Topic: ✅ [ANN] 01 Coin [ZOC] ♦️POW/Masternodes ♦️ OFFICIAL - page 4. (Read 9511 times)

Hey Dioo89,

Can you make me a step by step video or explain alittle more on here what all I need in order to setup my 01coin (ZOC) masternode (Step by step and explain everything I will need.)  I bought 1008 ZOC 2 weeks ago but still haven't been able to figure out how to set it up. I can pay you in BTC once you're done

I can do mining from cpu/gpu this coin now? I can do solo mining now?

From the Community to the ZOC developers,

At the moment we're a reasonably sized passionate community who wants to make ZOC into a great coin.
Already more then 300 master nodes have been set-up. Many of them with the help of the community on Discord.

We as a community want a few things

1. Transparency
You said
"each user can see each byte of our system. This total transparency is the main and only proof of 01coin."
Looking at the GitHub repository this statement can mean one of two things.
- You've not written a single line of code since the release. (Na activity)
- You've not released a single line of code written since release. (No transparency)

2. Communication
In short; what is the roadmap? What are you working on? and where do you plan on taking this project?

3. Control
It has become abundantly clear that you're either doing nothing, or working hard on the coin. We all hope it's the latter of course. And that would be no problem; perfectly fine! But please give the community the ability to manage themselves. For example give a few key users the ability to moderate on Discord. This way we can take care of, and develop, the community side of the coin.


Please respond within a week otherwise we'll assume you've abandoned the project and we'll give it new life by:
- forking ZOC
- burning the premine
- contacting exchanges and pools to switch to the fork.
- moving the community to a new bitcointalk topic, new Discord group and a new Github repositorie.

Regards
The ZeroOne Community.

good afternoon, the "ZOC" has algorithm "NeoScrypt" the cryptmoeda can be mined with CPU's or only with GPU's?

Probably Hard at work. I hope

Its seems like the devs are either hard at work, or have left....
about the website I'm not sure what you mean, but the coin does not have an official website at the moment

Hi. Why is not the monster listed on other trading sites? Why is not the coin promoted? Why does not the official site look like a coin? Does anyone have answers to these questions?

Be sure to hard the hack task, get yourself scary in your VPS seeing content of log real attack attempts to hack your VPS...


learn basics from this yt:  https://www.youtube.com/watch?v=X_VP10X2TEs
or even this blog:  https://geekflare.com/cloud-vm-security-guide/

You can get your VPS hosting in Europe (VPS = Virtual Private Server) from:  https://billing.time4vps.eu/?affid=2853

Hi ZOC supportes and haters,
the 'Zero One Coin' ZOC coin name is 'Great', we need community devs and marketeers and so on...

 Have a Good Weekend.

https://pbs.twimg.com/media/DW_SmBPWsAAqdAm.jpg

Hello,
What is happenning that  99% ZOC  MN's  are in state NEW_START_REQUIRED?
Come on guys' all re-start your ZOC MN's ...

Hello DEV team
is this dash post relevant?
https://www.dash.org/forum/threads/heads-up-a-lot-of-masternodes-have-new_start_required-as-their-status.13476/

Would you check  this fix   https://github.com/dashpay/dash/pull/1401/files
into  ZOC MN  relevant?

it looks like code is already updated; and this problem is also common in all dash forks 
https://support.node40.com/hc/en-us/articles/115002357908-Why-does-my-Dash-QT-Wallet-show-a-status-of-NEW-START-REQUIRED-

helo guys! here the 100% working VPS setup for ZOC masternode!

if you have VPS server(ubuntu 14.04),start PUTTY,login-root password-your server password

first use these commands!!!!!!

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install software-properties-common python-software-properties
sudo add-apt-repository ppa:git-core/ppa

sudo apt-get update
sudo apt-get install git
sudo apt-get install -y pkg-config

sudo apt-get install build-essential
sudo apt-get install libtool autotools-dev autoconf automake
sudo apt-get install libssl-dev
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libboost-all-dev
sudo apt-get install libdb4.8-dev
sudo apt-get install libdb4.8++-dev
sudo apt-get install libevent-dev

Wallet setup!!!

mkdir zeroone

cd zeroone

wget https://github.com/zeroonecoin/zeroonecoin/raw/master/release/zeroone-linux.tar.gz
 
Now un-tar (i.e. unzip) the files by typing
 
tar -xvf zeroone-linux.tar.gz
 
Now remove the download by typing
 
rm zeroone-linux.tar.gz
 
Now create the 01 configuration file by typing
 
cd ..
 
mkdir .zeroonecore && nano .zeroonecore/zeroone.conf

In the file editor put the following into the file replacing the IP address with the one for your VPS and the masternodeprivkey with the private key we generated earlier (copy it from the masternode configuration file). The rpcuser and rpcpassword can be anything you want - don't copy mine! - but they must contain ​no special characters​, only the basic english set or there will be errors thrown and things won’t work properly
 
#mn1 
rpcuser=mn1
rpcpassword=pOyOjhgRdghb34rvweFJ6
 
externalip=80.123.123.123:10000
 
masternode=1
masternodeprivkey=7rcm1p3p2JHVMDrKQCK4fadzJUUgcE736eP1j3dTYo3tc2tgfdSc
maxconnections=25
addnode=128.199.62.128
addnode=159.65.24.219
addnode=188.166.91.38
addnode=174.138.10.244
 
Now close and exit by typing ctrl-x then y then enter. Now start 01 by typing
zeroone/zerooned -daemon
Make sure it’s running by typing (you will probably see an error about creating the wallet, thats ok its means its running)
 
zeroone/zeroone-cli getinfo
Now wait until the masternode has synced up fully by typing 
 
watch zeroone/zeroone-cli mnsync status
 
This will update every two seconds and you need to wait till this shows 999 under the assetID section. Once it does exit the watch by typing ctrl-c. Now start watching the masternode status by typing 
 
watch zeroone/zeroone-cli masternode status
 
This should be something about the masternode not being in the masternode list. Thats all good for the moment, now switch back to the QT wallet. Now check how many confirmations that the transaction that sent the 1000 coins has had by hovering over it with the mouse. If it has 15 or more confirmations then close the 01 QT wallet down, re-open it and wait for it to sync again. Now go to the masternode tab and click on the my masternodes sub tab. You should have a masternode in there that matches the configuration you put in the masternode configuration file, with the word “MISSING” for its status. Now click the “start MISSING” button, say yes you are sure, then type in your password and press enter. If everything has been set up right it will tell you you have successfully started your masternode and on the VPS the masternode will have changed status to “masternode successfully started”. The status in the QT wallet will go to pre-enabled for 10 minutes or so then switch to enabled.
 

My 5cents why  'my' ZOC MN always in "PRE_ENABLE" at start, and then always "NEW_START_REQUIRED" and then always "EXPIRED"  .
'I guess' current version (v0.12.1.3-unk (32-bit)) ZOC MN requires server port-forwarding configurations of all routers from public IPv4 for the port 10000, or put your pc at the DMZ.
Because 'I guess' ZOC is DASH fork, even DASH foruns do not 'support' help pages for windows masternodes, unless ZOC dev team do the necessary code enhancements so that it works smoth with only MN tunneling done between servers (as it works great in PNX MNs) without using NAT/PAT 'normal' IPv4 TCP/IP end to end connections that are not possible using home-routing networks.

Hello I am setting a Windows MN behind a firewall ...
I also am getting always the PRE_ENABLED state...

At Options-Network I have unchecked (not selected) the 'Allow incoming connections'.

In debug console I got status:
12:39:43
masternode status
12:39:43
{
  "vin": "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
  "service": "89.180.148.122:10000",
  "status": "Not capable masternode: Could not connect to 89.180.148.122:10000"
}

This ZOC MN is not compatible with usual routers?
Why not ZOC MN initiated tunnel to the others ZOC MN's?
Why cant I change the port number to anything else besides 10000?

(I did not have such problems with the PNX MN ...)
Is it required to have router with UPnP ?
Is it required to be able to open 'virtual application' at port 10000?

Great Coin, Great Project. I Invested

NEW POOL update ZERO ONE


asiapool.trade

Welcome ! https://discord.gg/XeBsJ

News from dev:

 :(Helo guys! Multiple masternode working on this coin? 1srver(vultr,ubuntu) and 1 wallet,2 or more masternode....sorry i dont speak english...when yes,please write here guide...this is my first masternode and first time i use ubuntu,and vps server...thank you for help!!!

Looks good.. Will invest...

Hello I am new to zoc masternodes and masternodes in general. I got my zoc masternode up a couple days ago and payouts were fine 13 zoc every 10 hours until this morning it said my node was offline, then it pre-enabled and went back online and has said enabled since but have not gotten my last 2 payouts... Is this normal? Why did my node go offline? And will my payouts start normally again? Thank you.