Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 765. (Read 946654 times)

newbie
Activity: 10
Merit: 0
CudaMiner

After trying many different ways out last night I managed to get CudaMiner to start mining me some Ultracoin Cheesy I grabbed a fresh Ubuntu 12.04, installed Cuda 5.5, cloned CudaMiner from Git (and this was crucial as Ultracoin settings were added in the code only yesterday! https://github.com/cbuchner1/CudaMiner/commit/ec3f4d3acbcb70b17049a1d9d8d4dc3b936c220d) hassled around with the settings a bit and it was working smoothly!

These are my steps:

wget http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1204/x86_64/cuda-repo-ubuntu1204_5.5-0_amd64.deb
apt-get install gcc git rsync libghc-curl-dev automake
dpkg -i cuda-repo-ubuntu1204_5.5-0_amd64.deb
apt-get update
apt-get install cuda
export PATH="/usr/local/cuda-5.5/bin:$PATH"
export LD_LIBRARY_PATH="/usr/local/cuda-5.5/lib64:/usr/local/cuda-5.5/lib"
git clone https://github.com/cbuchner1/CudaMiner
cd CudaMiner
./autogen.sh
./configure
PATH=/usr/local/cuda-5.5/bin:$PATH make

Then run:
LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64 ./cudaminer --algo=scrypt-jane:UltraCoin -o [pool-info] -O username:password -q -l 70x4 -H 2 -C 1 -S &
tail -f /var/log/syslog #miner output is logged to syslog

-l was set to 70x4, haven't been finetuning that one yet but it was one of few that actually worked. Any advise is more than welcome!
-H is set to 2 as 0 or 1 would result in 1/3 hash rate compared to 2

At the time I was done last night the eyes closed automatically so I haven't had any time for fine-tuning (or doing something about the library paths for that matter).

CudaMiner has a separate thread: https://bitcointalksearch.org/topic/ann-cudaminer-ccminer-cuda-based-mining-applications-windowslinuxmacosx-167229
newbie
Activity: 28
Merit: 0
I will sell 1000 UTC for 0.50 BTC.. I can sell it on eBay if you prefer for sense of security. my account has been with eBay for over 5 years 100% positive feedback. Accept payment in btc or bank transfer of equivalent value. If anyone is interested pm me and ill create a listing.. if anyone wants to see evidence of my wallet balance I can send pics.. I am one of the original stake holders

alternatively if your interested you send u can send small payments ie. 0.05 btc then i release 100 coins etc and this process can be repeated x10 to so that eventually i get 0.5 BTC and you get 1000 UTC, i will sell smaller volumes also pm me
member
Activity: 75
Merit: 10
Coinsnipers ULTRA Coin Pool is up

ultra.coinsnipers.com!

member
Activity: 84
Merit: 10


http://ULTRA.Leetpools.NET

http://ultra.leetpools.com (WILL WORK SHORTLY IT IS PROPAGATING)

(We had to move the .com currently propogating, please access the site using the .net!!!)


We are sorry for the inconvenience, all pool functions and stratum are functioning, please update!!!

IS OPEN AND HUNGRY FOR HASHES!!


1% PROP VARDIFF!!!

Fully functional. No email confirmations required! Just register and start hashing!!!

Come chill in IRC #Leetpools on quakenet

@ 90MHS 100mhs 120Mhs 140mhs 150mhs AND GROWING!!


1.337 UTC BLOCK FINDER REWARDS ENABLED FOR NEXT 300++ BLOCKS!!! COME HASH!

Promo is over! Thanks everyone!

Mine like a Boss.

CHECK OUT OUR FRESH NEW LOOK! :DDDD
newbie
Activity: 4
Merit: 0
Hey man, I posted a 280x config that some of the guys here on the forum claimed worked for them as well. Not sure for the 290 though. Give this one a shot on your 280x:

ultracoinminer -o ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

Legend.

This got me 567 per 280X instead of the 120 I was getting before :p
newbie
Activity: 28
Merit: 0
watch guys when this hits trade u will know what im talking about, stop crying if you could not get hold of any
newbie
Activity: 42
Merit: 0
this coin has no promise at all, wtf are you talking about?Huh your just saying that because your mining this crap ass coin whahaha!!!1

+1

the launch was a fail
no wallet or mining tools for macOS + linux
IPO highly over evaluated

http://imageshack.com/a/img706/6410/ye9d.png

hero member
Activity: 784
Merit: 503
Bitcoin King BTC
this coin has no promise at all, wtf are you talking about?Huh your just saying that because your mining this crap ass coin whahaha!!!1
newbie
Activity: 28
Merit: 0
I will sell 1000 UTC for 0.50 BTC.. I can sell it on eBay if you prefer for sense of security. my account has been with eBay for over 5 years 100% positive feedback. Accept payment in btc or bank transfer of equivalent value. If anyone is interested pm me and ill create a listing.. if anyone wants to see evidence of my wallet balance I can send pics.. I am one of the original stake holders

When this hits the trade it will probably start x10 that amount. This coin has a lot of promise and huge interest. Lets all get rich $$$$$$$$$$. Its not like doge where theres billions there will only be 100mill coins
member
Activity: 84
Merit: 10
HELLO EVERYBODY, ARE YOU TIRED OF TRYING Huh Huh Huh

I spent many hours to try to understand how to MINE UTC on Pools or even Solo...

Finaly I was able to make a little but WORKING Bundle with all Tools and Pools that I used and tested and YES its really working now  Wink

First of all I would say a BIG THANKS to everyones that inspired me as my sources Cheesy

As I said it is just a little bundle, I'm not the original DeV of those tools, my job was only to understand how they work and how to add personnalized settings for my Hardware Configuration.

The HARDWARE that I used to do it is working under Windows 7 x64 (Properly configured as a RIG) + one Graphic Card ASUS ATI HD 6990 Dual-GPU (You will have to personnalize settings for your Graphic Cards inside the embeded BAT files)

Remember that my Graphic Card is a Dual-GPU so you have to take a special attention to this parameter (-g 2) inside embeded BAT files and to set it to (-g 1) if your Graphic Card is Single-GPU.


Here you will find all needed informations to be able to start mining...


Working Pools:   (Just make your choise)

- ultra.nitro.org:3337   "or"   72.44.79.44:3337
- utc.greekpool.eu:3337
- ultra.leetpools.com:3333
- utc.idcray.com:10001
- pickaxe.pool.pm:3306
- ultra.coinsnipers.com:3339



Working Tools:   (Credits to original DeVs + My custom BAT and ultracoin.conf files)

Ultracoin-Miner : https://mega.co.nz/#!GYphGA6D!_GoVBdbC__FgLd5t7aDsLpU-X7z-Oj4OBY-pJ9bVurc
CGMiner SCRYPT-JANE modified eddition : https://mega.co.nz/#!KdYn1KbR!kITjcvAhJdKHeakERHzj9kcd-fOYvCJiY06B5DtavdM




For the Pool-Mining part everything is working well, but same as many other peoples for the Solo-Mining part I wasn't able to get something else than A:0 R:0 in Ultracoin-Miner and CGMiner Interfaces even if I got some Best share  Sad      HELP WOULD BE REALLY APPRECIATED

The next step for me now is to be able to make a little WORKING Bundle for the LINUX Tools especialy for BAMT or other Dedicated Mining Releases

For that part, HELP WOULD BE REALLY REALLY MUCH MORE APPRECIATED because I know it is not easy to compile the LINUX Sources and make them working : https://mega.co.nz/#!p0kkRbbR!i5DqBPRL4WtDFU0d9uTlILwZxQui3EWHaJgaYcPA8L8



I hope that you will enjoy my post and if you can Reply informations about my mistakes or some better optimisations, PLEASE DO NOT HESITATE  Wink




See you soon for the next step with the LINUX PART.......


I will test this out!!!
full member
Activity: 213
Merit: 100
WTS 70 UTC @ 0.03 BTC, PM me. I also accept LTC or WDC.
newbie
Activity: 3
Merit: 0
HELLO EVERYBODY, ARE YOU TIRED OF TRYING Huh Huh Huh

I spent many hours to try to understand how to MINE UTC on Pools or even Solo...

Finaly I was able to make a little but WORKING Bundle with all Tools and Pools that I used and tested and YES its really working now  Wink

First of all I would say a BIG THANKS to everyones that inspired me as my sources Cheesy

As I said it is just a little bundle, I'm not the original DeV of those tools, my job was only to understand how they work and how to add personnalized settings for my Hardware Configuration.

The HARDWARE that I used to do it is working under Windows 7 x64 (Properly configured as a RIG) + one Graphic Card ASUS ATI HD 6990 Dual-GPU (You will have to personnalize settings for your Graphic Cards inside the embeded BAT files)

Remember that my Graphic Card is a Dual-GPU so you have to take a special attention to this parameter (-g 2) inside embeded BAT files and to set it to (-g 1) if your Graphic Card is Single-GPU.


Here you will find all needed informations to be able to start mining...


Working Pools:   (Just make your choise)

- ultra.nitro.org:3337   "or"   72.44.79.44:3337
- utc.greekpool.eu:3337
- ultra.leetpools.com:3333
- utc.idcray.com:10001
- pickaxe.pool.pm:3306
- ultra.coinsnipers.com:3339



Working Tools:   (Credits to original DeVs + My custom BAT and ultracoin.conf files)

Ultracoin-Miner : https://mega.co.nz/#!GYphGA6D!_GoVBdbC__FgLd5t7aDsLpU-X7z-Oj4OBY-pJ9bVurc
CGMiner SCRYPT-JANE modified eddition : https://mega.co.nz/#!KdYn1KbR!kITjcvAhJdKHeakERHzj9kcd-fOYvCJiY06B5DtavdM




For the Pool-Mining part everything is working well, but same as many other peoples for the Solo-Mining part I wasn't able to get something else than A:0 R:0 in Ultracoin-Miner and CGMiner Interfaces even if I got some Best share  Sad      HELP WOULD BE REALLY APPRECIATED

The next step for me now is to be able to make a little WORKING Bundle for the LINUX Tools especialy for BAMT or other Dedicated Mining Releases

For that part, HELP WOULD BE REALLY REALLY MUCH MORE APPRECIATED because I know it is not easy to compile the LINUX Sources and make them working : https://mega.co.nz/#!p0kkRbbR!i5DqBPRL4WtDFU0d9uTlILwZxQui3EWHaJgaYcPA8L8



I hope that you will enjoy my post and if you can Reply informations about my mistakes or some better optimisations, PLEASE DO NOT HESITATE  Wink




See you soon for the next step with the LINUX PART.......






Here is my UTC wallet address if someone is nice enough to send me a small DONATION Wink   :
   UcdbHufcEzHqevDwqRNYXze8pRVcx5ueio
legendary
Activity: 1526
Merit: 1002
Waves | 3PHMaGNeTJfqFfD4xuctgKdoxLX188QM8na
This post has been deleted 2 times by the OP!

Stop this scamcoin from being listed on Crypto-Trade exchange!
They have pre-mined 2,000,000 UTC and will dump them at you at feb 7!

Post here to make sure UltraCoin doesn't get listed on this exchange!
https://crypto-trade.com/news/47


@OP: you can delete this post, I'll just put it back: I receive a mail everytime you delete it and I just copy-past it from notepad and post it again.
hero member
Activity: 784
Merit: 503
Bitcoin King BTC
you people are actually mining this crapp ass scam coin lol ??
full member
Activity: 133
Merit: 100
using 6970atm and only getting 220khs :s ?  normaly i have 460 khs with these setting i know Jane give lower hashrates but this is like 50% less my r9 280x's are going 570khs  instead of 760khs  which looks more reasonable.
hero member
Activity: 826
Merit: 1000
how to know how many ultracoins there are currently

2115 Block solved = > 2115 * 50 = 105750 UTC
member
Activity: 76
Merit: 10
how to know how many ultracoins there are currently

You can type getinfo in the wallet
full member
Activity: 182
Merit: 100
WTS 150 UTC. Pm offers.
newbie
Activity: 18
Merit: 0
126.887433 UTC for sale. 0,25 BTC only !
member
Activity: 84
Merit: 10
Why 7970 has low hashrate (450khs) with this config?
maybe you need a new config or is just the videocard Brand.If is not Asus-Gigabyte or Sapphire- is not worth buying(my opinion)
I had 2x7970 Sapphire. Dogecoin mine at 720Khs, but Ultracoin mine at 410khs.

Ultracoin uses Scrypt-Jane which is different than Scrypt.
I know, but how any guys get 650khs with single 270x?

My 270s get ~ 400 I dont know what they are doing.
I can only get 355 max on my 270Xs. Whats your settings?

ultracoinminer -o ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 19 -g 1 -w 256 --temp-cutoff 90 --temp-overheat 85 --queue 0 --no-submit-stale --scan-time 1

I have them heavily overclocked in afterburner as well. 1100 core clock and 1500 memory. I strongly recommend not overclocking as much as me. (I live in a very cold climate) Give those settings a shot! Cheesy
Jump to: