Now 150 MH/s at http://utc.greekpool.eu/
You can also follow @greekpooleu on twitter
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 771. (Read 946654 times)
February 01, 2014, 11:55:52 PM
February 01, 2014, 11:49:34 PM
WTS 1000 UTC for 3 BTC !!! 
February 01, 2014, 11:40:06 PM
Well, wish I could figure out what is wrong with my solo mining. I joined the nitro pool and found my first block pretty fast. Running about 1000 kh/s didn't find one all day.... Saw the blocks being found, the changing difficulty etc all in cgminer just never found a block with my setup parameters so I am guessing I was doing something wrong.
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
edit *** we didn't need to start the qt wallet with the -server command like other coins did we? ****
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
edit *** we didn't need to start the qt wallet with the -server command like other coins did we? ****
@ ultra.nitro.org we deliver your shares quickly, no holdup. Other pool owners would like to make you believe it's just luck. I don't see how trying other pools would help with your solo settings. But all is well Glad you are finding blocks on our pool. February 01, 2014, 11:31:48 PM
same msg to me also.
buy utc 10k=1btc
send btc first
thx Grin
buy utc 10k=1btc
send btc first
thx Grin
February 01, 2014, 11:22:00 PM
https://i.imgur.com/D2lPaHu.png
Found 1 block solo-mining @ 650 k/hash, found 1 block for ultra.nitro.
Pissed, shoulda kept solo mining haha
Found 1 block solo-mining @ 650 k/hash, found 1 block for ultra.nitro.
Pissed, shoulda kept solo mining haha
February 01, 2014, 11:20:37 PM
New users be careful. My one post attracted the attention of a probable scammer named chenjsi who wanted me to send me BTC first for some UTC. He sent me an unsolicited PM. Yeah right, send my BTC to some 3 week noob with no history.... where's Tomatocage 
I too received the PM. Here is the message.
Quote
buy utc 10k=1btc
send btc first
thx Grin
send btc first
thx Grin
Send BTC first?
February 01, 2014, 11:19:49 PM
I just found the original promo site for Ultra coin. The first review is spot on!
http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html
UltraCon... "The most Versatile gimmick coin on the market"
http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html
UltraCon... "The most Versatile gimmick coin on the market"
ROFL
February 01, 2014, 11:16:49 PM
Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com
Ok thanks appreciate the input... Will definitely check out your pool as I like to have at least 2 when i pool mine..
[/quote]
Feel free to ask questions through our support page or our threads. We are always around.
Thank you!
February 01, 2014, 11:14:56 PM
Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com
[/quote]
Ok thanks appreciate the input... Will definitely check out your pool as I like to have at least 2 when i pool mine..
February 01, 2014, 11:12:52 PM
Well, wish I could figure out what is wrong with my solo mining. I joined the nitro pool and found my first block pretty fast. Running about 1000 kh/s didn't find one all day.... Saw the blocks being found, the changing difficulty etc all in cgminer just never found a block with my setup parameters so I am guessing I was doing something wrong.
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com
February 01, 2014, 11:11:19 PM
Well, wish I could figure out what is wrong with my solo mining. I joined the nitro pool and found my first block pretty fast. Running about 1000 kh/s didn't find one all day.... Saw the blocks being found, the changing difficulty etc all in cgminer just never found a block with my setup parameters so I am guessing I was doing something wrong.
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
edit *** we didn't need to start the qt wallet with the -server command like other coins did we? ****
Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.
When I was attempting to solo mine my bat files would be similar to this ( changed them many times )
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1
And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this
rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.
( I just xxxxxxx'd out the info but yes the user/pass was correct )
I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single... Wasn't too worried about getting it as efficient as possible as I was to just getting it to work and accept one block to know I had it setup right. So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...
If anyone can point out where I went wrong would be appreciated. ( Would love to know for going forward on other solo mining coins as well, I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )
Thanks in advance...
edit *** we didn't need to start the qt wallet with the -server command like other coins did we? ****
February 01, 2014, 11:09:46 PM
http://ULTRA.Leetpools.NET
http://ultra.leetpools.com (WILL WORK SHORTLY IT IS PROPAGATING)
(We had to move the .com currently propogating, please access the site using the .net!!!)
We are sorry for the inconvenience, all pool functions and stratum are functioning, please update!!!
IS OPEN AND HUNGRY FOR HASHES!!
1% PROP VARDIFF!!!
Fully functional. No email confirmations required! Just register and start hashing!!!
Come chill in IRC #Leetpools on quakenet
@
Promo is over! Thanks everyone!
Mine like a Boss.
CHECK OUT OUR FRESH NEW LOOK! :DDDD
February 01, 2014, 11:06:23 PM
I just found the original promo site for Ultra coin. The first review is spot on!
http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html
UltraCon... "The most Versatile gimmick coin on the market"
http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html
UltraCon... "The most Versatile gimmick coin on the market"
February 01, 2014, 10:58:11 PM
New users be careful. My one post attracted the attention of a probable scammer named chenjsi who wanted me to send me BTC first for some UTC. He sent me an unsolicited PM. Yeah right, send my BTC to some 3 week noob with no history.... where's Tomatocage
February 01, 2014, 10:56:34 PM
ultra.nitro.org Pool is open
Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
this pool is working for me, looks stable, i haven't taken a payout yetUltracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
Just got a payout of 9UTC
February 01, 2014, 10:52:16 PM
ultra.nitro.org Pool is open
Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
this pool is working for me, looks stable, i haven't taken a payout yet Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
February 01, 2014, 10:46:26 PM
ultra.nitro.org Pool is open
Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.
February 01, 2014, 10:43:57 PM
So can anyone explain why hash rates are so low? I always get much better hash rates with Scrypt-jane.
Bumface is charging .5 BTC for his own closed source super-fast miner, seems a little shady but hey, his coin his rules, nothing you can do. PM him for details.
LOL. Ultimate ultra scam coin.
Pay for premine.
Pay for pool access.
Pay for fast miner.
Nomen est omen!
These trollbox mods have no class.
If it barks like a dog it IS a dog
could some one leak the miner. pleasee!!
Our pool has a link to the miner.. http://ultra.leetpools.com/index.php?page=gettingstarted
Its also available on the first post...
there seems to be a "super faster" one
February 01, 2014, 10:41:12 PM
--scrypt-jane does indeed need more RAM.
Really? My old munter miner pc is running a 5970 @ 480Kh/s on a celeron with only 1.08GB of DDR2 ram being used. Funny dat
February 01, 2014, 10:35:15 PM
New Pool located in the US - http://ultra.coinsnipers.com
Jump to: