Pages:
Author

Topic: âš’[CGA] Cryptographic Anomaly - The Elusive Coinâš’ - page 11. (Read 226291 times)

sr. member
Activity: 378
Merit: 250
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?

The P2Pools are on the right chain, too.
See the CGA-P2Pool-scanner, to get the IP-addresses to add them to the config via addnode - as said by crackfoo above for addnode=192.99.35.133.

If you don't know how to add/find the config-file, see this posting: https://bitcointalksearch.org/topic/m.6918351 - but use the P2Pool-node-addresses instead and addnode=192.99.35.133

Please, just let me know when this BS is ALL straightened out! I don't care about all this extra work! Geesh! It's just a coin wallet! Just want my wallet to work the way it's supposed to. Let me know when the problem has been solved, completely! For now I'll just trade my mined CGA for BTC for now and not worry about storing it in my wallet.

These are the "little" problems that can occur after a fork/hardfork, if not enough people update their wallet. Then there are two chains fighting each other. The more people update immediately, the faster the problems go away, since the cryptos all are peer-to-peer based, and if many people don't update, a coin is running into problems like these. Mooncoin, for example, had the same problems for a short time. After the forking-phase with similar hiccups and people complaining, all is now going smoothly again.

But we have to urge the developer to get the official nodes running again as fast as possible so that the wallet can find good peers without adding extra nodes. There you are right.

Thanks coiny! I'm glad you're on the job!  Grin
legendary
Activity: 840
Merit: 1000
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?

The P2Pools are on the right chain, too.
See the CGA-P2Pool-scanner, to get the IP-addresses to add them to the config via addnode - as said by crackfoo above for addnode=192.99.35.133.

If you don't know how to add/find the config-file, see this posting: https://bitcointalksearch.org/topic/m.6918351 - but use the P2Pool-node-addresses instead and addnode=192.99.35.133

Please, just let me know when this BS is ALL straightened out! I don't care about all this extra work! Geesh! It's just a coin wallet! Just want my wallet to work the way it's supposed to. Let me know when the problem has been solved, completely! For now I'll just trade my mined CGA for BTC for now and not worry about storing it in my wallet.

These are the "little" problems that can occur after a fork/hardfork, if not enough people update their wallet. Then there are two chains fighting each other. The more people update immediately, the faster the problems go away, since the cryptos all are peer-to-peer based, and if many people don't update, a coin is running into problems like these. The one wallet is running on the old chain, the next irunning on the forked one. That causes inconsistencies in the network. Mooncoin, for example, had the same problems for a short time. After the forking-phase with similar hiccups and people complaining, all is now going smoothly again.

But we have to urge the developer to get the official nodes running again as fast as possible so that the wallet can find good peers without adding extra nodes. There you are right.
sr. member
Activity: 378
Merit: 250
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?

The P2Pools are on the right chain, too.
See the CGA-P2Pool-scanner, to get the IP-addresses to add them to the config via addnode - as said by crackfoo above for addnode=192.99.35.133.

If you don't know how to add/find the config-file, see this posting: https://bitcointalksearch.org/topic/m.6918351 - but use the P2Pool-node-addresses instead and addnode=192.99.35.133

Please, just let me know when this BS is ALL straightened out! I don't care about all this extra work! Geesh! It's just a coin wallet! Just want my wallet to work the way it's supposed to. Let me know when the problem has been solved, completely! I'll just trade my mined CGA for BTC for now and not worry about storing it in my wallet.
legendary
Activity: 840
Merit: 1000
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?

The P2Pools are on the right chain, too.
See the CGA-P2Pool-scanner, to get the IP-addresses to add them to the config via addnode - as said by crackfoo above for addnode=192.99.35.133.

If you don't know how to add/find the config-file, see this posting: https://bitcointalksearch.org/topic/m.6918351 - but use the P2Pool-node-addresses instead and addnode=192.99.35.133
legendary
Activity: 3556
Merit: 1126
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?

some posts back they mentioned the hardcoded nodes were still down.

addnode=192.99.35.133

should get you moving a little.
sr. member
Activity: 378
Merit: 250
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2

I need the binary!
I downloaded and ran 1.3.4.1,,, says "no block chain available".... what' the deal?
If you present a solution to a problem, make sure it SOLVES the problem and doesn't create a new one!
What is the correct solution?
sr. member
Activity: 378
Merit: 250
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

What's the url again?
thx

It's in the OP

Uhm, the answer IS >>>> http://CGAnomaly.com
legendary
Activity: 3556
Merit: 1126
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.

That version is fine. If you pull the SRC you'll get 1.3.4.2
legendary
Activity: 3556
Merit: 1126
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

What's the url again?
thx

It's in the OP
dlx
member
Activity: 61
Merit: 10
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

No it's not.  It's 1.3.4.1 . We already have this. Is it a kind of a game? Do we win something? Or just confusion.
legendary
Activity: 980
Merit: 1004
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


As long as you have 1.3.4.1 and the same number of blocks as the explorer you are good.
sr. member
Activity: 378
Merit: 250
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.

What's the url again?
thx
legendary
Activity: 3556
Merit: 1126
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.


It IS on their website. Scroll to the bottom you'll see the links for all the platforms.
dlx
member
Activity: 61
Merit: 10
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!

Do we have to BEG for this update?  Where can we find it? It's not in the site. It's not in the first page.
legendary
Activity: 3556
Merit: 1126
CGA coin should be changed to PIA coin! Pain In the ASS coin!  Grin
I HATE all the problems going on with this unstable undependable attention hogging emotional roller coastering poorly written and managed coin!
New Ticker = PIA

everyone just need to get updated. I lost count how many peers I blocked on my firewall cause they weren't upgraded and didn't wnat them poisoning my chain.

But yes, I have had a few problems but I think the message needs to get out more that people need to upgrade.
sr. member
Activity: 378
Merit: 250
CGA coin should be changed to PIA coin! Pain In the ASS coin!  Grin
I HATE all the problems going on with this unstable undependable attention hogging emotional roller coastering poorly written and managed coin!
New Ticker = PIA
legendary
Activity: 840
Merit: 1000
Is there any working CGA-blockchain-explorer with an API?
Cointweak has taken CGA off, because of a missing explorer to fetch the difficulty from.
sr. member
Activity: 322
Merit: 250
Spray and Pray
Everyone please update! The most current version is 1.3.4.2 but the only difference between 1.3.4.1 and 1.3.4.2 is a checkpoint. The hardcoded nodes are still down so please share your peer info with others to help others sync. Any 1.3.4.x version should work but anything less (1.3.3.x) will be the wrong chain! UPDATE and resync if needed!
legendary
Activity: 840
Merit: 1000
Hey guys,

help to stabilize the CGA-network and spread the mining-power evenly across the nodes, in order to prevent the danger of a fork:

CGA-P2Pool-scanner
legendary
Activity: 3556
Merit: 1126
when it ends?)))
when the moon?)))

by the way, what rate you consider adequate for CGA? and when?

whats the current peerinfo show?
Pages:
Jump to: