A nice range would be keeping your ambient temperature between 15 and 30 C, if you can. I've only been running the units for a few months but I find these are a good range. It allows wiggle room if it warms up a few degrees or also if it cools down. I found my performance dropped off a little when my ambient air got around 5 C, and if it gets over 30 C, my fans are running at 100%, and the outflow reads in the 90's.
I like to see my outflow below 90C because I'm paranoid and like to know I have wiggle room, other things that will affect it is if you have a dusty/buggy environment because this will reduce cooling.
Obviously my numbers are not hard and fast but it's what I'm shooting for for the time being.
Topic: A741 Temperature Allow - page 2. (Read 1888 times)
What is the 39/91 tempature mean is one ambient and one core?
The way the miner stats show it that is the inflow and outflow temperatures of the Miner air. I always assume they are what the temp is on the board at inflow or outflow, but I can't be sure.
hi All, my A741 is running at Temperature 45-50 / 98 - 100, with 100% fan speed and -1 Power. Anyone know what's the maximum allow for this machine?
What's your temperature ?
What's your temperature ?
OP: You will want to do something to either exhaust the hot air your miner is creating or find a way to introduce cooler air to your miner intake. What is your setup like?
I'm pretty sure the specs call for operating in ambient air not warmer than 40 C.
Good luck
So what would you suggest the safe range for input and exhaust temps are for avalon 741
What is the 39/91 tempature mean is one ambient and one core?
The way the miner stats show it that is the inflow and outflow temperatures of the Miner air. I always assume they are what the temp is on the board at inflow or outflow, but I can't be sure.
hi All, my A741 is running at Temperature 45-50 / 98 - 100, with 100% fan speed and -1 Power. Anyone know what's the maximum allow for this machine?
What's your temperature ?
What's your temperature ?
OP: You will want to do something to either exhaust the hot air your miner is creating or find a way to introduce cooler air to your miner intake. What is your setup like?
I'm pretty sure the specs call for operating in ambient air not warmer than 40 C.
Good luck
What is the 39/91 tempature mean is one ambient and one core?
for antminer, im running 70-75 without a problem for 2 year++, as im new to Avalon, i dont have any data on this.
I ran my Ant miner at 65-70c for over a year.. if that puts you at easy at all..
yes, im very near and im thinking it's not good to the miner. Maybe im writing to Avalon asking for real data.
hi All, my A741 is running at Temperature 45-50 / 98 - 100, with 100% fan speed and -1 Power. Anyone know what's the maximum allow for this machine?
What's your temperature ?
What's your temperature ?
i forget the link ...
but i have read until 105 celsius, 221 fahrenheit, all still ok.
but you are really near this temperature ...
hi All, my A741 is running at Temperature 45-50 / 98 - 100, with 100% fan speed and -1 Power. Anyone know what's the maximum allow for this machine?
What's your temperature ?
What's your temperature ?
Jump to: