I think you meant MintPal
Done Voting cryptsy
Done Voting cryptsy
PND has hit MintPal right after UTC, also thanks to combined efforts.
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 209. (Read 946654 times)
April 27, 2014, 04:52:57 AM
Thanks again for the votes so far.
PND has hit MintPal right after UTC, also thanks to combined efforts.
PND has hit MintPal right after UTC, also thanks to combined efforts.
April 27, 2014, 04:52:44 AM
Just ignore this troll Beave162 because everything here is "suggested" is to focus attention on its weak yacoin. Worried a bad job nitro and change the amount in the block. Poor guy .. Very soon you will not be able to mine the most profitable coin utc to buy yacoin .. and what you will dump next hahaha 
Oh I almost forgot .. I have for you an appropriate message for your words spoken
Oh I almost forgot .. I have for you an appropriate message for your words spoken
Do not understand what you say from other countries Google Translate mess
Are you saying that UTC is not worth digging it?
April 27, 2014, 04:52:08 AM
ANNOUNCING
The 1st Official UltraCoin Dev Pool is now open!
Built by Ultracoin supporter Thiago and given at no cost to the Ultracoin community, all fees generated by this pool will be donated to the Ultracoin dev fund, for events, promotions and other efforts.
You can find this pool at:
Point some (or all!) of your hash at this pool and help further the success of Ultracoin!
And fees are a low 1%. Join us now!
April 27, 2014, 04:42:23 AM
lol no more blocks eh? Same on ultra2. God what a shitty coin, dev team. Come to YAC already...
We love you to beave! Come on! Join us, be a part of the fun. We know you want to
April 27, 2014, 04:38:26 AM
everybody switch to http://utc.greekpool.eu/ now, nitro 1 and 2 no more blocks now
what's happening with nitro 1 and 2?"Pool was updating to new wallet. All blocks are safe. Crons were disabled. We will continue update tomorrow. Crons enabled now. Blocks should update. Configure your miner here Mandatory client update for Ultracoin please read this message https://bitcointalksearch.org/topic/m.6326450"
April 27, 2014, 04:36:14 AM
Remember when both the PND and UTC communities were voting for UTC on Cryptsy?
Today we're asking you to return this favor.
https://www.cryptsy.com/coinvotes
Today we're asking you to return this favor.
https://www.cryptsy.com/coinvotes
April 27, 2014, 04:30:13 AM
Just ignore this troll Beave162 because everything here is "suggested" is to focus attention on its weak yacoin. Worried a bad job nitro and change the amount in the block. Poor guy .. Very soon you will not be able to mine the most profitable coin utc to buy yacoin .. and what you will dump next hahaha
Oh I almost forgot .. I have for you an appropriate message for your words spoken
Oh I almost forgot .. I have for you an appropriate message for your words spoken
April 27, 2014, 04:25:45 AM
everybody switch to http://utc.greekpool.eu/ now, nitro 1 and 2 no more blocks now
what's happening with nitro 1 and 2?prolly the samething that happened to greekpool the other day
which got fixed btw and all coins was payed out
April 27, 2014, 03:53:34 AM
everybody switch to http://utc.greekpool.eu/ now, nitro 1 and 2 no more blocks now
what's happening with nitro 1 and 2? April 27, 2014, 03:50:33 AM
everybody switch to http://utc.greekpool.eu/ now, nitro 1 and 2 no more blocks now
For how long? Until block reward change? April 27, 2014, 03:50:04 AM
Hi everyone, I have been a bit quiet in regards to the ultra lottery the last few weeks, as i have been busy at work. I have only been giving away 10 UTC a week as the wallet for the lottery is getting very close to being empty .
I am in the process of fundraising so i can have a megadraw in 2 weeks time. 11/05/2014
If anyone has some UTC that they are willing to donate, send it to UjmaVKmXnY6pCo7FiyKpu9Ys4eggEize79
In the meantime there is still 10 UTC up for grabs every Sunday at 10 AM UTC/GMT
You can keep track of the lottery wallet with the block explorer. http://bitgo.pw:3731/address/UjmaVKmXnY6pCo7FiyKpu9Ys4eggEize79
Dont forget Todays Lottery www.ultracoinlottery.com
Thank You
I am in the process of fundraising so i can have a megadraw in 2 weeks time. 11/05/2014
If anyone has some UTC that they are willing to donate, send it to UjmaVKmXnY6pCo7FiyKpu9Ys4eggEize79
In the meantime there is still 10 UTC up for grabs every Sunday at 10 AM UTC/GMT
You can keep track of the lottery wallet with the block explorer. http://bitgo.pw:3731/address/UjmaVKmXnY6pCo7FiyKpu9Ys4eggEize79
Dont forget Todays Lottery www.ultracoinlottery.com
Thank You
April 27, 2014, 03:37:13 AM
everybody switch to http://utc.greekpool.eu/ now, nitro 1 and 2 no more blocks now
April 27, 2014, 02:46:18 AM
Is it right? 
lol no more blocks eh? Same on ultra2. God what a shitty coin, dev team. Come to YAC already...
April 27, 2014, 02:17:41 AM
April 27, 2014, 01:01:15 AM
I getting HW errors with 5x280x kindly help pls...
yacminer.exe --scrypt-chacha -o stratum+tcp://%1 -u roogz.280x -p 280x --nfmin 4 --nfmax 30 --starttime 1388361600 -R 8000 -g 1 -w 256 --buffer-size 2464 --gpu-engine 850 --gpu-memclock 800 --lookup-gap 3 --temp-cutoff 90 --temp-overheat 85
I tried 2656 but 1 GPU disabled.
Lowered until 2464 but HW errors still there.
Should I keep lowering?
yacminer.exe --scrypt-chacha -o stratum+tcp://%1 -u roogz.280x -p 280x --nfmin 4 --nfmax 30 --starttime 1388361600 -R 8000 -g 1 -w 256 --buffer-size 2464 --gpu-engine 850 --gpu-memclock 800 --lookup-gap 3 --temp-cutoff 90 --temp-overheat 85
I tried 2656 but 1 GPU disabled.
Lowered until 2464 but HW errors still there.
Should I keep lowering?
--worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 7680
April 26, 2014, 11:31:15 PM
Just an FYI for anyone who may be interested, since there isn't a lot of current talk regarding "Green Team" miners:
I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
Care to share your 750Ti settings? I have 1 to play with.I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
Well, I haven't even really tweaked it yet. That's one of the things I'm impressed with; I just swapped them out and swept/installed appropriate drivers. I was expecting to spend all afternoon "tweaking" like I did with my AMDs to get rid of HW errors and get a decent hashrate. But this is all I did:
cudaminer --algo=scrypt-jane:UTC -o stratum.blah.blah.com:port -u [username] -p [pass] -l (that's a lowercase L, not I which causes problems) t5x24
Also, I have the EVGA 750Ti OC version, non acx or whatever just one fan, and I overclocked it +30 gpu, +300 mem using evga precision. I tested +50 and +500 and it was stable, but warmer for only an extra 2-3 kh/s. I'm sure there is a lot of headroom for tweaking, especially the -l parameter and probably many others that I'm not aware of. But 20-25 kh/s at 65W TDP with little effort is pretty darn good imho.
EDIT: NM- Got it going but only getting 15kh/s with you settings. Need to play with it. Thanks
April 26, 2014, 11:02:14 PM
Just an FYI for anyone who may be interested, since there isn't a lot of current talk regarding "Green Team" miners:
I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
Care to share your 750Ti settings? I have 1 to play with.I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
Well, I haven't even really tweaked it yet. That's one of the things I'm impressed with; I just swapped them out and swept/installed appropriate drivers. I was expecting to spend all afternoon "tweaking" like I did with my AMDs to get rid of HW errors and get a decent hashrate. But this is all I did:
cudaminer --algo=scrypt-jane:UTC -o stratum.blah.blah.com:port -u [username] -p [pass] -l (that's a lowercase L, not I which causes problems) t5x24
Also, I have the EVGA 750Ti OC version, non acx or whatever just one fan, and I overclocked it +30 gpu, +300 mem using evga precision. I tested +50 and +500 and it was stable, but warmer for only an extra 2-3 kh/s. I'm sure there is a lot of headroom for tweaking, especially the -l parameter and probably many others that I'm not aware of. But 20-25 kh/s at 65W TDP with little effort is pretty darn good imho.
April 26, 2014, 10:50:09 PM
Just an FYI for anyone who may be interested, since there isn't a lot of current talk regarding "Green Team" miners:
I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
Care to share your 750Ti settings? I have 1 to play with. I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
April 26, 2014, 10:47:43 PM
Just an FYI for anyone who may be interested, since there isn't a lot of current talk regarding "Green Team" miners:
I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
I just replaced a pair of 7970's with a pair of GTX 750Ti's and I'm really liking the results. Just for comparison sake, I'm hashing the same on the 750Ti's as my 7870/270X cards: low to mid 20s kh/s. Both cards running along with a hdd array (rig doubles as a file server) on an old 65W athlon II under load and the Kill-a-watt says just under 200 watts at the wall. Not to mention the drop in temperature; I can actually stand to be in the same room with my rig again! Anyway, just wanted to share my results in case anyone else is looking into Maxwell based GPU's for mining UTC or anything else. So far it looks like decent performance at a great price and fantastic efficiency. And I don't think CUDAminer has even really been optimized for Maxwell and Compute 5.0, so who knows how things could look in a few months.
April 26, 2014, 10:46:50 PM
0.0013BTC===》0.01BTC
Jump to: