@FNT pls help my antminer a3 never run? After I install the ./AD3_MOD_FNT 1 b9 everything find but after that I do on the 2nd one ./AD3_MOD_FNT 2 b9 error....then I restart the system, no hash
This is the picture https://drive.google.com/file/d/1Ijoa9t2RUJM9CkrqVZ6XcDSV0Wc4wPMd/view?usp=drivesdk
https://drive.google.com/file/d/14CxWn5JVAwJOl1zTO2XaLDQ1pofnvXK9/view?usp=drivesdk
Error file I have save https://drive.google.com/file/d/1M1lAxT7BcWNFyVMzAIQdZ-PkMB7wDShM/view?usp=drivesdk
Sorry for my bad English, hope you understand.
Any way can I restore back the original one?
Topic: A3/D3 Voltage modification file for Antminer A3 and D3 - free (Read 1889 times)
Hi guys,
Yes, please use the following link for the update
curl -k -o AD3_MOD_FNT.sh https://forexneurotrader.com/AD3_MOD_FNT.sh
This should work!
Bye, FNT
Yes, please use the following link for the update
curl -k -o AD3_MOD_FNT.sh https://forexneurotrader.com/AD3_MOD_FNT.sh
This should work!
Bye, FNT
I have the same problem...
looks like a nice solution... want to try it.
Any update?
looks like a nice solution... want to try it.
Any update?
Is the Script broken?
I am receiving the same error as above
I am receiving the same error as above
OK, thanks for info!
I'm going to check it an upload again, and give you info...
Bye, FNT
I'm going to check it an upload again, and give you info...
Bye, FNT
Something strange with the script, I installed it on my first miner with no issues but on second miner I get the below.
root@antMiner:~# curl -o AD3_MOD_FNT.sh http://forexneurotrader.com/AD3_MOD_FNT.
sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 251 100 251 0 0 2037 0 --:--:-- --:--:-- --:--:-- 3024
root@antMiner:~# chmod a+x AD3_MOD_FNT.sh
root@antMiner:~# ./AD3_MOD_FNT.sh
./AD3_MOD_FNT.sh: line 1: syntax error: unexpected newline
Any ideas?
Or am i missing something.
root@antMiner:~# curl -o AD3_MOD_FNT.sh http://forexneurotrader.com/AD3_MOD_FNT.
sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 251 100 251 0 0 2037 0 --:--:-- --:--:-- --:--:-- 3024
root@antMiner:~# chmod a+x AD3_MOD_FNT.sh
root@antMiner:~# ./AD3_MOD_FNT.sh
./AD3_MOD_FNT.sh: line 1: syntax error: unexpected newline
Any ideas?
Or am i missing something.
i got same error.
Hi!
Do you still get this error? Because I havn't changed anything...
Bye, FNT
Do you still get this error? Because I havn't changed anything...
Bye, FNT
Something strange with the script, I installed it on my first miner with no issues but on second miner I get the below.
root@antMiner:~# curl -o AD3_MOD_FNT.sh http://forexneurotrader.com/AD3_MOD_FNT.
sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 251 100 251 0 0 2037 0 --:--:-- --:--:-- --:--:-- 3024
root@antMiner:~# chmod a+x AD3_MOD_FNT.sh
root@antMiner:~# ./AD3_MOD_FNT.sh
./AD3_MOD_FNT.sh: line 1: syntax error: unexpected newline
Any ideas?
Or am i missing something.
root@antMiner:~# curl -o AD3_MOD_FNT.sh http://forexneurotrader.com/AD3_MOD_FNT.
sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 251 100 251 0 0 2037 0 --:--:-- --:--:-- --:--:-- 3024
root@antMiner:~# chmod a+x AD3_MOD_FNT.sh
root@antMiner:~# ./AD3_MOD_FNT.sh
./AD3_MOD_FNT.sh: line 1: syntax error: unexpected newline
Any ideas?
Or am i missing something.
Yeah, just tried it on 300 and the hashrate is half so no point really.
Power draw on mine at 300 is only 500W
Power draw on mine at 300 is only 500W
That's not bad at all but at what hashrate?
I'm down to 1kw per miner 825MH and about 75c which works quite well.
What voltage have you set yours too?
I'm down to 1kw per miner 825MH and about 75c which works quite well.
What voltage have you set yours too?
what is your result? how much less power do you use now? I drive with 300hz and need 670 W this is ideal because I have solar power brings me 4.6 SC and only 50 degrees heat
Nevermind, managed to figure it out 
Hi All,
I was wondering if some one could assist me with under volting, I've installed the script and all is working fine, I am just unsure of the HEX values.
root@antMiner:/config# ./AD3_MOD_FNT 3 b9
Reading voltage
chain 3: voltage = 0xb8
Setting voltage on chain 3
Voltage OK!
Reading voltage
chain 3: voltage = 0xb9
Success: Voltage updated!
If you save money, check it and maybe then donate something.
root@antMiner:/config# ./AD3_MOD_FNT
Reading all voltages
chain 1: voltage = 0xb9
chain 2: voltage = 0xb9
chain 3: voltage = 0xb9
That's what I've done so far but it's made no difference at all, how do I go further?
Thanks
I was wondering if some one could assist me with under volting, I've installed the script and all is working fine, I am just unsure of the HEX values.
root@antMiner:/config# ./AD3_MOD_FNT 3 b9
Reading voltage
chain 3: voltage = 0xb8
Setting voltage on chain 3
Voltage OK!
Reading voltage
chain 3: voltage = 0xb9
Success: Voltage updated!
If you save money, check it and maybe then donate something.
root@antMiner:/config# ./AD3_MOD_FNT
Reading all voltages
chain 1: voltage = 0xb9
chain 2: voltage = 0xb9
chain 3: voltage = 0xb9
That's what I've done so far but it's made no difference at all, how do I go further?
Thanks
Hi there,
I would like to test it mornings but like to ask - any results for hashrate, errors and power consumption for A3 and D3?
Ill sure test it but asking prior my tests not to try find what is already found...
EDIT: ok, nobody answered
My results with A3 - power draw decrease around 150W with different board settings between fe - fa
My results with D3 - going to find and test some now...
I would like to test it mornings but like to ask - any results for hashrate, errors and power consumption for A3 and D3?
Ill sure test it but asking prior my tests not to try find what is already found...
EDIT: ok, nobody answered
My results with A3 - power draw decrease around 150W with different board settings between fe - fa
My results with D3 - going to find and test some now...
i have 2 A3 run normally , i turn to 1370 at 1480 watt, no use this script.
hello,
i have an question if i may.. i woud like to understand how the hex value works...
http://hextodecimal.com/index.php
i can see hex 00 means in decimal 0 too, the end is FE and has decimal value 254, so it means i can try all 254 values? so 10V is minimum and 12V maximum..chngind hex values means i can cut that 2V (10V-12V) into 254 small pieces between? sorry if it sounds stupid, i dont know how it works, trying to udnderstand and do not want to broke something as i have 2x A3...
B8 has decimal value 184 and it is default from bitmain, so its how much voltage?
and second part of question..i will remain frequency as is only will play with the hex value of voltage to lowest possible without HW errors,right? i assume some chains will be able less V and some not, but thats fine.
so thank you again if you reply
i have an question if i may.. i woud like to understand how the hex value works...
http://hextodecimal.com/index.php
i can see hex 00 means in decimal 0 too, the end is FE and has decimal value 254, so it means i can try all 254 values? so 10V is minimum and 12V maximum..chngind hex values means i can cut that 2V (10V-12V) into 254 small pieces between? sorry if it sounds stupid, i dont know how it works, trying to udnderstand and do not want to broke something as i have 2x A3...
B8 has decimal value 184 and it is default from bitmain, so its how much voltage?
and second part of question..i will remain frequency as is only will play with the hex value of voltage to lowest possible without HW errors,right?
i assume some chains will be able less V and some not, but thats fine.so thank you again if you reply
Will this only work with A3 and D3?
Does setting the voltage too low stave the ASIC?
I had to set this back to the default clock to get it to work, If I over clock again will I break anything?
Does setting the voltage too low stave the ASIC?
I had to set this back to the default clock to get it to work, If I over clock again will I break anything?
I'm curious of the same thing - I have undervalued (0xfe) and overclocked (612) - curious of the effects and energy usage. Sadly I don't have a wattmeter other than what the power company is telling me; which doesn't help when it's summer time and A/C usage is already higher than usual. I am curious however if anyone else has undervolted + overclocked and what their experience was - hashrate/power consumption/stability - etc. My unit has ran significantly cooler on the undervolt setting. It's outside in window well because of the noise. Outside temps reach ~100 F some days. PCB usually peaks at 76 C.
Will this only work with A3 and D3?
Does setting the voltage too low stave the ASIC?
I had to set this back to the default clock to get it to work, If I over clock again will I break anything?
Does setting the voltage too low stave the ASIC?
I had to set this back to the default clock to get it to work, If I over clock again will I break anything?
My A3 is under volted to chain1 0xf8 chain2 0xf8 chain 3 0xc8, freq @ 312mhz for now, fans at 50%, 432gh/s avg, unknown power consumption but it runs stable and is a little bit cooler now.
Could you all please share the settings you are using and the Frequency and Power.
It would be much appreciated.
It would be much appreciated.
Jump to: