[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 1107.

Waramp22

sr. member

Activity: 321

Merit: 250

I have a fresh install of Windows 7 64 bit.
I dont see the "No Thanks" option anywhere. Im either blind or retarded.

Schleicher

hero member

Activity: 675

Merit: 514

Quote from: Waramp22 on April 27, 2013, 01:15:32 PM

Anyone have the link to download cudaminer handy that doesnt require google chrome?

Just click on "no thanks"
Works fine with IE 10

Waramp22

sr. member

Activity: 321

Merit: 250

Anyone have the link to download cudaminer handy that doesnt require google chrome?

TiuraZ

member

Activity: 101

Merit: 10

How are you guys getting 120-130 khash/s out of GTX 460? Overclocking? Because mine is only doing around 100 khash/s.

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: BrewCrewFan on April 27, 2013, 12:01:17 AM

Quote from: statdude on April 26, 2013, 11:56:06 PM

I've unzipped the cudaminer.
Now what?

have you installed all the other requirements also listed on the first post? For the prethreads I unpacked that also into the folder that I made for cudaminer

Worst advice ever. These are compilation requirements only. Wink

What may be required in some cases is the Visual Studio 2010 Runtime libraries. I did not include them because they would make the download much bigger: http://www.microsoft.com/en-us/download/details.aspx?id=8328

Signus

newbie

Activity: 28

Merit: 0

Awesome tool. Works quite well.

EVGA NVIDIA GTX 480 is averaging about ~180kH/s without any tuning. I'll do some tuning later and see what I can get.

I'll even try my Linux partition and see how the performance differs.

KnowBuddy

member

Activity: 69

Merit: 10

Quote from: statdude on April 27, 2013, 12:25:31 AM

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."

Appreciate the help. This looks fun.

One point:

Coinotron LTC is Stratum only. You will need to run a stratum proxy program and point your minerd.exe (and your cudaminer.exe when you get to that) to http://170.0.0.1:8332 or http://localhost:8332 (same user/pass info).

This would be my suggestion for the .bat file for your setup on coinotron:
start mining_proxy.exe -pa scrypt -o coinotron.com -p 3334
start cudaminer.exe -i 0 -C 2 -l 30x8 -o http://localhost:8332 -O worker1username:worker1password
start minerd.exe --threads 4 --url http://localhost:8332 --userpass worker2username:worker2password

You will see json_rpc_call failed errors until the mining proxy program is up and running. I suggest running minerd with --threads 3 if you're seeing significantly lower hashrate for your GPU when also running minerd.

termhn

full member

Activity: 126

Merit: 100

Quote from: statdude on April 27, 2013, 12:25:31 AM

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."

Appreciate the help. This looks fun.

couldn't connect means you typed in the host address wrong... make sure you have the port and url correct. Also make sure you have myuser.worker1:workerpassword as your actual worker username/password!

statdude

legendary

Activity: 1498

Merit: 1000

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."

Appreciate the help. This looks fun.

termhn

full member

Activity: 126

Merit: 100

Quote from: statdude on April 26, 2013, 11:56:06 PM

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

http://teksyndicate.com/forum/litecoin/guide-mining-nvidia-now-guide-mining-feathercoin/137688
If you need more help after that ask.

BrewCrewFan

hero member

Activity: 672

Merit: 501

Quote from: statdude on April 26, 2013, 11:56:06 PM

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

have you installed all the other requirements also listed on the first post? For the prethreads I unpacked that also into the folder that I made for cudaminer

statdude

legendary

Activity: 1498

Merit: 1000

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

xandriel

sr. member

Activity: 586

Merit: 251

What a great miner

Is there any correlation between the launch configurations and the number of shaders on the gpu?

beppe

newbie

Activity: 14

Merit: 0

Quote from: nst6563 on April 26, 2013, 04:41:41 PM

I have a gt430 and it's using -i 0 -C 2 -l 112x2. Nets about 37kh/s after a little overclocking.

thanks! with same parameters i get 20 kh/s, no overclock

zeded

full member

Activity: 192

Merit: 501

thank you. it worked great.
i have a gigabyte windforce gtx 570 1.25gb
achieved 200k/s

nst6563

sr. member

Activity: 252

Merit: 254

I have a gt430 and it's using -i 0 -C 2 -l 112x2. Nets about 37kh/s after a little overclocking.

BrewCrewFan

hero member

Activity: 672

Merit: 501

Quote from: Lacan82 on April 26, 2013, 04:29:25 PM

Quote from: BrewCrewFan on April 26, 2013, 04:25:19 PM

Quote from: Lacan82 on April 26, 2013, 04:18:43 PM

Quote from: beppe on April 26, 2013, 04:17:19 PM

Quote from: cbuchner1 on April 26, 2013, 02:17:15 PM

[2013-04-26 20:10:35] GPU #0: with compute capability 716.25

See, it can't even open your GPU. No name indicated and compute capability is bogus.

Try updating your driver. It must be new enough to support CUDA 5.0.

thank you and to all the others, I solved installing latest 314.22 nvidia driver!

now I see

Code:

[2013-04-26 22:10:48] GPU #0: GeForce GT 430, 81408 hashes, 18.13 khash/s

same speed of cgminer but it's ok!

Try it with -I 0 at the end of the launch

that is a -i and not an uppercase.

He might also try using the -l flag also to see how it goes. My 450 has one of -l 40x2 I think.

If you're using any extra flags you should always autotune before using -l because you might actually end up using a lower config.

and my add-on for IE auto corrects

very true at least get a feel for what your card would be set at for that flag. Of course... if set too high you will get a hash rate of 600+ and toss out errors about the CPU or something lol.

Lacan82

sr. member

Activity: 247

Merit: 250

Quote from: BrewCrewFan on April 26, 2013, 04:25:19 PM

Quote from: Lacan82 on April 26, 2013, 04:18:43 PM

Quote from: beppe on April 26, 2013, 04:17:19 PM

Quote from: cbuchner1 on April 26, 2013, 02:17:15 PM

[2013-04-26 20:10:35] GPU #0: with compute capability 716.25

See, it can't even open your GPU. No name indicated and compute capability is bogus.

Try updating your driver. It must be new enough to support CUDA 5.0.

thank you and to all the others, I solved installing latest 314.22 nvidia driver!

now I see

Code:

[2013-04-26 22:10:48] GPU #0: GeForce GT 430, 81408 hashes, 18.13 khash/s

same speed of cgminer but it's ok!

Try it with -I 0 at the end of the launch

that is a -i and not an uppercase.

He might also try using the -l flag also to see how it goes. My 450 has one of -l 40x2 I think.

If you're using any extra flags you should always autotune before using -l because you might actually end up using a lower config.

and my add-on for IE auto corrects

cbuchner1

hero member

Activity: 756

Merit: 502

the -i 0 option should be in lower case. Also, consult the spreadsheet linked in first post for possible -l kernel launch parameters. Not sure if we have a GT 430 in there already...

BrewCrewFan

hero member

Activity: 672

Merit: 501

Quote from: Lacan82 on April 26, 2013, 04:18:43 PM

Quote from: beppe on April 26, 2013, 04:17:19 PM

Quote from: cbuchner1 on April 26, 2013, 02:17:15 PM

[2013-04-26 20:10:35] GPU #0: with compute capability 716.25

See, it can't even open your GPU. No name indicated and compute capability is bogus.

Try updating your driver. It must be new enough to support CUDA 5.0.

thank you and to all the others, I solved installing latest 314.22 nvidia driver!

now I see

Code:

[2013-04-26 22:10:48] GPU #0: GeForce GT 430, 81408 hashes, 18.13 khash/s

same speed of cgminer but it's ok!

Try it with -I 0 at the end of the launch

that is a -i and not an uppercase.

He might also try using the -l flag also to see how it goes. My 450 has one of -l 40x2 I think.

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 1107. (Read 3426918 times)