Topic: [ANN] [CLOAK] Cloakcoin | No Premine | X13 | Decentralized Market and PoSA - page 634. (Read 1266573 times)

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Quote from: Coolstoryteller on July 08, 2014, 11:56:58 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http[Suspicious link removed]

i dowloaded the program from your link but dont load ...when i try to open it

After you download the missing.dll and put into the system32 folder.

the file i dowloaded is setup file i have to open it and run but it wont open..

The OpenSSL setup file won't open for you? I just tested it, working fine here. What error are you getting, if any?

I had the same error message eg the missing DLL dialog. Ran the SSL pack as per the link in one of the posts but it warned that the C redistributable libraries 2008 or similar where not found. BTW: You CAN continue the installation if you are not into reading and pondering messages and manually cancel the install and yes then the wallet will not run ! Anyhow:
Downloaded vcredist_x86 from Microsoft (for Win 7 32 bit - your version may vary) Installed and then ran the ssl package again (Win32OpenSSL-Light-1_1_0h.exe) After this the wallet (1.9.5.2) ran and synchronised without any problem.

tubesteak

sr. member

Activity: 378

Merit: 250

This run should shake out the last of the weak brittle baby hands. I'm glad I have strong hands from boxing and wrestling. lol

ningning

newbie

Activity: 21

Merit: 0

Quote from: ningning on July 08, 2014, 11:51:43 PM

I download the wallet using url on first page.

OSX (Mac) Wallet 1.9.5.2 with TOR and CloakTrade

When I run cloakcoin-qt, it's said " the file is damaged, can not open it".

Did you do a clean install by backing up your wallet.dat then erasing everything in the library/appsupport/cloakcoin?

This is the first time I install cloakqt. I think there is nothing to clear.

Coolstoryteller

sr. member

Activity: 350

Merit: 250

Quote from: ningning on July 08, 2014, 11:51:43 PM

I download the wallet using url on first page.

OSX (Mac) Wallet 1.9.5.2 with TOR and CloakTrade

When I run cloakcoin-qt, it's said " the file is damaged, can not open it".

Did you do a clean install by backing up your wallet.dat then erasing everything in the library/appsupport/cloakcoin?

ymod123

sr. member

Activity: 432

Merit: 250

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Quote from: ymod123 on July 08, 2014, 11:49:48 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

i manage to open it but its telling me

"THE WIN32 OPENSSL INSTALLATION PROJECT SETUP HAS DETECTED THAT THE FOLLOWING CRITICAL COMPONENT IS MISSING:
MICROSOFT VISUAL C++ 2008 REDISTRIBUTABLES
WIN32OPENSSL WILL NOT FUNCTION PROPERLY WITHOUT THIS COMPONENT.
IT IS RECOMMENDED THAT YOU INSTALL THE MISSING COMPONENT BEFORE CLICKING OK"

I JUST PRESS OKAY I THINK IT IS INSTALLING NOW... THANKS! HOPE THIS WORKS

CryptoAllDay

sr. member

Activity: 578

Merit: 250

Quote from: Coolstoryteller on July 08, 2014, 11:41:44 PM

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Quote from: Coolstoryteller on July 08, 2014, 11:41:44 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http[Suspicious link removed]

i dowloaded the program from your link but dont load ...when i try to open it

After you download the missing.dll and put into the system32 folder.

the file i dowloaded is setup file i have to open it and run but it wont open..

The OpenSSL setup file won't open for you? I just tested it, working fine here. What error are you getting, if any?

ningning

newbie

Activity: 21

Merit: 0

I download the wallet using url on first page.

OSX (Mac) Wallet 1.9.5.2 with TOR and CloakTrade

When I run cloakcoin-qt, it's said " the file is damaged, can not open it".

ymod123

sr. member

Activity: 432

Merit: 250

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Quote from: ningning on July 08, 2014, 11:45:39 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

i dowloaded the program from your link but dont load ...when i try to open it

After you download the missing.dll and put into the system32 folder.

the file i dowloaded is setup file i have to open it and run but it wont open..

Coolstoryteller

sr. member

Activity: 350

Merit: 250

The macos wallet doesn't work. The file is damaged.

Im using the OSX walet and it works fine.

Make sure you do a fresh install though follow the directions in the OP.

Quote from: TheDagger on June 26, 2014, 01:07:30 PM

Anybody experiencing any of the following:

Coins not arriving at mintpal or other exchange
Wallet is out of sync
Not displaying the exact block number as showing on the Cloak block explorer... http://cloak.blockexplorer.cc/chain/CloakCoin

Follow the instructions posted below.

Quote from: ozkraut on June 26, 2014, 02:49:17 AM

went through the same. Apparently fork on mintpal. Only way to recover for me was:

1. Make copy of wallet.dat -DO NOT MISS THIS else coin gone
2. Get rid of the entire appdata\roaming\cloakcoin folder
3. Run the wallet
4. stop it and copy your saved wallet.dat back in
5. create a cloakcoin.conf file in the appdata\roaming\cloakcoin folder
6. add some nodes eg this is the content of my file:

Get latest nodes from... http://cloak.blockexplorer.cc/nodes/

7. Run the wallet again and let it sync

I had to restart it a couple of times to get the sync to complete
If your coins don't show (happened to me) : go to debug console and enter and run repairwallet

Should be good after that

ningning

newbie

Activity: 21

Merit: 0

The macos wallet doesn't work. The file is damaged.

Coolstoryteller

sr. member

Activity: 350

Merit: 250

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

i dowloaded the program from your link but dont load ...when i try to open it

After you download the missing.dll and put into the system32 folder.

ymod123

sr. member

Activity: 432

Merit: 250

Quote from: Coolstoryteller on July 08, 2014, 11:26:49 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

i dowloaded the program from your link but dont load ...when i try to open it

ymod123

sr. member

Activity: 432

Merit: 250

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

i just install this program? thanks i will try it...

Coolstoryteller

sr. member

Activity: 350

Merit: 250

Quote from: zing96 on July 08, 2014, 11:09:54 PM

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

thanks in advance for the help..

So you just need to install the latest openSSL such as the following:

http://slproweb.com/download/Win32OpenSSL-1_0_1h.exe

ymod123

sr. member

Activity: 432

Merit: 250

Need help for new wallet I dowloaded the new wallet and install it
its telling me "the program cant start beacuse
LIBEAY32.dll is missing from your compouter.try reinstalling ther program to fix this problem"

Im still using v1.9.5.0 and since july 6 till now my coins Mint but all unconfirmed about 35 mint not confirmed Sad

thanks in advance for the help..

HoraceHippo

newbie

Activity: 2

Merit: 0

Hi All,

I know this is my first post, but I've been lurking here a while, since the launch and relaunch. I have thoroughly enjoyed the support, fud, and flaming on a daily basis.
Anywho, I have coins stuck in a CLOAK dedicated pool back from the POW stage and the site says payouts are disabled.

Does anyone know if I have a way to get these coins out? I am a proud bag holder.
http://cloak.v2.dedicatedpool.com/

Thanks for your help in advance.

Youghoor

sr. member

Activity: 1036

Merit: 275

Quote from: zing96 on July 08, 2014, 09:53:15 PM

This doesn't build on linux and their git page hasn't been updated in 19 days. https://github.com/CloakCoin/CloakCoinRelaunch

Why won't the devs show us the code? Possible fishy things going on.

Devs please release the newest source on git.

It has been discussed so many times.

Devs don't want their product to be stolen for creating the shit clone coins.

As long as the tech works i don't see the problems.

They need to release a precompiled binary for Linux then. I have no Windows or OSX computers so I cannot hold my coins except on an exchange.

That's a fair point for the next required wallet update. Up until now, all updates are optional. If you can't compile the current Linux source, head to the IRC and get some assistance.

I'm in IRC. I run the bot in the channel. I just want to have it in writing permanently here that there should at least be a precompiled linux binary in the near future so people only running Linux can hold their coins and use the new features as well.

So what was your whole point here? To get help compiling a linux wallet, have them update the github, or to "have it in writing permanently?" It's kind of a sh*tty way to go about things with your fishy comment. Maybe just ask nicely to have a compiled binary instead of suggesting fishy behavior or putting big red letters.

For the record, the linux source code on github compiles on Ubuntu 14.04 LTS. I just installed a VM and compiled it myself following the instructions in https://github.com/CloakCoin/CloakCoinRelaunch/blob/master/doc/readme-qt.rst. Not sure what version of linux you're using, but it compiles. I'm sorry they haven't updated it to the latest version, but like several people have said, that's for a reason.

this works for me as well, do not know why they are facing such problems.

zing96

sr. member

Activity: 266

Merit: 250

Quote from: zing96 on July 08, 2014, 09:53:15 PM

This doesn't build on linux and their git page hasn't been updated in 19 days. https://github.com/CloakCoin/CloakCoinRelaunch

Why won't the devs show us the code? Possible fishy things going on.

Devs please release the newest source on git.

It has been discussed so many times.

Devs don't want their product to be stolen for creating the shit clone coins.

As long as the tech works i don't see the problems.

They need to release a precompiled binary for Linux then. I have no Windows or OSX computers so I cannot hold my coins except on an exchange.

That's a fair point for the next required wallet update. Up until now, all updates are optional. If you can't compile the current Linux source, head to the IRC and get some assistance.

I'm in IRC. I run the bot in the channel. I just want to have it in writing permanently here that there should at least be a precompiled linux binary in the near future so people only running Linux can hold their coins and use the new features as well.

So what was your whole point here? To get help compiling a linux wallet, have them update the github, or to "have it in writing permanently?" It's kind of a sh*tty way to go about things with your fishy comment. Maybe just ask nicely to have a compiled binary instead of suggesting fishy behavior or putting big red letters.

For the record, the linux source code on github compiles on Ubuntu 14.04 LTS. I just installed a VM and compiled it myself following the instructions in https://github.com/CloakCoin/CloakCoinRelaunch/blob/master/doc/readme-qt.rst. Not sure what version of linux you're using, but it compiles. I'm sorry they haven't updated it to the latest version, but like several people have said, that's for a reason.

Coolstoryteller

sr. member

Activity: 350

Merit: 250

Quote from: smokim87 on July 08, 2014, 09:56:38 PM

Quote from: smokim87 on July 08, 2014, 09:50:19 PM

This doesn't build on linux and their git page hasn't been updated in 19 days. https://github.com/CloakCoin/CloakCoinRelaunch

Why won't the devs show us the code? Possible fishy things going on.

Devs please release the newest source on git.

It has been discussed so many times.

Devs don't want their product to be stolen for creating the shit clone coins.

As long as the tech works i don't see the problems.

They need to release a precompiled binary for Linux then. I have no Windows or OSX computers so I cannot hold my coins except on an exchange.

The source is on github, it works just add the nodes in the main post.

It's broken with 12 errors and none of the new features are in it. I built an earlier version of it when the relaunch first happened, so they broke it between then and now.

I see, well your right on that. I think the devs are online in the IRC if not they are usually online in about 3-4 hours from now.

Yes I apologize for the comment about things being fishy, I didn't see the posts regarding keeping the code hidden from potential clone coins.

I would just like a precompiled linux binary with every new major release. Shouldn't be much of a task. It's probably easier to build on linux than windows and osx.

The devs haven't released a new source because it protects the investors at this point. The Linux/OSX versions were on the backburner by the devs but they said they will be releasing the OSX/Linux versions with each new mandatory update.

I actually agree with you, Linux is the easiest out of the three to work with. It should be the first one to be released.

smokim87

hero member

Activity: 952

Merit: 500

Quote from: smokim87 on July 08, 2014, 09:50:19 PM