Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 420. (Read 3426976 times)
May 26, 2014, 01:15:38 PM
yes, i always label them the day they were compiled in case anything changed in between
May 26, 2014, 01:12:34 PM
Is there any way to set failovers for CCminer? I've asked this a few times, but never seen an answer.
Also @bigjme
I assume the 26/05/2014 CCminer V1.02 on your website is the version that has been available on the Github master for over a week?
Also @bigjme
I assume the 26/05/2014 CCminer V1.02 on your website is the version that has been available on the Github master for over a week?
May 26, 2014, 12:44:04 PM
I thought it would be easier to look through then a wiki 
Plus it allows me to do stuff like this
http://cudamining.cc/url/configurations?gpu=750Ti&algo=x11&pool=stratum+tcp://erebor.dwarfpool.com:3345&pooluser=test&poolpass=pass
So now if anyone asks for a config and speed, create a link and it shows you an expected hashrate from what other people have submitted. On a side note, if anyone wants to start sending me configs to add feel free. The way i need them sending is they must contain the following
Please only send me the config for your highest achieved hashrate. For example if you have a config for v1.0 and v1.02, only send me the config for the one that was faster, not both this allows me to reduce duplicate results for the same card and algo.
i may add in a power usage column aswell, we will see
Plus it allows me to do stuff like this
http://cudamining.cc/url/configurations?gpu=750Ti&algo=x11&pool=stratum+tcp://erebor.dwarfpool.com:3345&pooluser=test&poolpass=pass
So now if anyone asks for a config and speed, create a link and it shows you an expected hashrate from what other people have submitted. On a side note, if anyone wants to start sending me configs to add feel free. The way i need them sending is they must contain the following
- what miner (cudaminer/ccminer)
- what miner version
- what algorithm
- the launch config
- the gpu
- the hashrate achieved
Please only send me the config for your highest achieved hashrate. For example if you have a config for v1.0 and v1.02, only send me the config for the one that was faster, not both
this allows me to reduce duplicate results for the same card and algo.i may add in a power usage column aswell, we will see
May 26, 2014, 12:37:24 PM
on a side note, anyone interested in giving feedback, what do we think to the download buttons i am using?
http://cudamining.cc/url/releases
the website isnt finished atall and isnt made to look nice, i will be setting it back to editing mode later.
but if you have any recommendations please feel free to go through the site and let me know
http://cudamining.cc/url/releases
the website isnt finished atall and isnt made to look nice, i will be setting it back to editing mode later.
but if you have any recommendations please feel free to go through the site and let me know
Thank you for this! As long as it's updated fast enough, this is absolutely perfect. Who cares about how pretty it is (or isn't, haha)
Yeah Great work with the site! I like its simplicity and the buttons are just fine !
May 26, 2014, 12:10:10 PM
I am thinking maybe to release killer groestl windows binary only and later if found a way to do a full release.
He cannot do a binary only without violating the GPL (or whatever licence is uses) of the open source requirement. That is the issue as I understand it.
I am certainly not bugging him about it, but just trying to help others understand the problem.
He would have to re-write all the code he included from others in order to take it 'closed source', and that would be a whole lot of work to write and debug it all correctly.
Right now he gets to enjoy the fruits of his labor on his own, and that is fine.
May 26, 2014, 11:28:31 AM
I am thinking maybe to release killer groestl windows binary only and later if found a way to do a full release. Maybe a good site for a partial release would be this page: http://cudamining.cc/url/releases
i will keep my eye out and post the newest versions as and when so if christian posts and its not on there within 24 hours, everyone send me a message to make sure i do
ive also just updated the config page again so you can link to your config, sample here
http://cudamining.cc/url/configurations?gpu=750Ti&algo=x11&pool=stratum+tcp://erebor.dwarfpool.com:3345&pooluser=test&poolpass=pass
May 26, 2014, 11:22:55 AM
look forward to the updates
May 26, 2014, 11:18:50 AM
I guess u didn't follow the thread. its gonna be 2.8- 3
5-10% could be on top of that because Christian found something new to improve on.
2.8-3 was mention and shown (screen shot couple of weeks ago if I remember correctly) before telling us 5-10%
Amph follow this thread longer than u do.
I follow and read every single post on this thread starting about 100 pages back.
Until Christian can find a way to release his 'killer Groestl' without violating the license then we are all mostly stuck at the 2.2 range...
I assume his comment means that the 10% is on top of that, but yes if 'killer' comes out it would be included in that as well.
Both are true, but I don't think he is saying the whole enchilada is coming soon (I would love to be wrong).
I am thinking maybe to release killer groestl windows binary only and later if found a way to do a full release. Maybe a good site for a partial release would be this page: http://cudamining.cc/url/releases
May 26, 2014, 11:08:03 AM
I guess u didn't follow the thread. its gonna be 2.8- 3
5-10% could be on top of that because Christian found something new to improve on.
