Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 490. (Read 3426976 times)
May 13, 2014, 10:35:16 AM
If i had the time i would. My gpus are on their own monitored psu
May 13, 2014, 10:32:55 AM
Thus far in one post:
1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
5MH - TalkCoin
? - keccak
? - AnimeCoin
Thanks, for that info. Only problem with trying to do wattage is that it's going to vary far to much as each computer is different and will have power supplies with different power factors, etc. Really the only useful way to do that would be for one person to perform all the tests.
1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
5MH - TalkCoin
? - keccak
? - AnimeCoin
Quote
Talkcoin - 5 mhash
Can we include power consumption of a 6 cards rig?
For talkcoin its 320 W
Can we include power consumption of a 6 cards rig?
For talkcoin its 320 W
Thanks, for that info. Only problem with trying to do wattage is that it's going to vary far to much as each computer is different and will have power supplies with different power factors, etc. Really the only useful way to do that would be for one person to perform all the tests.
May 13, 2014, 10:16:47 AM
Thus far in one post:
1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
? - keccak
? - AnimeCoin
? - TalkCoin
Talkcoin - 5 mhash1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
? - keccak
? - AnimeCoin
? - TalkCoin
Can we include power consumption of a 6 cards rig?
For talkcoin its 320 W
May 13, 2014, 10:15:13 AM
Auto tune just crashes all my cards and my 780 aswell
I'm removing the OC for the autotune then I put it back when the miner is done autotuning. It help a lot for me, but also got a few crashes when using the autotune.
May 13, 2014, 10:07:06 AM
Auto tune just crashes all my cards and my 780 aswell
May 13, 2014, 10:05:37 AM
Code:
cudaminer.exe -s 10 --algo=scrypt-jane:YAC -i 0 -C 0 -b 4096 -L 2 -m 1 -H 2
This worked the best for my 5 x 750ti. Got to 3.6kh/s with some OC. I got maybe 0,1kh/s from the autotune, I saw someone claiming he got more but usually 3.5kh/s is pretty much the normal.
Using cudaminer 02-28 x86.
May 13, 2014, 10:01:29 AM
With a GTX690 on stock speed
Thanks guys!
Can you give me the software you?Thanks guys!
My GTS450 is very slow
May 13, 2014, 09:53:09 AM
Can you give me the software you?
My GTS450 is very slow
My GTS450 is very slow
May 13, 2014, 08:04:18 AM
all mh/s per EVGA gtx 750ti non-SC.
what mean non-SC?SC is the super clock edition.
there are three EVGA
750ti
750ti SC (overclocked)
750ti FTW (overoverclocked +6pin)
May 13, 2014, 08:00:45 AM
TalkCoin = 4.5 mh/s ( in refernence an r9 280x does 3.9mh/s and r9 290x does 8.2 mh/s )
bitquark = 3.2 mh/s
securecoin = 3.2 mh/s
diamond = 3.25 mh/s
all mh/s per EVGA gtx 750ti non-SC.
what mean non-SC? bitquark = 3.2 mh/s
securecoin = 3.2 mh/s
diamond = 3.25 mh/s
all mh/s per EVGA gtx 750ti non-SC.
May 13, 2014, 07:56:59 AM
ANd the result:
Code:
[2014-05-13 15:37:43] GPU #0: GeForce GTX 750 Ti result does not validate on CPU
(i=347, s=0)!
:/(i=347, s=0)!
true true. but autotune works not that good with yac in my experience.
-l t4x16 was stable with my different rigs and different OS.
@restless
just make yourself a kopiemtu USB stick... you need just a few minutes and you could test easily if your card is more stable with linux.
May 13, 2014, 07:44:08 AM
TalkCoin = 4.5 mh/s ( in refernence an r9 280x does 3.9mh/s and r9 290x does 8.2 mh/s )
bitquark = 3.2 mh/s
securecoin = 3.2 mh/s
diamond = 3.25 mh/s
all mh/s per EVGA gtx 750ti non-SC.
bitquark = 3.2 mh/s
securecoin = 3.2 mh/s
diamond = 3.25 mh/s
all mh/s per EVGA gtx 750ti non-SC.
May 13, 2014, 07:42:37 AM
Best I achieved on YAC was 1.8KH/s. Trying settings which are claimed to be good for 3.5 gives immediate crash of cudaminer. Maybe downclocking or praying to the Moon while installing drivers can help... no idea :/
depends on the card an the -l switch...
the best command I've found so far was (from ivanlabrie):
--algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
works on a single 750ti with the same performance as with an 6 cards rig.
Code:
[2014-05-13 15:37:43] GPU #0: GeForce GTX 750 Ti result does not validate on CPU
(i=347, s=0)!
:/(i=347, s=0)!
May 13, 2014, 07:39:47 AM
Sorry to derail the current topic, but jackpot coin is nearing the top of swisscex voting! Keep voting there and on mintpal, let's get this cudacoin up into the big leagues. There's really no reason JPC couldn't be a top 10 coin. It's got the features and pretty active community.
Don't hold me accountable in the future, but intuition tells me this coin is WAY undervalued at the moment.
swisscex big leagues ? Don't hold me accountable in the future, but intuition tells me this coin is WAY undervalued at the moment.
Sure it is better than swaphole (I think JPC lost by the way ... but I am currently voting peniscoin to embarrass them as this coin probably doesn't even exist)Lost as in it's a dead coin? I doubt that personally. Swisscex is definitely not big leagues, but it's a start, and there is currently both LTC and Doge markets for it on allcrypt. Gotta start somewhere
I'd say based on the features alone it's not likely to really die, although I don't know enough about the science behind the algo to say if it's going to be future proof enough or if x11 is just too hot right now for other coins to compete. Who knows though with the way this market moves. One good or bad article is all it takes to cause huge swings on the exchanges, haha
May 13, 2014, 07:38:22 AM
Best I achieved on YAC was 1.8KH/s. Trying settings which are claimed to be good for 3.5 gives immediate crash of cudaminer. Maybe downclocking or praying to the Moon while installing drivers can help... no idea :/
depends on the card an the -l switch...
the best command I've found so far was (from ivanlabrie):
--algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
works on a single 750ti with the same performance as with an 6 cards rig.
Code:
[2014-05-13 15:37:43] GPU #0: GeForce GTX 750 Ti result does not validate on CPU
(i=347, s=0)!
:/(i=347, s=0)!
-L 4 gives 2.4KH/s ... best I achieved so far
May 13, 2014, 07:21:18 AM
Thus far in one post:
1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
? - keccak
? - AnimeCoin
? - TalkCoin
1700KH - X11
3.3MH - groestl
6.4MH - myr-gr
12MH - Heavy and/or Hefty1 (MNR)
92MH - Fugue
296KH - scrypt
4MH - jackpot
3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
150KH - scrypt-N (ie 2048)
3.1MH - Quark
? - keccak
? - AnimeCoin
? - TalkCoin
May 13, 2014, 07:17:22 AM
Sorry to derail the current topic, but jackpot coin is nearing the top of swisscex voting! Keep voting there and on mintpal, let's get this cudacoin up into the big leagues. There's really no reason JPC couldn't be a top 10 coin. It's got the features and pretty active community.
Don't hold me accountable in the future, but intuition tells me this coin is WAY undervalued at the moment.
swisscex big leagues ? Don't hold me accountable in the future, but intuition tells me this coin is WAY undervalued at the moment.
Sure it is better than swaphole (I think JPC lost by the way ... but I am currently voting peniscoin to embarrass them as this coin probably doesn't even exist)Lost as in it's a dead coin? I doubt that personally. Swisscex is definitely not big leagues, but it's a start, and there is currently both LTC and Doge markets for it on allcrypt. Gotta start somewhere
I'd say based on the features alone it's not likely to really die, although I don't know enough about the science behind the algo to say if it's going to be future proof enough or if x11 is just too hot right now for other coins to compete. Who knows though with the way this market moves. One good or bad article is all it takes to cause huge swings on the exchanges, haha
May 13, 2014, 07:14:38 AM
Yac only gets kh/s on any miner so it is right
May 13, 2014, 07:13:42 AM
scrypt-jane (YAC) = 3.5KH/s
Is that supposed to be MH or KH? Seems rather low.
May 13, 2014, 07:07:58 AM
Best I achieved on YAC was 1.8KH/s. Trying settings which are claimed to be good for 3.5 gives immediate crash of cudaminer. Maybe downclocking or praying to the Moon while installing drivers can help... no idea :/
depends on the card an the -l switch...
the best command I've found so far was (from ivanlabrie):
--algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2
works on a single 750ti with the same performance as with an 6 cards rig.
Jump to: