AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 40.

livada

newbie

Activity: 417

Merit: 0

Quote from: Zorg33 on April 25, 2019, 09:53:38 AM

Quote from: livada on April 25, 2019, 09:30:58 AM

vega 56-hynix
i use this setup
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
work 10-12 hour with 2-3 error and block all comp and dont go tu restart:(

what i must chage? what step i must use?
etc: rp14 to rp15
rfc 156 chg to rfc 157 ? or i must use 168 or higher?

what step use ? 1? or nubmer /with 8 or 16?

--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600 - work but i must little downclock this, but i dont know how and what...

i try down mem 1100 to 1090mhz but again have error
i try give more power. now work with 870mv and i try with 920mv but again have error

pls any tutotrial what formula work with rp rc rfc ref etc....

read back a little for formulas

if your hynix memclk is really 1100 then and it's stable at stock timings, then rfc and rc and rcdwr are too low imho.

i read all page but not see any forumula..(i go read again)

my mistake- 1100 for samsung. 1 samsung card always have error 1100 or 1090 .

Gtx1070rig

jr. member

Activity: 56

Merit: 4

Quote from: SigiSinatra on April 24, 2019, 09:39:35 PM

I can't start GUI version at all.
I double click on .exe and nothing happens.

Version 0.1.7 worked and now it won't. Does .net framework (required for gui) maybe affects it ?
I was getting 2400 h/s with vega 64 and 2200 h/s on vega 56 (64 bios) with Teamredminer.
After restart it simply won't. I tried to run it as admin and without and still nothing.

Also, when I type winamdtweak.exe --current console just flash for sec and disappears. I tried with cmd /k but it doesn't work.
If I try to run CMD as an administrator I get failed to load EIO.dll

Any solutions?
Thank you

Use full path

"C:\PathtoAmdMemTweak\winamdtweak.exe --curren"
pause?
And run as admin ...

Zorg33

jr. member

Activity: 144

Merit: 2

Quote from: livada on April 25, 2019, 09:30:58 AM

vega 56-hynix
i use this setup
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
work 10-12 hour with 2-3 error and block all comp and dont go tu restart:(

what i must chage? what step i must use?
etc: rp14 to rp15
rfc 156 chg to rfc 157 ? or i must use 168 or higher?

what step use ? 1? or nubmer /with 8 or 16?

--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600 - work but i must little downclock this, but i dont know how and what...

i try down mem 1100 to 1090mhz but again have error
i try give more power. now work with 870mv and i try with 920mv but again have error

pls any tutotrial what formula work with rp rc rfc ref etc....

read back a little for formulas

if your hynix memclk is really 1100 then and it's stable at stock timings, then rfc and rc and rcdwr are too low imho.

livada

newbie

Activity: 417

Merit: 0

vega 56-hynix
i use this setup
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
work 10-12 hour with 2-3 error and block all comp and dont go tu restart:(

what i must chage? what step i must use?
etc: rp14 to rp15
rfc 156 chg to rfc 157 ? or i must use 168 or higher?

what step use ? 1? or nubmer /with 8 or 16?

--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600 - work but i must little downclock this, but i dont know how and what...

i try down mem 1100 to 1090mhz but again have error
i try give more power. now work with 870mv and i try with 920mv but again have error

pls any tutotrial what formula work with rp rc rfc ref etc....

logicalray77

jr. member

Activity: 66

Merit: 4

Interested to see what RX580 results are like. Please share if any...
I have 120 cards and a boost would help.

SigiSinatra

newbie

Activity: 50

Merit: 0

Quote from: livada on April 25, 2019, 04:01:45 AM

Quote from: saltednutz on April 25, 2019, 03:47:49 AM

Quote from: livada on April 25, 2019, 03:21:38 AM

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

http://eliovp.com/LatestGUIRX.png
http://eliovp.com/LatestGUIVega.png

not work- old version work. why? i dont now i try all but not start Sad

i try to win10pro win 10home and win7 64bit -not work
---

pls . how i see current mem? i try in win and CMD.
WinAMDTweak.exe --curent
and
WinAMDTweak.exe -current
but not work.

did you try WinAMDTweak.exe --current?
or was that a typo?

yes i try. this is typo:)

EDIT: i solved.
when start in CMD WinAMDTweak.exe --current he start but only 0,00001sec and close and i not see this windows in TeamViever(NET slovly)
now i use tweak curent.bat and comand
WinAMDTweak.exe --current
pause
and now i see

new GUI not work Sad

It doesn't work for me.
I added
WinAMDTweak.exe --current
PAUSE
in .bat file and it still disappears almost instantly.

livada

newbie

Activity: 417

Merit: 0

Quote from: saltednutz on April 25, 2019, 03:47:49 AM

Quote from: livada on April 25, 2019, 03:21:38 AM

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

http://eliovp.com/LatestGUIRX.png
http://eliovp.com/LatestGUIVega.png

not work- old version work. why? i dont now i try all but not start Sad

i try to win10pro win 10home and win7 64bit -not work
---

pls . how i see current mem? i try in win and CMD.
WinAMDTweak.exe --curent
and
WinAMDTweak.exe -current
but not work.

did you try WinAMDTweak.exe --current?
or was that a typo?

yes i try. this is typo:)

EDIT: i solved.
when start in CMD WinAMDTweak.exe --current he start but only 0,00001sec and close and i not see this windows in TeamViever(NET slovly)
now i use tweak curent.bat and comand
WinAMDTweak.exe --current
pause
and now i see

new GUI not work Sad

saltednutz

newbie

Activity: 4

Merit: 0

Quote from: livada on April 25, 2019, 03:21:38 AM

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

http://eliovp.com/LatestGUIRX.png
http://eliovp.com/LatestGUIVega.png

not work- old version work. why? i dont now i try all but not start Sad

i try to win10pro win 10home and win7 64bit -not work
---

pls . how i see current mem? i try in win and CMD.
WinAMDTweak.exe --curent
and
WinAMDTweak.exe -current
but not work.

did you try WinAMDTweak.exe --current?
or was that a typo?

livada

newbie

Activity: 417

Merit: 0

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

http://eliovp.com/LatestGUIRX.png
http://eliovp.com/LatestGUIVega.png

not work- old version work. why? i dont now i try all but not start Sad

i try to win10pro win 10home and win7 64bit -not work
---

pls . how i see current mem? i try in win and CMD.
WinAMDTweak.exe --curent
and
WinAMDTweak.exe -current
but not work.

SamAlackass

newbie

Activity: 27

Merit: 1

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

http://eliovp.com/LatestGUIRX.png
http://eliovp.com/LatestGUIVega.png

Not working for me either. No errors, just nothing happens. On two different windows systems, 18.5.1.

saltednutz

newbie

Activity: 4

Merit: 0

Quote from: pbfarmer on April 24, 2019, 03:42:24 PM

Quote from: frozen80 on April 24, 2019, 02:49:30 PM

Hi guys,

I have a Sapphire Nitro+ Vega56 with default bios and Hynix memory with the defaults:

Code:

GPU 0: Vega 10 XL/XT [Radeon RX Vega 56/64] Memory state: 0x118 (800MHz)
Timing 1 CL: 18 RAS: 24 RCDRD: 22 RCDWR: 10
Timing 2 RCAb (RC): 37 RCPb (RC): 37 RPAb (RP): 13 RPPb (RP): 13
Timing 3 RRDS: 3 RRDL: 3 RTP: 6
Timing 4 FAW: 13
Timing 5 CWL: 6 WTRS: 4 WTRL: 4
Timing 6 WR: 12
Timing 7 RREFD: 7
Timing 8 RDRDDD: 3 RDRDSD: 2 RDRDSC: 1 RDRDSCL: 3
Timing 9 WRWRDD: 3 WRWRSD: 2 WRWRSC: 1 WRWRSCL: 3
Timing 10 WRRD: 1 RDWR: 18
Timing 12 REF: 3200
Timing 13 MRD: 4 MOD: 12
Timing 14 XS: 216
Timing 16 XSMRS: 216
Timing 17 PD: 7 CKSRE: 8 CKSRX: 8
Timing 20 RFCPB: 96 STAG: 7
Timing 21 XP: 7 CPDED: 2 CKE: 7
Timing 22 RDDATA: 17 WRLAT: 4 RDLAT: 14 WRDATA: 1
Timing 23 CKESTAG: 2
RFC Timing RFC: 176

Until now the only value i could change was --ref 12800 which increased the hashrate from 18.5 to 19.5 kh on cn-turtle.
I'm using TR4.4 with L22+22 and driver 18.6.1.
Unfortunately with other values posted here i had no luck Sad

What values do you think i could try to change based on my defaults?

