Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 410. (Read 946654 times)
March 07, 2014, 11:44:03 AM
H O L D your U T C
March 07, 2014, 11:42:35 AM
Or wolong tries to kill UTC cause of the friendship with PND? 
Time to grab some beer and watch the price rebounding.
Time to grab some beer and watch the price rebounding.
March 07, 2014, 11:37:42 AM
Guys, do you know of any diagnostic tool to check for any hardware defects on a gpu? I have 8 SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC. 2 Rigs and using only 1 setting for all, I get HW errors on one particular card. Even if I replace the card on a different slot or different rig. I assume it is a hardware defect. My local dealer does not understand CGMiner and mining stuff. If I could only run diagnostic tests on the GPU and show him the errors so he could replace the card. The GPU is totally useless as it only registers HW errors. If you have any idea on how I could be able to prove that the gpu is defective, kindly reply. Need all my gpus running to mine UTC. thanks.
Need some quick help.. Got 8gb of ram in both my mining rigs and I am getting some low ram errors on main computer that I surf the net on while mining.. Only running 2 280x at tc 16123 or w.e that new tc is..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
Try this for a 280x
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384
Should be 120-130 khs without hardware errors
I am not get HW errors.. as the thing mines just fine and stable.. getting errors of low ram while surfing the internet and mining.. with 8gb of ram I dont think I should be getting this problem no?
March 07, 2014, 11:37:02 AM
hahhahah utc price is after cryptsy add lower then before! Good job kiddis go plz and hang urself......
yes, thats true. but why 
March 07, 2014, 11:36:43 AM
The dumps on cryptsy aren't unexpected.
I think they are necessary to get some people out, but I also don't understand why they dump them so low down.
I think they are necessary to get some people out, but I also don't understand why they dump them so low down.
March 07, 2014, 11:31:45 AM
It's still early on cryptsy most coins trade 1 - 3 days on cryptsy before having any real upwards traction.
March 07, 2014, 11:30:49 AM
Hey everyone, I’m new here and I got a couple of questions. First of all I can’t seem to find an IRC for this coin or any kind of chat? Perhaps I’ve been looking in the wrong places, such as this thread but if anyone can help me that would be awesome. Secondly I read around here that with this special scrypt your kh/s can drop from 19-50% I can live with this but the problem is from the usual 420/440kh/s I get from my r9 270x its now down to a stunning 12~ kh/s! I’m using what I thought were the recommended settings and I have my intensity running at 12. If I put the intensity any higher than 12, I get a lot of HW’s. So I don’t know what I’m doing wrong here.
edit; the WU is only at a staggering 11.2/m
I forgot to mention this.
try this -w 256 -I 17 --thread-concurrency 20480 -g 1 edit; the WU is only at a staggering 11.2/m
I forgot to mention this.
March 07, 2014, 11:27:09 AM
Guys, do you know of any diagnostic tool to check for any hardware defects on a gpu? I have 8 SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC. 2 Rigs and using only 1 setting for all, I get HW errors on one particular card. Even if I replace the card on a different slot or different rig. I assume it is a hardware defect. My local dealer does not understand CGMiner and mining stuff. If I could only run diagnostic tests on the GPU and show him the errors so he could replace the card. The GPU is totally useless as it only registers HW errors. If you have any idea on how I could be able to prove that the gpu is defective, kindly reply. Need all my gpus running to mine UTC. thanks.
Need some quick help.. Got 8gb of ram in both my mining rigs and I am getting some low ram errors on main computer that I surf the net on while mining.. Only running 2 280x at tc 16123 or w.e that new tc is..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
Try this for a 280x
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384
Should be 120-130 khs without hardware errors
March 07, 2014, 11:24:21 AM
Guys, do you know of any diagnostic tool to check for any hardware defects on a gpu? I have 8 SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC. 2 Rigs and using only 1 setting for all, I get HW errors on one particular card. Even if I replace the card on a different slot or different rig. I assume it is a hardware defect. My local dealer does not understand CGMiner and mining stuff. If I could only run diagnostic tests on the GPU and show him the errors so he could replace the card. The GPU is totally useless as it only registers HW errors. If you have any idea on how I could be able to prove that the gpu is defective, kindly reply. Need all my gpus running to mine UTC. thanks.
OCCT - http://www.ocbase.com/
OCCT will show any errors IIRC.. or you could try www.majorgeeks.com/files/details/video_memory_stress_test.html
March 07, 2014, 11:24:07 AM
Need some quick help.. Got 8gb of ram in both my mining rigs and I am getting some low ram errors on main computer that I surf the net on while mining.. Only running 2 280x at tc 16123 or w.e that new tc is..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
I guess I can pick up another 8gb to make them run both on 16gb each.. but I thought 8gb was even a lot.. why the low ram errors?
Browser even crashed a few times recently..
March 07, 2014, 11:22:49 AM
why isnt UTC 5 dollar yet?
This is really good question. Seems like I'm gonna hold my bag for much longer time than I expected.
March 07, 2014, 11:22:03 AM
Hey everyone, I’m new here and I got a couple of questions. First of all I can’t seem to find an IRC for this coin or any kind of chat? Perhaps I’ve been looking in the wrong places, such as this thread but if anyone can help me that would be awesome. Secondly I read around here that with this special scrypt your kh/s can drop from 19-50% I can live with this but the problem is from the usual 420/440kh/s I get from my r9 270x its now down to a stunning 12~ kh/s! I’m using what I thought were the recommended settings and I have my intensity running at 12. If I put the intensity any higher than 12, I get a lot of HW’s. So I don’t know what I’m doing wrong here
There has been an IRC channel since day one, come join us at #ultracoin on webchat.freenode.net
I have no settings for a 270(x) but I'm sure someone can help u with it
March 07, 2014, 11:21:55 AM
hooooooooooold your UTC ...no more dump gays 
March 07, 2014, 11:21:27 AM
stupid dumpers
March 07, 2014, 11:20:22 AM
Hey everyone, I’m new here and I got a couple of questions. First of all I can’t seem to find an IRC for this coin or any kind of chat? Perhaps I’ve been looking in the wrong places, such as this thread but if anyone can help me that would be awesome. Secondly I read around here that with this special scrypt your kh/s can drop from 19-50% I can live with this but the problem is from the usual 420/440kh/s I get from my r9 270x its now down to a stunning 12~ kh/s! I’m using what I thought were the recommended settings and I have my intensity running at 12. If I put the intensity any higher than 12, I get a lot of HW’s. So I don’t know what I’m doing wrong here.
edit; the WU is only at a staggering 11.2/m
I forgot to mention this.
edit; the WU is only at a staggering 11.2/m
I forgot to mention this.
March 07, 2014, 11:18:51 AM
Guys, do you know of any diagnostic tool to check for any hardware defects on a gpu? I have 8 SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC. 2 Rigs and using only 1 setting for all, I get HW errors on one particular card. Even if I replace the card on a different slot or different rig. I assume it is a hardware defect. My local dealer does not understand CGMiner and mining stuff. If I could only run diagnostic tests on the GPU and show him the errors so he could replace the card. The GPU is totally useless as it only registers HW errors. If you have any idea on how I could be able to prove that the gpu is defective, kindly reply. Need all my gpus running to mine UTC. thanks.
March 07, 2014, 11:11:58 AM
March 07, 2014, 11:11:50 AM
with this dumper gays we have no chance to rocket
We don't need a rocket, we need a steady grow
Welcome to all the new UTC community members! You're joining a solid community here...
It's good to be on Cryptsy, but now we really need BTER to spread the UTC love to China
Please keep voting/replying for UTC:
https://bitcointalksearch.org/topic/annvote-new-coins-on-btercom-which-new-coin-should-bter-add-in-next-week-502363
And:
https://bitcointalk.org/index.php?topic=502900.40
It's good to be on Cryptsy, but now we really need BTER to spread the UTC love to China
Please keep voting/replying for UTC:
https://bitcointalksearch.org/topic/annvote-new-coins-on-btercom-which-new-coin-should-bter-add-in-next-week-502363
And:
https://bitcointalk.org/index.php?topic=502900.40
Is there a way to vote more than once?
Sadly, no
March 07, 2014, 11:09:44 AM
with this dumper gays we have no chance to rocket
Jump to: