Topic: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 34. (Read 58892 times)

Quote from: Iamtutut on May 09, 2019, 10:49:52 AM

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !

Can you share some of those tRFC settings, it will give me an idea where to start on RX580s.
Thx

All GPUs are RX574

120 for Samsung memory.
125 for weak GPU with Elpida/Hynix
105 (stock value) for my Sapphire ITX (Elpida/Hynix)

EDIT: these are timings for CN Soft Shell (Turtlecoin).

So you pushed your tRFC values up for your RX570's. I thought we were suppose to lower them slowly?

I had 153 and 163 before lowering them

clousian

newbie

Activity: 33

Merit: 0

Quote from: ganzocrypt on May 09, 2019, 10:38:50 AM

Quote from: ganzocrypt on May 09, 2019, 10:38:50 AM

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !

Can you share some of those tRFC settings, it will give me an idea where to start on RX580s.
Thx

All GPUs are RX574

120 for Samsung memory.
125 for weak GPU with Elpida/Hynix
105 (stock value) for my Sapphire ITX (Elpida/Hynix)

EDIT: these are timings for CN Soft Shell (Turtlecoin).

So you pushed your tRFC values up for your RX570's. I thought we were suppose to lower them slowly?

Iamtutut

full member

Activity: 1120

Merit: 131

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !

Can you share some of those tRFC settings, it will give me an idea where to start on RX580s.
Thx

All GPUs are RX574

120 for Samsung memory.
125 for weak GPU with Elpida/Hynix
105 (stock value) for my Sapphire ITX (Elpida/Hynix)

EDIT: these are timings for CN Soft Shell (Turtlecoin).

ganzocrypt

newbie

Activity: 162

Merit: 0

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !

Can you share some of those tRFC settings, it will give me an idea where to start on RX580s.
Thx

Iamtutut

full member

Activity: 1120

Merit: 131

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: Eliovp on May 08, 2019, 01:15:15 PM

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

You're welcome.

You have to apply the values again yes. See this as a positive thing ;-)

Cheers!

Markyz23

newbie

Activity: 30

Merit: 0

Quote from: ?? on ??

im running into the issue with my vega 64's . I'm using 18.6.1 driver on srbminer because you "cant" use the updated drivers but the Tweaker tool gui needs new drivers can someone explain. Do i just use pixel patcher and update the drivers and srbminer to newest? to then beable to use the lastest Tweaker tool? I was seeing my voltage changing up and down in the old tool going from 900-1100. Is that because of old drivers? And now the tweaker tool wont open.

The GUI version first checks if the installed driver has support for the overdrive functions in the tool, if not, in theory, you should just see empty space where all the clock control is.
Or.. an error message.. Embarrassed

As stated before, to solve that, update drivers to 19.4.*, a lot of earlier versions will work as well. As long as the overdrive API is supported.

If that all still doesn't work, there's still the CLI version you can download and run. It's purely written for timing modifications and nothing else.

Quote from: Markyz23 on May 08, 2019, 12:03:08 PM

Hei.

Anybody used this tool on RX 570 4GB?

I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.

Thanks:)

Try to work with small steps.
things such as tRFC, drop those slightly, benchmark for a bit, do this in steps until your GPU crashes, then just revert back to latest working modifications.
This will already give you an increase.

Have fun!

Cheers

Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: ?? on ??

im running into the issue with my vega 64's . I'm using 18.6.1 driver on srbminer because you "cant" use the updated drivers but the Tweaker tool gui needs new drivers can someone explain. Do i just use pixel patcher and update the drivers and srbminer to newest? to then beable to use the lastest Tweaker tool? I was seeing my voltage changing up and down in the old tool going from 900-1100. Is that because of old drivers? And now the tweaker tool wont open.

The GUI version first checks if the installed driver has support for the overdrive functions in the tool, if not, in theory, you should just see empty space where all the clock control is.
Or.. an error message.. Embarrassed

As stated before, to solve that, update drivers to 19.4.*, a lot of earlier versions will work as well. As long as the overdrive API is supported.

If that all still doesn't work, there's still the CLI version you can download and run. It's purely written for timing modifications and nothing else.

Quote from: Markyz23 on May 08, 2019, 12:03:08 PM

Hei.

Anybody used this tool on RX 570 4GB?

I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.

Thanks:)

Try to work with small steps.
things such as tRFC, drop those slightly, benchmark for a bit, do this in steps until your GPU crashes, then just revert back to latest working modifications.
This will already give you an increase.

Have fun!

Cheers

Markyz23

newbie

Activity: 30

Merit: 0

Hei.

Anybody used this tool on RX 570 4GB?

I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.

Thanks:)

keksik

jr. member

Activity: 169

Merit: 1

Quote from: P00P135 on May 07, 2019, 03:22:00 PM

Quote from: ManDoneKTM on May 07, 2019, 03:01:17 PM

was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?

Quote from: ManDoneKTM on May 07, 2019, 03:01:17 PM

rx480 8 gb, Happy mining!

LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL .

Most people with 4XX 5XX are fine with 29-31 Mhs because to push higher you need to use more power which isn't worth. Finding the perfect hash to watt ratio is better in this current mining climate.

1150Mhz core at 1150mV, isnt that too much? whats is best value? im using 850mV and when not stable lowering to 1120Mhz. whats it proper voltage for 1200Mhz core?

fb23aa

newbie

Activity: 8

Merit: 0

was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?

Quote from: rednoW on May 08, 2019, 02:59:36 AM

rx480 8 gb, Happy mining!

https://i.postimg.cc/gJ8ZQJDm/rx480amdtweak.png

LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL .

Why don't you share with us your timings, that would be constructive...

kwejk

newbie

Activity: 1

Merit: 0

Quote from: Beba50c on May 08, 2019, 01:11:46 AM

XFX Vega 56 Blower Samsung memory claymore 12 https://imgur.com/a/uwEUtzG

Gonna see same nice fried Vega )) Add some fan speed ))

Fanspeed is visible in CPU-Z. 90%, 4500 PRM. So it looks good to me. Just not seen in the tweak tool for some reason.

Are you using Vega64 BIOS?

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Beba50c on May 08, 2019, 01:11:46 AM

XFX Vega 56 Blower Samsung memory claymore 12 https://imgur.com/a/uwEUtzG

Gonna see same nice fried Vega )) Add some fan speed ))

Beba50c

newbie

Activity: 1

Merit: 0

XFX Vega 56 Blower Samsung memory claymore 12 https://imgur.com/a/uwEUtzG

P00P135

full member

Activity: 1123

Merit: 136

Quote from: ManDoneKTM on May 07, 2019, 03:01:17 PM

was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?

rx480 8 gb, Happy mining!

LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL .

Most people with 4XX 5XX are fine with 29-31 Mhs because to push higher you need to use more power which isn't worth. Finding the perfect hash to watt ratio is better in this current mining climate.

ManDoneKTM

newbie

Activity: 150

Merit: 0

was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?

rx480 8 gb, Happy mining!

https://i.postimg.cc/gJ8ZQJDm/rx480amdtweak.png

LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL .

nahoi

newbie

Activity: 1

Merit: 0

was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?