[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 444.

Mikebeav3r

full member

Activity: 210

Merit: 100

Quote from: azerbaidjan on March 06, 2014, 08:01:37 AM

Quote from: dukas93 on March 06, 2014, 07:57:16 AM

Sry folks, dumper are everywhere, we r going to lose the 2xx very soon!

In case you did not remark UTC has been pumped since this morning.
This did not make much of a surprise to some members of the forum.
Therefore the timing at which to sell a bit of our holdings to repurchase them later was kind of obvious.
As a matter of fact this is not yet time to repurchase.

I transfered over a bit last night, and the rest of my "spare" BTC holdings this morning, got shot of a load of ALT's that were not doing anythign as well and started playing the buy / sell game, I doubt it is helping out the price that much, but am trying, plus the continual movement of money in and out of UTC will help I hope

azerbaidjan

member

Activity: 98

Merit: 10

Quote from: dukas93 on March 06, 2014, 07:57:16 AM

Sry folks, dumper are everywhere, we r going to lose the 2xx very soon!

In case you did not remark UTC has been pumped since this morning.
This did not make much of a surprise to some members of the forum.
Therefore the timing at which to sell a bit of our holdings to repurchase them later was kind of obvious.
As a matter of fact this is not yet time to repurchase.

pieterjanvh

hero member

Activity: 668

Merit: 500

Quote from: Degolep on March 06, 2014, 07:56:32 AM

there are no problems with 51% attack with this coin? Since 1 pool has such a big share http://bitgo.pw/utc/

Yes there are, luckily the owners of nitro pools are trusted community members, trying to make the best out of UTC.

Miesling

newbie

Activity: 28

Merit: 0

Quote from: NickPortland on March 06, 2014, 07:53:39 AM

Quote from: Miesling on March 06, 2014, 07:46:27 AM

Quote from: Karma.ITM on March 06, 2014, 07:37:27 AM

Quote from: xwebnetwork on March 06, 2014, 07:06:01 AM

I've got 6 rigs mining at the moment, all R9 280x's but I have a few more running into this issue:

<

This is the config I have been having luck with for the others:

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

That pulls around 130 per, easily. But for some reason I am encountering a buffer limit as depicted in that image. System has 8GB of Ram and can run fine at 8192 TC on G2 but obviously at a much lower hash. Thoughts? Again, they are Powercolor R9 280x's. Thanks!

What WU do you get with that 130kh/s?

I can only get 70kh/s and 70 WU with Intensity 11 and thread-con at 8192 on my 280x. Trying your settings results in 5kh/s and a really laggy PC.

Is there any chance you have 16GB of system ram? I only have 8GB

140-150kh/s -> WU 120-130kh/s on 280x.

Code:

-I 12 --gpu-engine 1100 --gpu-memclock 1500 -w 512 -g 2 --gpu-fan 90 --temp-target 85 --temp-overheat 80 --temp-cutoff 90 --thread-concurrency 16384

Sometimes ppl cant get more cuz their Temp-Target is to Low at 75, depending on setup cards get to 82C easy, so i set Temp Target to 85 to be sure its not an issue.
UTC Donations :-) : UisFWeEn7v6fxBaSmticGdeA6LY7SxdJSV

How much RAM you got though?

8GB for 3x 280x

dukas93

sr. member

Activity: 406

Merit: 250

Sry folks, dumper are everywhere, we r going to lose the 2xx very soon!

Degolep

full member

Activity: 210

Merit: 100

there are no problems with 51% attack with this coin? Since 1 pool has such a big share http://bitgo.pw/utc/

NickPortland

member

Activity: 98

Merit: 10

Quote from: Miesling on March 06, 2014, 07:46:27 AM

Quote from: Karma.ITM on March 06, 2014, 07:37:27 AM

Quote from: xwebnetwork on March 06, 2014, 07:06:01 AM

I've got 6 rigs mining at the moment, all R9 280x's but I have a few more running into this issue:

<

This is the config I have been having luck with for the others:

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

That pulls around 130 per, easily. But for some reason I am encountering a buffer limit as depicted in that image. System has 8GB of Ram and can run fine at 8192 TC on G2 but obviously at a much lower hash. Thoughts? Again, they are Powercolor R9 280x's. Thanks!

What WU do you get with that 130kh/s?

I can only get 70kh/s and 70 WU with Intensity 11 and thread-con at 8192 on my 280x. Trying your settings results in 5kh/s and a really laggy PC.

Is there any chance you have 16GB of system ram? I only have 8GB

140-150kh/s -> WU 120-130kh/s on 280x.

Code:

-I 12 --gpu-engine 1100 --gpu-memclock 1500 -w 512 -g 2 --gpu-fan 90 --temp-target 85 --temp-overheat 80 --temp-cutoff 90 --thread-concurrency 16384

Sometimes ppl cant get more cuz their Temp-Target is to Low at 75, depending on setup cards get to 82C easy, so i set Temp Target to 85 to be sure its not an issue.
UTC Donations :-) : UisFWeEn7v6fxBaSmticGdeA6LY7SxdJSV

How much RAM you got though?

Miesling

newbie

Activity: 28

Merit: 0

Quote from: Karma.ITM on March 06, 2014, 07:37:27 AM

Quote from: xwebnetwork on March 06, 2014, 07:06:01 AM

I've got 6 rigs mining at the moment, all R9 280x's but I have a few more running into this issue:

<

This is the config I have been having luck with for the others:

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

That pulls around 130 per, easily. But for some reason I am encountering a buffer limit as depicted in that image. System has 8GB of Ram and can run fine at 8192 TC on G2 but obviously at a much lower hash. Thoughts? Again, they are Powercolor R9 280x's. Thanks!

