AMD New Drivers Adrenalin - mining Perf same, Claymore temp/fan monitoring broke - page 2.

Souran

jr. member

Activity: 59

Merit: 4

Quote from: tets on December 21, 2017, 11:33:54 PM

has anyone worked out a way to turn on compute mode on recent drivers without using AMD settings?

add this DWORD to the below registry path: KMD_EnableInternalLargePage, set value to 2 to enable compute mode

"HKLM\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\XXXX"
where "XXXX" is the card number.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: tets on December 21, 2017, 11:33:54 PM

has anyone worked out a way to turn on compute mode on recent drivers without using AMD settings?

Yes, it's exists way through registry editing. Just search "Mining (Altcoins)" part of forum.

tets

newbie

Activity: 1

Merit: 0

has anyone worked out a way to turn on compute mode on recent drivers without using AMD settings?

Lenorag

member

Activity: 104

Merit: 12

Quote from: bouldou on December 12, 2017, 04:16:42 PM

What's the point to install those drivers, if it doesn't improve hashrate and breaks Claymore's compatibility ?

I'll stick with my old blockchain driver Grin

same here

dlezama

member

Activity: 140

Merit: 17

Quote from: toptek on December 21, 2017, 10:29:39 PM

Quote from: dlezama on December 21, 2017, 09:57:01 PM

With 17.12.1 wattman became horribly slow, every time I click on a card I have to wait a couple of minutes for it to appear. Anyone else seeing this? I didn't find it as a known issue for the release.

why not us the new version of after burner 4.2.2 final out today it works with that driver and one card, haven't tested it yet on a four card rig . which was or maybe was having issue with four cards or more and that driver,

Afterburner doesn't seem to recognize my cards correctly, even the name of the cards appears blank.
Edit: RX-580 cards

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: dlezama on December 21, 2017, 09:57:01 PM

With 17.12.1 wattman became horribly slow, every time I click on a card I have to wait a couple of minutes for it to appear. Anyone else seeing this? I didn't find it as a known issue for the release.

why not us the new version of after burner 4.2.2 final out today it works with that driver and one card, haven't tested it yet on a four card rig . which was or maybe was having issue with four cards or more and that driver,

dlezama

member

Activity: 140

Merit: 17

With 17.12.1 wattman became horribly slow, every time I click on a card I have to wait a couple of minutes for it to appear. Anyone else seeing this? I didn't find it as a known issue for the release.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: UnclWish on December 21, 2017, 12:42:12 PM

AMD released 17.12.2 driver. Who tried allready, is they repaired compatibility with Claymore temp/voltage/fans monitoring and control?

It is not amd that needs to do anything to fix it, its claymore that needs to do something to match amd's settings.

Quote from: MickDaster on December 21, 2017, 06:42:15 PM

Just wait a while and there will probably a new version of miners which will work with the new AMD drivers

This.

MickDaster

full member

Activity: 167

Merit: 100

Quote from: UnclWish on December 21, 2017, 02:39:04 PM

Quote from: Skull_perm on December 21, 2017, 02:06:34 PM

Quote from: UnclWish on December 21, 2017, 12:42:12 PM

AMD released 17.12.2 driver. Who tried allready, is they repaired compatibility with Claymore temp/voltage/fans monitoring and control?

No

Thanks. Will not install it then...

Just wait a while and there will probably a new version of miners which will work with the new AMD drivers

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Skull_perm on December 21, 2017, 02:06:34 PM

Quote from: UnclWish on December 21, 2017, 12:42:12 PM

AMD released 17.12.2 driver. Who tried allready, is they repaired compatibility with Claymore temp/voltage/fans monitoring and control?

No

Thanks. Will not install it then...

Skull_perm

newbie

Activity: 1

Merit: 0

Quote from: UnclWish on December 21, 2017, 12:42:12 PM

AMD released 17.12.2 driver. Who tried allready, is they repaired compatibility with Claymore temp/voltage/fans monitoring and control?

No

UnclWish

sr. member

Activity: 1484

Merit: 253

AMD released 17.12.2 driver. Who tried allready, is they repaired compatibility with Claymore temp/voltage/fans monitoring and control?

MickDaster

full member

Activity: 167

Merit: 100

as far as i have seen the only thing that it does is crash cant stabilize it, so i moved back to the old ones

oddity2505

member

Activity: 120

Merit: 10

Is there improvement on any of the 17.1x drivers over blockchain ones? Especially for monero mining?

MickDaster

full member

Activity: 167

Merit: 100

Any more news on usage of this new amd driver or not?

Grimbarian

newbie

Activity: 15

Merit: 0

Quote from: BCCrypto68 on December 15, 2017, 12:15:42 AM

Just wanted to throw my info into the ring. I'm doing some testing on building a mining rig, and I've been stable on my personal desktop with Win 10 x64 on Crimson 17.11.4 drivers on an MSI RX 580 8GB- because of conditions it's running under I'm getting ~23 MH/s ETH & 60 MH/s LBRY dual mining using Claymore 10.2. For me using the block-chain drivers -vs- the production drivers changed to compute it didn't make a hashrate difference.

Once I installed the new Adrenalin drivers my hash rates went to ~31+ MH/s & 80+ MH/s with the card running cooler and using less power, however ETH wasn't actually hashing - I kept getting an error and I wasn't getting any shares into the pool - however the LBRY hash rate was legit and I was successful in mining those.

I've also experienced the no fan/gpu/mem speed control issues, but I was able to use wattman or afterbuner to control those.

I'm assuming you enable computing mode? Is it normal if you have two or more cards there's no workload option?

MickDaster

full member

Activity: 167

Merit: 100

how much did the hash rate increase? and which cards you got?

BCCrypto68

newbie

Activity: 27

Merit: 0

Just wanted to throw my info into the ring. I'm doing some testing on building a mining rig, and I've been stable on my personal desktop with Win 10 x64 on Crimson 17.11.4 drivers on an MSI RX 580 8GB- because of conditions it's running under I'm getting ~23 MH/s ETH & 60 MH/s LBRY dual mining using Claymore 10.2. For me using the block-chain drivers -vs- the production drivers changed to compute it didn't make a hashrate difference.

Once I installed the new Adrenalin drivers my hash rates went to ~31+ MH/s & 80+ MH/s with the card running cooler and using less power, however ETH wasn't actually hashing - I kept getting an error and I wasn't getting any shares into the pool - however the LBRY hash rate was legit and I was successful in mining those.

I've also experienced the no fan/gpu/mem speed control issues, but I was able to use wattman or afterbuner to control those.

MickDaster

full member

Activity: 167

Merit: 100

i had the same issue, cards are using more power and then after an hour they stop working, i went back to original blockchain

R0land

jr. member

Activity: 208

Merit: 3

After a few minutes of mining ETH with Claymore, the miner hangs and restart automaticly, but consumes more power (+20%).
Sad

Topic: AMD New Drivers Adrenalin - mining Perf same, Claymore temp/fan monitoring broke - page 2. (Read 2980 times)