[ANN] [CPU mining] Yenten v3.1.0 [YTN] [YespowerR16] [Exchange available] - page 18.

yaronidon

newbie

Activity: 23

Merit: 0

Quote from: bubasik on April 03, 2019, 08:00:29 AM

Quote from: yaronidon on April 03, 2019, 07:50:57 AM

why yenten mining on all pools is dead ?

What?
http://cpu-pool.com - ok
https://pool.rplant.xyz - ok
https://pool.sonox.io - ok
https://yenten.luckypool.org - ok
http://trossmining.zapto.org - ok
http://yenten-pool.info - ok

I just noticed algo was changed from YesCryptR16 to YesPowerR16
Since when this change and why it was changed ?

netto7

jr. member

Activity: 252

Merit: 4

Quote from: bubasik on April 04, 2019, 03:10:25 PM

Quote from: netto7 on April 04, 2019, 02:39:27 PM

Quote from: bubasik on April 04, 2019, 05:54:45 AM

Which hashrate gives the processor - Ryzen2600?

p.s. Also write here your processor and hashrate. (os, ram [dd3 dual, ddr4 2600 dual, etc])

around 1300-1380 on ryzen 2600 not OC.

if you oc to 4Ghz maybe it hit 1400

1000 h/s = 0.28 usd (now)
0.28*1.3*30=10.92 usd/month - cool Wink

From nicehash - 6 usd/usd

Yenten coin - the most profitable coin! (For CPU)

that very good profitable coin for cpu

bubasik

member

Activity: 302

Merit: 26

Quote from: netto7 on April 04, 2019, 02:39:27 PM

Quote from: bubasik on April 04, 2019, 05:54:45 AM

Which hashrate gives the processor - Ryzen2600?

p.s. Also write here your processor and hashrate. (os, ram [dd3 dual, ddr4 2600 dual, etc])

around 1300-1380 on ryzen 2600 not OC.

if you oc to 4Ghz maybe it hit 1400

1000 h/s = 0.28 usd (now)
0.28*1.3*30=10.92 usd/month - cool Wink

From nicehash - 6 usd/usd

Yenten coin - the most profitable coin! (For CPU)

deltagap

newbie

Activity: 30

Merit: 0

https://i.imgur.com/gab91Md.png

OK, It doen't allow me to insert images....

Position 1201 on CoinMarketCap

netto7

jr. member

Activity: 252

Merit: 4

Quote from: bubasik on April 04, 2019, 05:54:45 AM

Which hashrate gives the processor - Ryzen2600?

p.s. Also write here your processor and hashrate. (os, ram [dd3 dual, ddr4 2600 dual, etc])

around 1300-1380 on ryzen 2600 not OC.

if you oc to 4Ghz maybe it hit 1400

magonrus

newbie

Activity: 50

Merit: 0

Quote from: bubasik on April 04, 2019, 05:54:45 AM

Which hashrate gives the processor - Ryzen2600?

p.s. Also write here your processor and hashrate. (os, ram [dd3 dual, ddr4 2600 dual, etc])

W7x64 YespowerR16

Celeron G3900 2xddr4-2133 - 358 H/s
Core i5-6400T 2xddr4-2133 - 668 H/s
Xeon E3-1245 2xddr3-1333 - 680 H/s (HT disabled)
Core i5-3570 2xddr3-1600 - 770 H/s
Core i5-4690 2xddr3-1600 - 830 H/s
Ryzen 7 1700X 2xddr4-3000 - 1250 H/s (SMT disabled)

bubasik

member

Activity: 302

Merit: 26

Quote from: den4xx on April 04, 2019, 06:05:15 AM

Quote from: YentenCommunity on April 03, 2019, 01:36:11 PM

Quote from: den4xx on April 02, 2019, 11:17:31 PM

Each time the wallet is synchronized for a long time. There are only 3 active connections. What can be done?

What is your wallet version?
If not 3.1.0, update to 3.1.0 please.

If already 3.1.0, how about adding "addnode" ?
We can put a "yenten.conf" file on the folder in which your wallet.dat exists,
and can find a nodes list from here, for example:
http://spbird.mydns.jp/myexplorer2/probeexplorer.php?timezone=2&probeno=7&coinno=24&rawmode=3
Please select nodes which are showed as "[subver] => /Yenten:3.1.0/"

https://cdn1.savepice.ru/uploads/2019/4/4/a3869c46ca3dfe27d27bb9ef01e26654-full.png
where exactly to add nodes?

In console:

Code:

addnode 1.2.3.4 add

https://bytwork.com/sites/default/files/styles/content_574/public/inline/images/kak_dobavlyat_uzly_v_koshelek.png?itok=E5uQgjmN

sample:

Code:

addnode 112.137.102.52:49941 add
addnode 115.69.236.89:32766 add
addnode 116.91.89.16:57844 add
addnode 122.19.203.209:41507 add
addnode 125.24.4.153:58666 add
addnode 14.12.126.0:6205 add
addnode 180.42.175.133:47462 add
addnode 185.185.71.113:9981 add
addnode 192.99.19.160:9981 add
addnode 195.154.78.14:33882 add
addnode 2.243.48.238:8014 add
addnode 212.192.89.210:9981 add
addnode 37.0.48.238:9981 add
addnode 45.62.244.64:49648 add
addnode 46.39.204.197:49214 add
addnode 60.120.168.98:9981 add
addnode 62.140.250.154:32974 add
addnode 84.121.171.2:59186 add
addnode 85.203.164.138:5523 add
addnode 89.169.100.15:63447 add
addnode 89.175.21.59:9981 add
addnode 95.129.140.52:13413 add
addnode 95.54.197.160:9981 add

den4xx

newbie

Activity: 8

Merit: 0

Quote from: YentenCommunity on April 03, 2019, 01:36:11 PM

Quote from: den4xx on April 02, 2019, 11:17:31 PM

Each time the wallet is synchronized for a long time. There are only 3 active connections. What can be done?

What is your wallet version?
If not 3.1.0, update to 3.1.0 please.

If already 3.1.0, how about adding "addnode" ?
We can put a "yenten.conf" file on the folder in which your wallet.dat exists,
and can find a nodes list from here, for example:
http://spbird.mydns.jp/myexplorer2/probeexplorer.php?timezone=2&probeno=7&coinno=24&rawmode=3
Please select nodes which are showed as "[subver] => /Yenten:3.1.0/"

https://cdn1.savepice.ru/uploads/2019/4/4/a3869c46ca3dfe27d27bb9ef01e26654-full.png
where exactly to add nodes?

bubasik

member

Activity: 302

Merit: 26

Which hashrate gives the processor - Ryzen2600?

p.s. Also write here your processor and hashrate. (os, ram [dd3 dual, ddr4 2600 dual, etc])

bubasik

member

Activity: 302

Merit: 26

How to set your YIIMP pool for coin Yenten Coin on algorithm yespowerR16?
Simply and easily....

Yiimp fork with Yespower and YespowerR16 - https://github.com/bubasik/yiimp-yespowerr16-ytn/

Bash install script Yiimp-ytn for ubuntu 16.04 - https://github.com/bubasik/yiimp-install-script-on-ubuntu/

How to install the yiimp pool on the ubuntu 16.04 server and configure yenten coin - http://www.bubasik.com/how-to-install-the-yiimp-pool-on-the-ubuntu-16-04-server-and-configure-yenten-coin-stratum-yescryptr16/

YentenCommunity

copper member

Activity: 231

Merit: 35

To the pool admin intending to newly set up mining pool for Yenten
The algorithm of Yenten has been changed to YespowerR16 (yespower-1.0,N=4096,r=16),
on and after 30 March 2019 00:00:00(UTC; unixtime:1553904000), with Yenten 3.1.0.
YespowerR16 is a bit different from standard Yespower (which is used for CranePay, Veco and Bellcoin) in some parameters:
- standard yespower: N=2048, r=32
- YespowerR16: N=4096, r=16
Also yespower has 2 modes... one is yespower-0.5 for yescrypt comatible mode and another is yespower-1.0 for REAL yespower.
Now Yenten 3.1.0 is running with yespower-1.0 mode.
...in former days, yespower-0.5-R16 was called simply "yespowerR16", so we need caution...

Please refer the link below about yespower:
https://cvsweb.openwall.com/cgi/cvsweb.cgi/projects/yespower/README?rev=1.1

Here is the instruction to add yespowerR16 algorithm to yiimp(in the case that you already have the standard yespower setting), by bubasik:
http://forum.yentencoin.info/discussion/13/how-to-add-yespowerr16-to-yiimp-pool/

YentenCommunity

copper member

Activity: 231

Merit: 35

Quote from: den4xx on April 02, 2019, 11:17:31 PM

Each time the wallet is synchronized for a long time. There are only 3 active connections. What can be done?

What is your wallet version?
If not 3.1.0, update to 3.1.0 please.

If already 3.1.0, how about adding "addnode" ?
We can put a "yenten.conf" file on the folder in which your wallet.dat exists,
and can find a nodes list from here, for example:
http://spbird.mydns.jp/myexplorer2/probeexplorer.php?timezone=2&probeno=7&coinno=24&rawmode=3
Please select nodes which are showed as "[subver] => /Yenten:3.1.0/"

bubasik

member

Activity: 302

Merit: 26

Quote from: ILMC on April 03, 2019, 10:22:53 AM

Quote from: yaronidon on April 03, 2019, 07:50:57 AM

why yenten mining on all pools is dead ?

https://ytn.overemo.com/pools

1   cpu-pool.com    1 min 57 sec ago   185.043 KH/s   226   15523.74%   60.71%
2   Zergpool (yespowerR16)    26 sec ago    61.177 KH/s   167   5132.30%   20.07%
3   AntMinePool (yespowerR16)   46 sec ago    32.311 KH/s   72   2710.65%   10.60%
4   yenten.luckypool    2 min 17 sec ago   22.842 KH/s   275   1916.28%   7.49%
5   cpumining.zapto.org (yespowerR16)   1 min 57 sec ago   2.917 KH/s   3   244.71%   0.96%
6   ytn.firstpool    2 min 17 sec ago   528 H/s   2   44.30%   0.17%

changed the algorithm and bots fell off.
New algo - turned off mining on video cards.

Actually pool list: https://miningpoolstats.stream/yenten

ILMC

full member

Activity: 406

Merit: 100

Quote from: yaronidon on April 03, 2019, 07:50:57 AM

why yenten mining on all pools is dead ?

https://ytn.overemo.com/pools

1   cpu-pool.com     1 min 57 sec ago   185.043 KH/s   226   15523.74%   60.71%
2   Zergpool (yespowerR16)     26 sec ago     61.177 KH/s   167   5132.30%   20.07%
3   AntMinePool (yespowerR16)   46 sec ago     32.311 KH/s   72   2710.65%   10.60%
4   yenten.luckypool     2 min 17 sec ago   22.842 KH/s   275   1916.28%   7.49%
5   cpumining.zapto.org (yespowerR16)   1 min 57 sec ago   2.917 KH/s   3   244.71%   0.96%
6   ytn.firstpool     2 min 17 sec ago   528 H/s   2   44.30%   0.17%

cryptopool.builders

copper member

Activity: 344

Merit: 0

We have modified the starting difficulty over at thepool.life. Thanks for the feedback

bubasik

member

Activity: 302

Merit: 26

Quote from: yaronidon on April 03, 2019, 07:50:57 AM

why yenten mining on all pools is dead ?

What?
http://cpu-pool.com - ok
https://pool.rplant.xyz - ok
https://pool.sonox.io - ok
https://yenten.luckypool.org - ok
http://trossmining.zapto.org - ok
http://yenten-pool.info - ok

yaronidon

newbie

Activity: 23

Merit: 0

why yenten mining on all pools is dead ?

bubasik

member

Activity: 302

Merit: 26

Quote from: den4xx on April 03, 2019, 06:58:13 AM

maybe I didn't understand or you misunderstood me
but overall my wallet is synchronized, but I turn it on once a day. But every time I have to wait a long time when the blocks are synchronized in the last 24 hours. Previously, before the change of the algorithm, everything was faster.

I have an office processor (G3250, standart HDD) - 10 hours synchronized in a few minutes.
(when tested Fast_yenten)

den4xx

newbie

Activity: 8

Merit: 0

Quote from: bubasik on April 03, 2019, 04:59:25 AM

Quote from: den4xx on April 02, 2019, 11:17:31 PM

Each time the wallet is synchronized for a long time. There are only 3 active connections. What can be done?

And for all newbies:

When you first start Yenten Coin - use - Fast_yenten (release 1.1)

Download Fast_yenten - https://github.com/bubasik/fast_yenten

Quote

Download https://github.com/bubasik/fast_yenten/releases/download/1.1/fast_yenten.zip unpack and run fast_yenten.bat

Automatic installation Yenten wallet in folder c:\yenten with last blockchain. Fast run - 5 min.

Or download blockchain:

http://yenten-pool.info/blocks_yenten_last.zip

Quote

is created every night

maybe I didn't understand or you misunderstood me
but overall my wallet is synchronized, but I turn it on once a day. But every time I have to wait a long time when the blocks are synchronized in the last 24 hours. Previously, before the change of the algorithm, everything was faster.

bubasik

member

Activity: 302

Merit: 26

Quote from: den4xx on April 02, 2019, 11:17:31 PM

Each time the wallet is synchronized for a long time. There are only 3 active connections. What can be done?

And for all newbies:

When you first start Yenten Coin - use - Fast_yenten (release 1.1)

Download Fast_yenten - https://github.com/bubasik/fast_yenten

Quote

Download https://github.com/bubasik/fast_yenten/releases/download/1.1/fast_yenten.zip unpack and run fast_yenten.bat

Automatic installation Yenten wallet in folder c:\yenten with last blockchain. Fast run - 5 min.

Or download blockchain:

http://yenten-pool.info/blocks_yenten_last.zip

Quote

is created every night

Topic: [ANN] [CPU mining] Yenten v3.1.0 [YTN] [YespowerR16] [Exchange available] - page 18. (Read 16812 times)