What WU do you get with that 130kh/s?

I can only get 70kh/s and 70 WU with Intensity 11 and thread-con at 8192 on my 280x. Trying your settings results in 5kh/s and a really laggy PC.

Is there any chance you have 16GB of system ram? I only have 8GB

140-150kh/s -> WU 120-130kh/s on 280x.

Code:

-I 12 --gpu-engine 1100 --gpu-memclock 1500 -w 512 -g 2 --gpu-fan 90 --temp-target 85 --temp-overheat 80 --temp-cutoff 90 --thread-concurrency 16384

Sometimes ppl cant get more cuz their Temp-Target is to Low at 75, depending on setup cards get to 82C easy, so i set Temp Target to 85 to be sure its not an issue.
UTC Donations :-) : UisFWeEn7v6fxBaSmticGdeA6LY7SxdJSV

bumface

hero member

Activity: 728

Merit: 501

Quote from: ?? on ??

Quote from: jetlee on March 06, 2014, 07:33:24 AM

@Bumface can you make an Irc Channel for this UTC community some things must be talk fast like "stop the dump

"

That would be awesome. If there is one already I'd like to know about it.

\\

there has been an irc from day 1, its #ultracoin

red5standingby

full member

Activity: 174

Merit: 100

thaitunhi1606

member

Activity: 111

Merit: 10

Haha, when i say "UTC' ll die, so it meaning UTC' ll PUMP, baby"

)) haha

dragonmike

hero member

Activity: 1274

Merit: 556

How important is RAM for mining UTC? I'm currently mining VTC with 4GB RAM without any problem on a 6x R9 280X BAMT rig...

Karma.ITM

full member

Activity: 126

Merit: 100

Quote from: xwebnetwork on March 06, 2014, 07:06:01 AM

I've got 6 rigs mining at the moment, all R9 280x's but I have a few more running into this issue:

<

This is the config I have been having luck with for the others:

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

That pulls around 130 per, easily. But for some reason I am encountering a buffer limit as depicted in that image. System has 8GB of Ram and can run fine at 8192 TC on G2 but obviously at a much lower hash. Thoughts? Again, they are Powercolor R9 280x's. Thanks!

What WU do you get with that 130kh/s?

I can only get 70kh/s and 70 WU with Intensity 11 and thread-con at 8192 on my 280x. Trying your settings results in 5kh/s and a really laggy PC.

Is there any chance you have 16GB of system ram? I only have 8GB

NickPortland

member

Activity: 98

Merit: 10

Utc mining is extremely profitable atm.

I mined 71 in 7 hours and half. (5a.m. GMT) on 3 mhs (scrypt).

Now estimate how much they're worth, and how much they will be soon?

jetlee

newbie

Activity: 56

Merit: 0

@Bumface can you make an Irc Channel for this UTC community some things must be talk fast like "stop the dump

"

pieterjanvh

hero member

Activity: 668

Merit: 500

Quote from: dcgirl on March 06, 2014, 07:24:53 AM

Quote from: pieterjanvh on March 06, 2014, 07:19:48 AM

Relax, there are panic sellers in every market. It's up to us to keep the support high

Btw, welcome to all the new UTC community members! You're joining a solid community here...

Please keep voting/replying for UTC:
https://bitcointalksearch.org/topic/annvote-new-coins-on-btercom-which-new-coin-should-bter-add-in-next-week-502363

Also:
https://bitcointalk.org/index.php?topic=502900.40

And ofcourse:
https://www.cryptsy.com/coinvotes/

And like our Facebook page for a chance to win 250UTC tomorrow! https://www.facebook.com/ultracoinnet

I'd suggest people not stare at the price as it fluctuates. The price will be maintained over time, if we maintain the volume. We need buyers and sellers to have that volume.

Exactly. We're at 270 BTC volume on MintPal right now, which still isn't nearly as much as we had on Crypto-Trade.
Keep spreading the word!

serdan

newbie

Activity: 53

Merit: 0

hahaha! pump dump pump dump. stabilizing the price for upcoming cryptsy

dcgirl

sr. member

Activity: 448

Merit: 250

Quote from: pieterjanvh on March 06, 2014, 07:19:48 AM

Relax, there are panic sellers in every market. It's up to us to keep the support high

Btw, welcome to all the new UTC community members! You're joining a solid community here...

Please keep voting/replying for UTC:
https://bitcointalksearch.org/topic/annvote-new-coins-on-btercom-which-new-coin-should-bter-add-in-next-week-502363

Also:
https://bitcointalk.org/index.php?topic=502900.40

And ofcourse:
https://www.cryptsy.com/coinvotes/

And like our Facebook page for a chance to win 250UTC tomorrow! https://www.facebook.com/ultracoinnet

I'd suggest people not stare at the price as it fluctuates. The price will be maintained over time, if we maintain the volume. We need buyers and sellers to have that volume.

$onmymint

newbie

Activity: 39

Merit: 0

Luckily I have not missed the boat, I jumped on board before it left but I saw something shining in the water so I tried to grab it but when I did I fell overboard Tongue

SxC

sr. member

Activity: 336

Merit: 250

Quote from: RunOrDie on March 06, 2014, 07:14:52 AM

i hope this panic sellers burn in the fucking hell soon

they wont burn in hell their tears will put out hells fire

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 444. (Read 946654 times)