The settings I've found to generally have the most impact after REF are RP (then change RC accordingly using RC = RP + RAS), and RCDRD/RCDWR. Just start dropping them 1 at a time until you see errors, then go back 1. Work w/ one parameter at a time so you know which is causing the errors.

hey farmer, are you still using ppt at all? the ones from the past?

Mashy81

jr. member

Activity: 225

Merit: 1

Quote from: SigiSinatra on April 24, 2019, 09:39:35 PM

I can't start it.
I double click on .exe and nothing happens.

Version 0.1.7 worked and now it won't. Does .net framework (required for gui) maybe affects it ?
I was getting 2400 h/s with vega 64 and 2200 h/s on vega 56 (64 bios)
Also, when I type winamdtweak.exe --current console just flash for sec and disappears. I tried with cmd /k but it doesn't work.
If I try to run CMD as an administrator I get failed to load EIO.dll

Any solutions?
Thank you

Are you using srb miner. This has happened to some people running srbminer

SigiSinatra

newbie

Activity: 50

Merit: 0

I can't start GUI version at all.
I double click on .exe and nothing happens.

Version 0.1.7 worked and now it won't. Does .net framework (required for gui) maybe affects it ?
I was getting 2400 h/s with vega 64 and 2200 h/s on vega 56 (64 bios) with Teamredminer.
After restart it simply won't. I tried to run it as admin and without and still nothing.

Also, when I type winamdtweak.exe --current console just flash for sec and disappears. I tried with cmd /k but it doesn't work.
If I try to run CMD as an administrator I get failed to load EIO.dll

Any solutions?
Thank you

TheRealSTU

newbie

Activity: 5

Merit: 0

Quote from: Eliovp on April 24, 2019, 08:00:04 PM

Clock Control (Both Core and Memory)

Is this tool now a good substitute for PPT registry edit?

Eliovp

legendary

Activity: 1050

Merit: 1294

Huh?

Hey all!

Just to let you know that i've released a new GUI version with muchos improvements and options.
A few of those..

Bug Fixes
Clock Control (Both Core and Memory)
Fan Control (Curve)
Export/Import values
Reset option
Removed EIO requirement
....

Link

Some shots

bobymoore

newbie

Activity: 61

Merit: 0

Quote from: reaper7881 on April 24, 2019, 02:57:23 PM

Same trm 0.4.3 works better for me

When I said the same, someone said that I want to make a statement, I did not answer, but as you mentioned it, I will say what I have done so far. The truth is that due to lack of time I have not managed to run the tool, but I did a lot of testing. What I understand is that the 4.4 version is doing more, but finding the right driver and maybe a fresh installation of the windows. Trying one of the last drivers would be a better choice. A two-computer holder, on one I managed to catch 2150 hash, in both 56 @ 64 Vegas, I did not do much on the other computer on both 64s because one did not go over 1000 hash, that's from me.
I will come back when I finally find time to use this wonderful tool, I came peacefully, with thirst for help and learning. Thanks again to the founder and those who help. I willI donate to the founder. Something last 2,5% fee to teamredminer is 2200x2,5÷100=55 hash? So it's fee?

pbfarmer

member

Activity: 340

Merit: 29

Quote from: frozen80 on April 24, 2019, 02:49:30 PM

Hi guys,

I have a Sapphire Nitro+ Vega56 with default bios and Hynix memory with the defaults:

Code:

GPU 0: Vega 10 XL/XT [Radeon RX Vega 56/64] Memory state: 0x118 (800MHz)
Timing 1 CL: 18 RAS: 24 RCDRD: 22 RCDWR: 10
Timing 2 RCAb (RC): 37 RCPb (RC): 37 RPAb (RP): 13 RPPb (RP): 13
Timing 3 RRDS: 3 RRDL: 3 RTP: 6
Timing 4 FAW: 13
Timing 5 CWL: 6 WTRS: 4 WTRL: 4
Timing 6 WR: 12
Timing 7 RREFD: 7
Timing 8 RDRDDD: 3 RDRDSD: 2 RDRDSC: 1 RDRDSCL: 3
Timing 9 WRWRDD: 3 WRWRSD: 2 WRWRSC: 1 WRWRSCL: 3
Timing 10 WRRD: 1 RDWR: 18
Timing 12 REF: 3200
Timing 13 MRD: 4 MOD: 12
Timing 14 XS: 216
Timing 16 XSMRS: 216
Timing 17 PD: 7 CKSRE: 8 CKSRX: 8
Timing 20 RFCPB: 96 STAG: 7
Timing 21 XP: 7 CPDED: 2 CKE: 7
Timing 22 RDDATA: 17 WRLAT: 4 RDLAT: 14 WRDATA: 1
Timing 23 CKESTAG: 2
RFC Timing RFC: 176

Until now the only value i could change was --ref 12800 which increased the hashrate from 18.5 to 19.5 kh on cn-turtle.
I'm using TR4.4 with L22+22 and driver 18.6.1.
Unfortunately with other values posted here i had no luck Sad

What values do you think i could try to change based on my defaults?

The settings I've found to generally have the most impact after REF are RP (then change RC accordingly using RC = RP + RAS), and RCDRD/RCDWR. Just start dropping them 1 at a time until you see errors, then go back 1. Work w/ one parameter at a time so you know which is causing the errors.

reaper7881

newbie

Activity: 27

Merit: 0

Same trm 0.4.3 works better for me

frozen80

newbie

Activity: 18

Merit: 1

Hi guys,

I have a Sapphire Nitro+ Vega56 with default bios and Hynix memory with the defaults:

Code:

GPU 0: Vega 10 XL/XT [Radeon RX Vega 56/64] Memory state: 0x118 (800MHz)
Timing 1 CL: 18 RAS: 24 RCDRD: 22 RCDWR: 10
Timing 2 RCAb (RC): 37 RCPb (RC): 37 RPAb (RP): 13 RPPb (RP): 13
Timing 3 RRDS: 3 RRDL: 3 RTP: 6
Timing 4 FAW: 13
Timing 5 CWL: 6 WTRS: 4 WTRL: 4
Timing 6 WR: 12
Timing 7 RREFD: 7
Timing 8 RDRDDD: 3 RDRDSD: 2 RDRDSC: 1 RDRDSCL: 3
Timing 9 WRWRDD: 3 WRWRSD: 2 WRWRSC: 1 WRWRSCL: 3
Timing 10 WRRD: 1 RDWR: 18
Timing 12 REF: 3200
Timing 13 MRD: 4 MOD: 12
Timing 14 XS: 216
Timing 16 XSMRS: 216
Timing 17 PD: 7 CKSRE: 8 CKSRX: 8
Timing 20 RFCPB: 96 STAG: 7
Timing 21 XP: 7 CPDED: 2 CKE: 7
Timing 22 RDDATA: 17 WRLAT: 4 RDLAT: 14 WRDATA: 1
Timing 23 CKESTAG: 2
RFC Timing RFC: 176

Until now the only value i could change was --ref 12800 which increased the hashrate from 18.5 to 19.5 kh on cn-turtle.
I'm using TR4.4 with L22+22 and driver 18.6.1.
Unfortunately with other values posted here i had no luck Sad

What values do you think i could try to change based on my defaults?

SamAlackass

newbie

Activity: 27

Merit: 1

Quote from: Art Gar on April 24, 2019, 12:07:55 PM

Quote from: SamAlackass on April 24, 2019, 02:59:49 AM

Seems to be working on 18.5.1 too if anyone is interested!

very interesting. if you can please share your results. rx580 gddr5 interesting. All internet timings is cool of course. but when timings I can tweak myself - that is cool. Please share your playing to start for noobies.. Thanks for early.

I have very little to share atm I'm afraid. That was just a few quick runs on a single vega 56 test system, just trying to understand why WinAMDTweak isn't working at all in one of my systems, and I needed to make sure 18.5.1 wasn't the source of the problem.

This is on a very un-optimized system and all but the last run, were only about an hour long. So please take everything with a grain of salt. All on the same system (vega 56 hynix), same ODNT settings (1350 core, 980 mem), CNR only.

XMRig w/o memtweak 1650 h/s, with memtweak 1930 h/s
TRM w/o 1935 h/s, with 2072 h/s (still running after 9 hours)

Power consumption seemed about the same on all runs but I can't really tell from such short runs, and timings used were anwil's from a few pages back (thank you anwil!).

Topic: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 40. (Read 58906 times)