Bittrex is going to start limiting trades though.
Even with those you will still be able to use at least 6 bots on 6 different markets at the same time.
Topic: [ANN] Bittrex / Poloniex / Cryptsy All Coin Trading Software, Quatloo Trader. - page 80. (Read 236632 times)
September 04, 2014, 10:40:13 PM
Even with those you will still be able to use at least 6 bots on 6 different markets at the same time.
September 04, 2014, 10:37:48 PM
Bittrex is going to start limiting trades though.
September 04, 2014, 08:51:18 PM
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
+1
This combined with my earlier suggestions would be very powerful:
█ Multiple Market Tabs per Exchange so that we don't have to run multiple copies of the app. Bittrex allows 60 API requests per minute as well as multiple bots running on multiple markets for a single IP address/account, so this is not a problem. 6-10 market tabs per exchange would be sufficient (e.g. 6-10 bots running 2 orders each spread across a second range, that is what I achieve with macros and a dozen copies of the app running).
█ Ability to set bids at a percentage lower than the top bid instead of a satoshi count lower. Also for that bid to automatically update to always reflect that % lower than current top bid. At the moment the user has to keep manually recalculating what e.g 2% lower is in satoshis for each coin that they automatically trade.
September 04, 2014, 06:12:04 PM
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
+1
September 04, 2014, 05:17:32 PM
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
September 04, 2014, 05:07:16 PM
Yeah still using it every day. Great job so far. Surprised its not more popular yet but I guess it hasn't been promoted much.
+1
September 04, 2014, 11:39:09 AM
Yeah still using it every day. Great job so far. Surprised its not more popular yet but I guess it hasn't been promoted much.
September 04, 2014, 11:31:59 AM
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
Thank you! hey, we're just getting started!
September 04, 2014, 11:20:41 AM
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
Totally agree! It is AWESOME!
September 04, 2014, 11:01:50 AM
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
September 04, 2014, 10:02:47 AM
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress
This was originally an implementation to avoid certain types of hacks/cracks that could bypass the QTL holding requirements. I may do it a different way to avoid the app purposefully breaking itself.
Ah ok i see your point, that makes sense! And thank you for working on a fix for that, hopefully this could work without breaking your security rules. Otherwise I need to start thinking connecting a SIM card to my computer, load it up with some data-volume, installing a directional antenna et voilà, having a non-stop internet connection :-D
September 04, 2014, 09:21:15 AM
Well, this is a bit of a blow for users using API trade bots on Bittrex. (although not massive)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
That's actually a good thing. Too many fools were running their bots on 5 and 10 second intervals. At least now everyone has a chance to get in the action a little easier.
I'm up to 30+ seconds now the macro I posted earlier is easily edited though
September 04, 2014, 09:19:22 AM
Well, this is a bit of a blow for users using API trade bots on Bittrex. (although not massive)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
That's actually a good thing. Too many fools were running their bots on 5 and 10 second intervals. At least now everyone has a chance to get in the action a little easier.
September 04, 2014, 07:21:46 AM
A few of the fixes talked about here are going to be implemented. It will be a couple of days as I will not release another build until big additions are complete. next version is 2.0.2.0
September 04, 2014, 07:20:22 AM
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress
This was originally an implementation to avoid certain types of hacks/cracks that could bypass the QTL holding requirements. I may do it a different way to avoid the app purposefully breaking itself.
September 04, 2014, 05:13:50 AM
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress
September 04, 2014, 04:45:42 AM
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-(
using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus
is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
September 04, 2014, 04:44:11 AM
V2.0.0.18 is working brilliantly after 16 hours of constant use!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell.
2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell.
2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
I'm looking forward to this one, Markus said he's implementing this soon.
September 04, 2014, 04:42:40 AM
V2.0.0.18 is working brilliantly after 16 hours of constant use!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell.
2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell.
2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
September 04, 2014, 04:39:47 AM
Well, this is a bit of a blow for users using API trade bots on Bittrex. (although not massive)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
https://bittrex.zendesk.com/hc/en-us/articles/202673194-The-taming-of-the-Bots-Part-II
Order Entry
- Number open orders per market will be limited to 10.
- Only 100 orders may be placed in a one hour period on a given market.
(These caps apply both to UI and API trades)
That's not a concern to an intelligent bot. Quatloo trader will need to evolve to the level of:
http://www.butter-bot.com/
https://cryptotrader.org/
https://www.haasbot.com/haasonline-trading-server/ (large amount of technical indicators it can act upon)
Jump to: