Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 758. (Read 946654 times)

legendary
Activity: 1120
Merit: 1000
Mining at 3 pools with the GPU miner from the first page, but getting nothing.

Is anyone in the same situation?

Nothing, you mean ?

Do you receive share ?

If you see a lot of "HW" or "GPU errors" and no 'ACCEPTED SHARE", you are mining but all is invalid.

Try to lower intensity , 13 max.
Try to lower your threads-concurrency to 8000 / 8192


http://postimg.org/image/mqysnwx8z/

Doing something wrong here?

With nothing I meant getting nothing at pools:

Confirmed   0.000000
Unconfirmed   0.000000
sr. member
Activity: 348
Merit: 250
I thought it might be useful to add my experience of mining UTC so people new to the thread can make up their own opinion

Disclosure
To start I am not a stakeholder, developer or have any links to UTC. I just decided to mine a new coin on top of those I've done in the past (LTC, MEC, WDC, FST, DOGE & BTC) I also have investments in MEOW, NXT and a sharehold of Crypto-trade

I started following the thread seriously on Thursday when the pre-registration was originally planned for announcement. Unfortunately this pre-registration came and went but Bumface updated the thread to inform followers.

Some confusion occurred on Saturday, 1st February due to the timezone that the coin was to be launched. Again Bumface setup a new site and confimed release time of 07:00PM GMT. During the day updates came and went from Bumface about problems continuing with the launch of an official pool. The miner software was made availabe around about midday, I have a download timestamp of 12:29PM (so well before launch time)

Before launch, 07:00PM GMT, Bumface made an announcement that it was unlikely the official pool would be available at launch but the Wallet would be available as reported and miners could go solo until pools became available.

I'm not sure exactly when Bumface made the announcement in the thread but it was around 07:00PM GMT, I refreshed the official site and followed the link to Wallets http://www.ultracoin.net/wallet.html Windows was available and I'm pretty sure so where clients for Mac, Linux and the source on Github. The Windows wallet downloaded from mega.co.nz I downloaded and have a timestamp of 07:06PM for the file.

Now I've never solo mined before and information was a bit hard to come by, especially considering this is Scrypt-Jane rather than Scrypt which is much more common for alt-coins. I did manage to figure out from posts in the thread the rpc conf settings for the wallet and the miner. I started to solo mine around 19:30 to 20:00. I was getting what I thought were "errors" but on reading the web were not and common when solo mining. I learnt, but should have found out earlier, how to solo mine for the first time. Solo-mining is all or nothing you find a block or you don't find a block so no accepts or rejects like you would get with a pool (something else I learnt). Even if you find a block it could still be orphaned which again is greater risk when solo mining because you could find a block just after someone else but before the network can confirm.

Soon after launching the wallet a couple of pools kept appearing, but also some "false" pool URLs were being posted. I signed up to utc.pool.pm and started pool mining successfully, it then crashed after a few minutes. The owner was posting in the thread so we knew what was going on. Shortly later another pool claimed stability, ultra.nitro.org so I signed up and mined with them. I'm guessing that was about 10:00PM, I then mined all night long although noted the hash rate was around 540 as opposed to scrypt mining on the same rig of about 570.

This morning it appeared lots had signed up to nitro.org and I'm accumulated 100 coins and received a pay-out to my wallet. The forums continued to indicate other pools becoming available and the owner of ultra.Leetpools.com was giving lots of helpful miner config info so I decided to sign-up and join this smaller pool as it seemed more friendly. I've now mined a further 50 UTC on ultra.leetpools.com with a four HIS 7970 card rig which is achieveing a stable hash of 540 per card or around 2,100 in total.

Observations
  • The launch didn't go quite as smoothly as expected but this was mainly due to the official pool not becoming available
  • Information provided by Bumface was accurate, timely and honest
  • Every alt-coin has its committed followers and those who want to kill it
  • The language some people were using on the threads was intolerable and unacceptable, I thought more of the crypto-community
  • Lots of people were lazy and obviously hadn't read the first page of the thread or any subsequent posts as the same questions were being asked over and over again on the thread
  • Some posters were posting mis-information (some genuine mistakes, some deliberate) and some "pools" were scams
  • Ultracoin was pre-mined, it states this on page one, it had an IPO for a number of stakeholders, it states this on page one. The IPO appears to have been oversubcribed and many people missed out
  • No-one knows for sure if the coin will make any money on 7th February, the 8th Feb. the summer, next year or ever. That is why all crypto's are high risk. But with high risk you also get high return if it proves to be successful

I hope this maybe useful as a balanced observation of my own experience and help others to make up their own minds about this coin

KC
legendary
Activity: 2435
Merit: 1642
Tried mining with 3x 290s. All of them have their memclock locked at 150 mhz which gives me like 14khs each. I'm unable to change this using either the miner or afterburner. Anyone else having the same issue?
Are you deleting the .bin file in the ultracoin-miner folder once you've changed the settings in the cgminer.conf file (also in that folder)?

Thanks for the reply! Yes I've been deleting the bin file. Also I'm not using a cgminer.conf file, just adding settings to the command line. The most surprising thing really is that even afterburner doesn't seem to be able to change the gpu settings while it is running.

Once Id got cgminer to start I made it write a config file (which it drops in the ultracoin-miner folder) and edited that. Not sure if thats any use to you?
member
Activity: 78
Merit: 10
Mining at 3 pools with the GPU miner from the first page, but getting nothing.

Is anyone in the same situation?

Nothing, you mean ?

Do you receive share ?

If you see a lot of "HW" or "GPU errors" and no 'ACCEPTED SHARE", you are mining but all is invalid.

Try to lower intensity , 13 max.
Try to lower your threads-concurrency to 8000 / 8192
hero member
Activity: 728
Merit: 501
Mining at 3 pools with the GPU miner from the first page, but getting nothing.

Is anyone in the same situation?

it takes a while to see the unconfirmed coins in the pool balance, some are faster with this then others, im now testing pool number 4
sr. member
Activity: 294
Merit: 250
You could check for yourself now.

Try running just 3 cards and use task manager to see how much RAM is being used.

LOL thanks !!! I'm not a windows user, didn't even think of that !

Well it seems that I'm using only 1,4/1.6 gb of memory.... So not a ram problem.

Btw, it's a 100% dedicated to mining machine, bought, mounted and used only for mining.

I'm surprised it's using so little memory.

I guess you could check both your RAM sticks make sure that they both work ok on there own. Not sure after that, maybe check back further in the thread. I seem to remember someone saying they could only get 4 cards out of 5 working I may be getting confused with another thread though.
legendary
Activity: 1120
Merit: 1000
Mining at 3 pools with the GPU miner from the first page, but getting nothing.

Is anyone in the same situation?
sr. member
Activity: 392
Merit: 250
Tried mining with 3x 290s. All of them have their memclock locked at 150 mhz which gives me like 14khs each. I'm unable to change this using either the miner or afterburner. Anyone else having the same issue?
Are you deleting the .bin file in the ultracoin-miner folder once you've changed the settings in the cgminer.conf file (also in that folder)?

Thanks for the reply! Yes I've been deleting the bin file. Also I'm not using a cgminer.conf file, just adding settings to the command line. The most surprising thing really is that even afterburner doesn't seem to be able to change the gpu settings while it is running.
sr. member
Activity: 1193
Merit: 251
You could check for yourself now.

Try running just 3 cards and use task manager to see how much RAM is being used.

LOL thanks !!! I'm not a windows user, didn't even think of that !

Well it seems that I'm using only 1,4/1.6 gb of memory.... So not a ram problem.

Btw, it's a 100% dedicated to mining machine, bought, mounted and used only for mining.
newbie
Activity: 6
Merit: 0
https://i.imgur.com/A1Bto6v.jpg

the reason i started mining this coin... ULTRAAAA ULTRAAAA ULTRAAAA ULTRAAA combo

http://www.youtube.com/watch?v=X4Vtg33evno
fond memories. Ultraaaaaaa Ultraaaaa Ultraaaaaa should be the UTC official slogan - its going on my pool!

+/u/dogetipbot 50000 doge verify
full member
Activity: 124
Merit: 100
installed cpu miner. typed setgenerate true. nothing happened.
newbie
Activity: 56
Merit: 0
Missed the bid ...
Waiting ...
Download wallet and miner ...
Power out - mainline down - generator line confirmed failed
Power back
Linux Wallet libminiupnpc.so.9 issue
Windows Wallet not working on 64 bit machine
Power out - generator line still down
Sleeping ...
Waking ...
Power back - generator line fixed
Miner - GPU HD7790 - running on Windows 64 bit will not synch with Wallet on Windows 32 bit machine
Not mining ...
Pools go live - Signed up to ultra.leetpools.com
Wallet configuration updated to correct rpcallowip\rpcconnect values
Solo mining now working but seems to be a bit late for that
Back to ultra.leetpools.com
Mining ....
Hash rate ~170KH/s ... +3 UTC ...

Relatively frustration free. Just not sure of the relative rewards for mining UTC.
sr. member
Activity: 1193
Merit: 251
You could check for yourself now.

Try running just 3 cards and use task manager to see how much RAM is being used.

LOL thanks !!! I'm not a windows user, didn't even think of that !
legendary
Activity: 2435
Merit: 1642
Tried mining with 3x 290s. All of them have their memclock locked at 150 mhz which gives me like 14khs each. I'm unable to change this using either the miner or afterburner. Anyone else having the same issue?
Are you deleting the .bin file in the ultracoin-miner folder once you've changed the settings in the cgminer.conf file (also in that folder)?
sr. member
Activity: 294
Merit: 250
You could check for yourself now.

Try running just 3 cards and use task manager to see how much RAM is being used.
full member
Activity: 182
Merit: 100
MaGNeT: you simply have no clue how much effort and work is required to make a coin.IF we were a scamcoin, we would not have chosen scrypt JANE, since its way more difficult tu handle.....

Things didnt go as planned and there were no pools at launch,how do you think that made me feel after saying they would be there??? The devs really worked as hard as they could,but if you have a problem in the code you need to fix it, it does not magicly fix itsself.....

And now just 1 day later ,there seem to be about 6 working pools,so there is no disaster what so ever....If you had frustration, my frustration was 10 times bigger,but we dont give up, we dont quit.

This is a brand new coin and problems may arise in the initial starting fase,but we are working towards a long term stability, and this is also one of the reasons why scrypt jane was chosen.......

you may not like this coin together with others but we have a great community around UTC and the evidence is in the positive feedback i recieve in various channels,and is also visible in the difficulty.....

We are still in a pre- exchange fase right now.We are veryy happy crypto trade will take UTC and we are also talking with multiple other exchanges,so its WAY to early to judge us...

Please have patience and we will show the world what we can do


When the coins hits an exchange at feb 7, there will be ~3,000,000 UTC in circulation.

2,000,000 of those 3,000,000 UTC will be hold by premine-/"stakeholders".

People have to realize that.


point 1 :your grabbin a 3 million figure out of thin air
point 2: stakeholders have 1,6 million total , not 2 million

point 1 : no, it's a calculation based on the current blockcount, block generation speed and coins per block. It's easy to calculate.
point 2 : it doesn't matter where the 2 million coins are, could be premine- / stakeholder: fact is, 66% of all coins will be in the hands of premine0 / stakeholders when they hit an exchange.


Stakeholder have been asked to sell responsible in a new market, and asking is all i can do , since they become the owners, they are free to do what they please with those coins, and we hope they see the long term potential and not dump it al on day one......

Well, the word is out... There will be 3,000,000 UTC in circulation at feb 7 and 2,000,000 UTC can and will be dumped at everyone.... and that after you made 80BTC on the pre-sale... I have to hand it to you, you are a "businessman".

The current miners are only getting some pocketchange to make sure there's some support for the coin and to make sure you can get your transactions to the exchange at launch.

Potential? Yeah... it's killed...

You don't know what you talking about , nothing that you have said is based on fact.
Here are some facts -
I am a stake holder
I know other stake holders
We will not be dumping
We will not be selling cheap

FACTS

Did you received your coins? Show transaction ID. You was registered yetreday, I think you are a scammer or dev alt.
sr. member
Activity: 1193
Merit: 251
Hey Guys !

I'm looking for help with my weird problem (I can't find any answer anywhere, please help !)

One of my cards is not working when mining ultracoin, it's either "sick" or "dead" or just mining at 0hs/sec.

When I relaunch the miner, another card from the rig is out, always one random card is out of four cards is out.

The best part : mining any other scrypt (not jane) coin : everything works perfectly.

Is there any technical aspect that I'm missing here ?

Thanks a lot for your insight, and help !!!




5 UTC BOUNTY GUYS !!!!!   Think about it, in a year, it will worth more than couple grands $$$$$$

Try to lower the intensity?

I did try it, tried to lower mem and core too. thank you for trying to help

you are probably drawing too much power.. what are:
Your cards
your mem speed (and stock?)
your core speed, (and stock?)
your powersuply

I don't think it will be power if everything works okay using normal cgminer. My cards are using about 40w less per card mining scrypt-jane

Well thank you all for trying to help.

To answer :

-My cards are on stock voltage. 4 sapphire 7950 dualx 3gb with boost
- psu : 2 corsair tx850m connected via add2psu. powered risers.
- Engine clock : 1082. Mem : 1250. ===> I tried to reduce those values a little first, then stock, then under stock, no effect
- Ram : 4gb. (that's the only thing I can't change now that could maybe be an issue)

reminder : Every time I launch the miner it's a different card that is "off" or "dead" or "sick". And the whole miner works totally normally with any other scrypt coin.

Looking forward to have a solution that works, bounty is still on !
-

I would guess at the RAM scrypt-jane uses a lot of RAM someone mentioned it an earlier post

I'm using the for windows of the official thread post, launched by the.bat. I just copied and pasted the config and bat from official thread.
I did add the intensity (tried to reduce it) and the thread concurrency at 21712
 The miner is on windows 7 64bits.

Well as for the ram thing, I'm gonna buy 4 gb more on monday, if it works, I won't forget to reach you for the bounty Smiley
member
Activity: 78
Merit: 10
OMG i just figured out ! after years, I just undesrtand the secret of trading !!
You just have to ask with kindness "please, don't sell cheap"

I lost so many years! I'm depressed
member
Activity: 100
Merit: 10
the truth is when it goes to an exchange it will go up. that is true. it will go up because people are speculating on what the price will be in the future. but what is also true is after it goes up everyone will send their coins to the exchange and sell them eventually people will be saying i am losing money each second and they will say to them selfs they bought at 0.00005 so if they sell they can still make profit then they sell and the price is now at breaking even, they sell all theirs so they dont lose then it goes down to a price everyone wants to buy at the buyers will overcome the sellers and it will go up and keep going up going up and down during the uptrend and as the coins become spread across alot of people it will be a very nice slow uptrend. once it reaches the point where the speculators in the begining(the peak of when it was at the exchange) bought it will go down for a few days because those people will want to sell their coins. once it breaks through that point it will go up alot eventually reaching where ppc is now.

this is what will happen . good luck guys Smiley

ive seen this happen many times. ltc, ppc, doge and alot of other great coins.
hope you understand the reason this things will happen.

Nice, reasoned analysis. +1
sr. member
Activity: 392
Merit: 250
Tried mining with 3x 290s. All of them have their memclock locked at 150 mhz which gives me like 14khs each. I'm unable to change this using either the miner or afterburner. Anyone else having the same issue?
Jump to: