[ANN] Bi•Fury | 5 GH/s USB Miner [IN STOCK!] {SALE !} - page 2.

Bearclaw

newbie

Activity: 52

Merit: 0

Quote from: rallasnackbar on March 15, 2014, 11:19:17 AM

Is it possible to overclock them in some way?? Running mine for some time now, and with the cooling i got, they are steady at 33C so i wonder if i could get more ghash of them.

Yes it is possible to overclock them. I believe cgminer automatically tries to overclock them up to the thermal limit of their firmware. With bfgminer you can set the oscillator bits from the "M"anage devices menu and selecting your Bi•Fury and hitting "O"scillator bits to change the setting.

rallasnackbar

full member

Activity: 196

Merit: 100

Is it possible to overclock them in some way?? Running mine for some time now, and with the cooling i got, they are steady at 33C so i wonder if i could get more ghash of them.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Yes it works with SHA-256 coins.
It will not do scrypt coins though.

Quote from: Felipeo on March 09, 2014, 01:53:15 PM

Quote from: goldfuture on February 23, 2014, 04:56:10 PM

Can I mine with bi fury other currency like digitalcoin or just bitcoin?

thank you

You can mine all SHA 256 coins with Bi•Fury

codrm86

newbie

Activity: 6

Merit: 0

Hi, what about refund for my order? I write three consecutive days to [email protected], but there is still no response.

Felipeo

sr. member

Activity: 476

Merit: 262

EOSABC

Quote from: goldfuture on February 23, 2014, 04:56:10 PM

Can I mine with bi fury other currency like digitalcoin or just bitcoin?

thank you

You can mine all SHA 256 coins with Bi•Fury

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: chek2fire on February 23, 2014, 04:15:03 PM

Try to buy an anker or i run them to much cheaper tecknet

http://www.amazon.co.uk/TeckNet%C2%AE-Power-Adapter-Cable-Chipset/dp/B00DCO9YVM

thank you, but i have a problem with usb 3.0 on my computer because it cant recognize the device so i am afraid to buy it... anyway

how is it possible that it can run lets say 5GH via usb 2 that is cca 480mb/s... so does somebody know what data goes through it? does it do some upload?
and another question is. Can I mine with bi fury other currency like digitalcoin or just bitcoin?

thank you

chek2fire

legendary

Activity: 3430

Merit: 1142

Ιntergalactic Conciliator

Try to buy an anker or i run them to much cheaper tecknet

http://www.amazon.co.uk/TeckNet%C2%AE-Power-Adapter-Cable-Chipset/dp/B00DCO9YVM

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: -ck on February 22, 2014, 07:52:10 PM

Quote from: goldfuture on February 22, 2014, 10:15:04 AM

Now i tried reinstall driver again. Unplug and then plug bi fury back and then start cgminer... now there is no error but speed is zero. it is not mining http://imageshack.com/a/img716/8349/x7jr.jpg

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

If the driver is detected and working correctly and speed is zero you don't have enough power. These suck a LOT of power.

Also that version of cgminer is ancient, use a newer one (but that's not your problem).

You was right. It is working now. Thank you very much. The problem was with power..
Can I have another question? What kind of steady full powered port (hub) could you recommend me? Something price/performance? Something cheaper, because I am new "miner" and i have just one bi fury yet. If it will work i will rather buy Antiminer.

BitOp3000

newbie

Activity: 1

Merit: 0

I'm having a similar problem. Running Windows 7 x64. I successfully updated my Bi*Fury's firmware, but it's still not being recognized in my USB 3.0 or 2.0 ports. I can't get the driver loaded from Zadig and if I try to run CGMiner 4.0.0 anyway, it just constantly shows 0.00 GH/s...

Quote from: ManeBjorn on January 19, 2014, 02:59:27 PM

Your quite correct.
I had that happen the first time I tried it as well.
Then I flashed it and it was good but a bit buggy so I flashed again and it worked great ever since.
Hopefully that can be added to the direction page for everyone.

Quote from: FalconFly on January 19, 2014, 12:24:03 PM

I think there's a small but important point missing in the description of the Firmware flash process :

- you need to keep those contacts closed all the way until the System recognizes it as Storage Device, installs/initializes USB Storage driver and opens appropiate Window on the Desktop/Device Icon appears - basically until the found storage device is clearly ready to use. This will take at least several seconds.

Letting go too early or temporarily losing the short circuit (can be a bit tricky to keep it closed all the time) just for an instant won't make the LED light up again (making it look like everything works as planned) but interrupts the whole process and will cause various errors in terms of device handling.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

What you should do is get a better hub as ckolivas said as they do need a steady full powered port.
The 2nd thing is to remove all the drivers and get rid of that cgminer it is old.
Re-install the correct drivers for BFGMiner. Once it is all setup download MultiMiner and use that to run your miners.
It has an easy to use GUI and will help you out a ton.
https://bitcointalksearch.org/topic/multiminer-any-miner-any-where-on-any-device-free-open-source-cross-platform-248173
Also a link to his website for MultiMiner with driver links and setup instructions.
I hope this helps you out.

Quote from: goldfuture on February 22, 2014, 05:08:10 PM

Quote from: Bearclaw on February 22, 2014, 02:03:21 PM

Quote from: goldfuture on February 22, 2014, 10:15:04 AM

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

You have to keep the contacts closed until Windows recognizes it a a drive and you see it appear in explorer. The first time always take a bit longer...

I flashed it twice, but still same problem... :/

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: goldfuture on February 22, 2014, 10:15:04 AM

Now i tried reinstall driver again. Unplug and then plug bi fury back and then start cgminer... now there is no error but speed is zero. it is not mining http://imageshack.com/a/img716/8349/x7jr.jpg

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

If the driver is detected and working correctly and speed is zero you don't have enough power. These suck a LOT of power.

Also that version of cgminer is ancient, use a newer one (but that's not your problem).

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: Bearclaw on February 22, 2014, 02:03:21 PM

Quote from: goldfuture on February 22, 2014, 10:15:04 AM

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

You have to keep the contacts closed until Windows recognizes it a a drive and you see it appear in explorer. The first time always take a bit longer...

I flashed it twice, but still same problem... :/

Bearclaw

newbie

Activity: 52

Merit: 0

Quote from: goldfuture on February 22, 2014, 10:15:04 AM

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

You have to keep the contacts closed until Windows recognizes it a a drive and you see it appear in explorer. The first time always take a bit longer...

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: merv77 on February 22, 2014, 10:12:04 AM

Quote from: goldfuture on February 22, 2014, 09:51:08 AM

Quote from: merv77 on February 22, 2014, 09:41:26 AM

Quote from: goldfuture on February 22, 2014, 09:37:14 AM

Quote from: goldfuture on February 22, 2014, 08:40:46 AM

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

when i turn on cgminer and then plug bifury i got this error
https://imagize[Suspicious link removed]ageshack.us/v2/647x496q90/62/wo82.jpg

are you using usb port on computer or usb powered hub?
do you have fan to cool it down?
have you used 'zadig.exe' to load 'winUSB' driver?
are you plugging in after starting cgminer?

I am using usb extender, but i tried it in usb2 and usb 3 too, so i dont know if it is a problem using it through extender.
I have Artic breeze fan.
I reinstal driver with zadig
It doesnt matter if i plug it after or before.... but in beginning it didnt say that there is some error just it has 0 hash speed
There are some photos...
http://imageshack.com/a/img163/8827/pp9j.jpg
http://imageshack.com/a/img856/2845/e8pf.jpg

it should work, it seems you've done everything correct.

have you tried it without the usb extender?

yes i tried.
Now i tried reinstall driver again. Unplug and then plug bi fury back and then start cgminer... now there is no error but speed is zero. it is not mining http://imageshack.com/a/img716/8349/x7jr.jpg

I was thinking about new firmware. I tried put pins together and after plug it how it is in pdf guide but bi fury didnt open like some storage.. hmm

merv77

hero member

Activity: 574

Merit: 500

1.21 GIGA WATTS

Quote from: goldfuture on February 22, 2014, 09:51:08 AM

Quote from: merv77 on February 22, 2014, 09:41:26 AM

Quote from: goldfuture on February 22, 2014, 09:37:14 AM

Quote from: goldfuture on February 22, 2014, 08:40:46 AM

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

when i turn on cgminer and then plug bifury i got this error
https://imagize[Suspicious link removed]ageshack.us/v2/647x496q90/62/wo82.jpg

are you using usb port on computer or usb powered hub?
do you have fan to cool it down?
have you used 'zadig.exe' to load 'winUSB' driver?
are you plugging in after starting cgminer?

I am using usb extender, but i tried it in usb2 and usb 3 too, so i dont know if it is a problem using it through extender.
I have Artic breeze fan.
I reinstal driver with zadig
It doesnt matter if i plug it after or before.... but in beginning it didnt say that there is some error just it has 0 hash speed
There are some photos...
http://imageshack.com/a/img163/8827/pp9j.jpg
http://imageshack.com/a/img856/2845/e8pf.jpg

it should work, it seems you've done everything correct.

have you tried it without the usb extender?

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: merv77 on February 22, 2014, 09:41:26 AM

Quote from: goldfuture on February 22, 2014, 09:37:14 AM

Quote from: goldfuture on February 22, 2014, 08:40:46 AM

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

when i turn on cgminer and then plug bifury i got this error
https://imagize[Suspicious link removed]ageshack.us/v2/647x496q90/62/wo82.jpg

are you using usb port on computer or usb powered hub?
do you have fan to cool it down?
have you used 'zadig.exe' to load 'winUSB' driver?
are you plugging in after starting cgminer?

I am using usb extender, but i tried it in usb2 and usb 3 too, so i dont know if it is a problem using it through extender.
I have Artic breeze fan.
I reinstal driver with zadig
It doesnt matter if i plug it after or before.... but in beginning it didnt say that there is some error just it has 0 hash speed
There are some photos...
http://imageshack.com/a/img163/8827/pp9j.jpg
http://imageshack.com/a/img856/2845/e8pf.jpg

merv77

hero member

Activity: 574

Merit: 500

1.21 GIGA WATTS

Quote from: goldfuture on February 22, 2014, 09:37:14 AM

Quote from: goldfuture on February 22, 2014, 08:40:46 AM

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

when i turn on cgminer and then plug bifury i got this error
https://imagizer.imageshack.us/v2/647x496q90/62/wo82.jpg

are you using usb port on computer or usb powered hub?
do you have fan to cool it down?
have you used 'zadig.exe' to load 'winUSB' driver?
are you plugging in after starting cgminer?

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: goldfuture on February 22, 2014, 08:40:46 AM

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

when i turn on cgminer and then plug bifury i got this error
https://imagizer.imageshack.us/v2/647x496q90/62/wo82.jpg

goldfuture

newbie

Activity: 8

Merit: 0

Quote from: pajak666 on February 22, 2014, 08:00:12 AM

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

I did it but USB3.0 says Unknown Device and if i plug it back to USB2.0 it can recognize as Bi fury.
But i have another problem.
Even if it is plugged to USB 2... cgminer, sgminer, bfgminer still crashed after start... after start bat file it just appeard for a sec terminal.. Do you know how to fix it? i am trying two days fix it...

pajak666

hero member

Activity: 746

Merit: 502

Looking for advertising deal

Quote from: goldfuture on February 22, 2014, 07:28:35 AM

Hello guys,

I need your help. Three days ago I have bought Bi fury 5GH, but I have some issues. My computer (win7) cant recognize it in USB 3.0, it can recognize as Unknown Device. I tried install many recommened drivers but nothing helped. My computer can easly recognize Bi fury in USB 2. Do you think that another FIRMWARE is needed?

Thank you for your help.

just install drivers while it's plugged to usb 2.0 port, then switch to 3.0 port, drivers should be loaded already

Topic: [ANN] Bi•Fury | 5 GH/s USB Miner [IN STOCK!] {SALE !} - page 2. (Read 305017 times)