2.8-3 was mention and shown (screen shot couple of weeks ago if I remember correctly) before telling us 5-10%
Amph follow this thread longer than u do.
I follow and read every single post on this thread starting about 100 pages back.
Until Christian can find a way to release his 'killer Groestl' without violating the license then we are all mostly stuck at the 2.2 range...
I assume his comment means that the 10% is on top of that, but yes if 'killer' comes out it would be included in that as well.
Both are true, but I don't think he is saying the whole enchilada is coming soon (I would love to be wrong).
May 26, 2014, 11:05:14 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
so when is the new version comes out?
dunno, probably 1-2 weeks
I would guess less than a week. Latest news was soon-ish. Previous news was some time soon.
I am trying to run on monero (on pool)... curious to know what I will get from that (I can't even open the wallet for the moment
hope it is only temporary) May 26, 2014, 10:50:22 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
I guess u didn't follow the thread. its gonna be 2.8- 3
5-10% could be on top of that because Christian found something new to improve on.
2.8-3 was mention and shown (screen shot couple of weeks ago if I remember correctly) before telling us 5-10%
Amph follow this thread longer than u do.
I follow and read every single post on this thread starting about 100 pages back.
May 26, 2014, 10:48:02 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
May 26, 2014, 10:47:36 AM
If possible try and list the hash rates next to the algorithms section. (edit see this is in the config section, wouldn't hurt to be here too)
What is the login for? Is there going to be a private section?
Good job so far!
Carlo
What is the login for? Is there going to be a private section?
Good job so far!
Carlo
ok all mistakes fixed, what did you mean by the top part in the quote?
and the login section is where i go to edit some things, the actual coding framework is my pet project.
but i may open it up so people can login to post tutorials, and let others add/update sections of the site if they are trust worthy.
so for now it doesnt do anything that you guys might want
On this page: http://cudamining.cc/url/releases
On the right side you could have something like this showing the hash rates for say a 750ti since they are so popular
X11 - 2.1 MH
groestl - 3.3 MH
myr-gr - 6.4 MH
Heavy and/or Hefty1 (MNR) - 12 MH
Fugue - 92 MH
scrypt - 296 KH
jackpot - 4MH
scrypt-jane - 3.5 KH
scrypt-N (ie 2048) - 150 KH
Quark - 3.1 MH
TalkCoin - 5 MH
keccak - ?
AnimeCoin - ?
Carlo
May 26, 2014, 10:40:40 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
so when is the new version comes out?
dunno, probably 1-2 weeks
I would guess less than a week. Latest news was soon-ish. Previous news was some time soon.
May 26, 2014, 10:37:35 AM
If possible try and list the hash rates next to the algorithms section. (edit see this is in the config section, wouldn't hurt to be here too)
What is the login for? Is there going to be a private section?
Good job so far!
Carlo
What is the login for? Is there going to be a private section?
Good job so far!
Carlo
ok all mistakes fixed, what did you mean by the top part in the quote?
and the login section is where i go to edit some things, the actual coding framework is my pet project.
but i may open it up so people can login to post tutorials, and let others add/update sections of the site if they are trust worthy.
so for now it doesnt do anything that you guys might want
May 26, 2014, 10:34:44 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
so when is the new version comes out?
dunno, probably 1-2 weeks
May 26, 2014, 10:32:03 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
so when is the new version comes out?
May 26, 2014, 10:30:40 AM
on a side note, anyone interested in giving feedback, what do we think to the download buttons i am using?
http://cudamining.cc/url/releases
the website isnt finished atall and isnt made to look nice, i will be setting it back to editing mode later.
but if you have any recommendations please feel free to go through the site and let me know
http://cudamining.cc/url/releases
the website isnt finished atall and isnt made to look nice, i will be setting it back to editing mode later.
but if you have any recommendations please feel free to go through the site and let me know
On about page change "christians" so it's capped.
On Release Page:
One suggestion I would make is to reverse the order of the downloads. Keep the most current version at the top.
If possible try and list the hash rates next to the algorithms section. (edit see this is in the config section, wouldn't hurt to be here too)
Change spelling mistake of "alogirthms" to "algorithms" on the right side of the page.
http://cudamining.cc/url/configurations
THIS IS COOL
What is the login for? Is there going to be a private section?
Good job so far!
Carlo
May 26, 2014, 10:18:01 AM
how high can 750ti hashrate go with the newest miner?
2.2MH/s for now, new version will boost to 2.8 or something
May 26, 2014, 09:55:35 AM
very true, thats why its my last task 
i added a quick sample config generator, not polished off, as it doesn't remember the algo or card you selected yet but it does generate a config
looks perfecti added a quick sample config generator, not polished off, as it doesn't remember the algo or card you selected yet but it does generate a config
ok so i have updated it. it now uses the configs that are stored to determine the version of ccminer needed. so give it a try now, it should work a lot better
Bombadils CUDA 2.1 miner for X11 would also be nice to have on there
can you post the link for me to grab? i will just label it as compute 2.0Jump to: