
already have two trezor ones.
Let me know if you like it
May 30, 2018, 08:28:35 PM
Side note
Did anyone order the trezor t ??
Did anyone order the trezor t ??
yes my t arrived yesterday. setting it up tomorrow (31 may).
already have two trezor ones.
May 30, 2018, 07:28:05 PM
I noticed that Nicehash listed the CN Heavy algo.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
380 2Gb - 276 h/s on cn-heavy, kinda shit
. rx 470 with samsung mem goes over 900, rx 570 hynix ~ 770hs. May 30, 2018, 06:44:23 PM
Just ran into this article.
https://www.theverge.com/2018/5/30/17408610/asus-crypto-mining-motherboard-gpus
The motherboard supports up to 20 GPU's, only catch is it's all risers. However it eliminates the need for PCIe-to-USB adaptors and the USB cables connect directly to the mobo. The PCIe adapters were a major source of instability anyway. I cannot see 20 GPU's working nicely on Windows, probably only works on a Linux based system. Might still be interesting to see mining pioneers testing this with Windows.
https://www.theverge.com/2018/5/30/17408610/asus-crypto-mining-motherboard-gpus
The motherboard supports up to 20 GPU's, only catch is it's all risers. However it eliminates the need for PCIe-to-USB adaptors and the USB cables connect directly to the mobo. The PCIe adapters were a major source of instability anyway. I cannot see 20 GPU's working nicely on Windows, probably only works on a Linux based system. Might still be interesting to see mining pioneers testing this with Windows.
May 30, 2018, 06:20:30 PM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
That would appear to be the case:
https://bitcointalksearch.org/topic/m.28389610
You can still use the firmware
Links have been taken down
May 30, 2018, 05:42:25 PM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
That would appear to be the case:
https://bitcointalksearch.org/topic/m.28389610
You can still use the firmware
May 30, 2018, 04:01:48 PM
I noticed that Nicehash listed the CN Heavy algo.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
Using 7 x470s, my averages are: 575 hs and ~85 watts per GPU.
Settings on SMOS XMR Stak:
CC: 1100
MC: 1900
PL: 6
Temp Target: 70
Fans: 51%
May 30, 2018, 02:53:41 PM
I noticed that Nicehash listed the CN Heavy algo.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
Been out of the loop for a bit, wondering how it runs on the RX 470? R9 280X?
Currently the CN gets like 600hs with the good old Tahitis and only uses like 120 Watts.
Wondering if the switch is worth it.
May 30, 2018, 12:50:23 PM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
That would appear to be the case:
https://bitcointalksearch.org/topic/m.28389610
Yeah I was bummed when I found it
Side note
Did anyone order the trezor t ??
May 30, 2018, 11:06:40 AM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
That would appear to be the case:
https://bitcointalksearch.org/topic/m.28389610
May 30, 2018, 09:40:33 AM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
Didn’t blissz have to stop that due to legal stuff??
May 30, 2018, 08:48:45 AM
Would anyone be interested in a submerged cooled bitcoin miner?
I have an opportunity to test a prototype which is built on a flat pcb that can be submerged in novec fluid or oil. Not a tube with fans.
This is purppse built for submerged cooling by one of the leaders in bitcoin miners (not shitmain).
I am located in Australia I would like to do a group buy if possible. The unit would be about $1000USD you just build the submerged part. If I have some interest I will list the specs. I would expect it to be at least the equivalent of the top miners available today. Just waiting on the specs from the manufacturer.
I have an opportunity to test a prototype which is built on a flat pcb that can be submerged in novec fluid or oil. Not a tube with fans.
This is purppse built for submerged cooling by one of the leaders in bitcoin miners (not shitmain).
I am located in Australia I would like to do a group buy if possible. The unit would be about $1000USD you just build the submerged part. If I have some interest I will list the specs. I would expect it to be at least the equivalent of the top miners available today. Just waiting on the specs from the manufacturer.
May 30, 2018, 07:39:54 AM
anyone have any D3 mods or recommended settings for them?
Blissz firmware update is good. Lower power and lower temps.
May 30, 2018, 07:27:49 AM
anyone have any D3 mods or recommended settings for them?
May 30, 2018, 06:26:34 AM
I'm getting ready to ditch long-term xevan mining and go full-ham on CN7.... with all nvidia I have left. I think XMR still has yet to 'moon'. If it keeps up with fighting asics; its value should go up pretty high compared to history.
This CN7 FPGA that's up for sale....
I can't believe people are that gullible; even if it is a legitimate thing..... gullible. I mean; 83 euros just in shipping.... on top of all other issues I have pointed out in their thread.
Makes me curious....
curious about stupidity.
I think FPGA's are more centralized than asic look at the prices their talking how many small miners can pay $4000-$5000 for one miner plus the algos their talking are going to crush these little coins I think it's a freaking joke ppl with their greed are turning cryptos into a circusThis CN7 FPGA that's up for sale....
I can't believe people are that gullible; even if it is a legitimate thing..... gullible. I mean; 83 euros just in shipping.... on top of all other issues I have pointed out in their thread.
Makes me curious....
curious about stupidity.
Quote from: JaredKaragen
This CN7 FPGA that's up for sale....
I can't believe people are that gullible; even if it is a legitimate thing..... gullible. I mean; 83 euros just in shipping.... on top of all other issues I have pointed out in their thread.
Makes me curious....
curious about stupidity.
You have to admit the product looks extremely tempting and there's a good chance it could actually be legit (I assume you're referring to the Dwarf FPGA). Also, the fact (lure?) of them being sold in a limited quantity is exactly the same tactics the ASIC manufacturers are doing it and you know it yourself: only the first batch really makes you money...I can't believe people are that gullible; even if it is a legitimate thing..... gullible. I mean; 83 euros just in shipping.... on top of all other issues I have pointed out in their thread.
Makes me curious....
curious about stupidity.
If the Paypal+credit card payment combo actually provide the buyer protection they are supposed to, I'm not sure there's much risk involved in taking a punt. I haven't yet, but I'm not ruling it out.
May 30, 2018, 05:56:51 AM
p.s all are welcome to join my private pool, we mine raven 5 days and other x16 coins based on difficulty the remaining two days. 2.2 ghs in the pool so far and we beat estimates off all these scam pools like suprnova , etc
Interesting... PM sent.
ill PM later. now that my compiler seems to be working, im going to dig up the x16r source I downloaded to compile originally... I think it was an x16r. Ill keep you in the loop as I figure out more.
im still out and about dealing with some things tonight. Hopefully I can devote an hour or two.
sounds good, honestly i dont mind paying a flat fee for a miner but when you solo mine it’s detrimental to have
the rig disconect once every 45 mins , when youn might br getting a huge share rate at that point and a chance of getting a block is missed , keep us posted please ill be sharing the pool ip with anyone interested, reason I dont want it public is due to ddos attacks etc .
we found three blocks today
May 30, 2018, 05:50:19 AM
i need a recompiled x16 miner myself, im solo mining some x16 coins but dev fees mining always fucking interupts And has cost me some blocks. Anyone know any non dev fee x16 miners for amd and nvidia?
most of my rigs are on x16 now
p.s all are welcome to join my private pool, we mine raven 5 days and other x16 coins based on difficulty the remaining two days. 2.2 ghs in the pool so far and we beat estimates off all these scam pools like suprnova , etc
they might pay u a bit below your expected a day buy never the bonus blocks , ive doubled my rate of raven mined most days and with 1 min blocks and the large number of blocks those pools smash. im convinced they are stealing
I'll send my x16 miners your way I like mining raven I've been mining on cryptopool.party seemed to pay the best I received the lowest on suprnovamost of my rigs are on x16 now
p.s all are welcome to join my private pool, we mine raven 5 days and other x16 coins based on difficulty the remaining two days. 2.2 ghs in the pool so far and we beat estimates off all these scam pools like suprnova , etc
they might pay u a bit below your expected a day buy never the bonus blocks , ive doubled my rate of raven mined most days and with 1 min blocks and the large number of blocks those pools smash. im convinced they are stealing
May 30, 2018, 03:07:42 AM
If the prog/pow that Ohgodacompany is proposing for ethereum to change to gets some traction GPU's will be the hottest hardware in town again. See link below:
https://medium.com/@OhGodAGirl/the-problem-with-proof-of-work-da9f0512dad9
Share it around as much as possible
https://medium.com/@OhGodAGirl/the-problem-with-proof-of-work-da9f0512dad9
Share it around as much as possible
Jump to: