https://twitter.com/DesireCoin/status/944356892175867904
The moon will not be far
Topic: ✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS! - page 55. (Read 167500 times)
December 22, 2017, 10:47:23 PM
December 22, 2017, 08:42:18 PM
Cтaтyc: 2873 пoдтвepждeний
Дaтa: 13.12.2017 18:31
Для: MERCATOX DSgRUiNUhtGQ2BCbTKGb5c7cWWVnHwQaNd
Дeбeт: -153.00000000 DSR
Кoмиccия: -0.00001850 DSR
Чиcтaя cyммa: -153.00001850 DSR
ID тpaнзaкции: 228f56e47ed8d06bb1e4504aa4fa17f07103e039191afbd38342fae42b4b8989-000
Пoлный paзмep тpaнзaкции: 1849 bytes
no enrollment dosih on the stock market , tenodera silent , not really for a floor of month it is impossible even to write that netanyas we all enroll , I'm on this shit exchange no longer step
Дaтa: 13.12.2017 18:31
Для: MERCATOX DSgRUiNUhtGQ2BCbTKGb5c7cWWVnHwQaNd
Дeбeт: -153.00000000 DSR
Кoмиccия: -0.00001850 DSR
Чиcтaя cyммa: -153.00001850 DSR
ID тpaнзaкции: 228f56e47ed8d06bb1e4504aa4fa17f07103e039191afbd38342fae42b4b8989-000
Пoлный paзмep тpaнзaкции: 1849 bytes
no enrollment dosih on the stock market , tenodera silent , not really for a floor of month it is impossible even to write that netanyas we all enroll , I'm on this shit exchange no longer step
December 22, 2017, 07:06:15 PM
Looking at your external IP and checking the Masternodes on my wallet it says it's ENABLED and been running for almost 9hrs.
The way you have it setup now you don't have it setup as a hot and cold wallet which is what you really want as it will work but you have to keep the windows wallet and VPS wallet open now or it will stop (well it deffo used to as I did what you did as I had mine running on just my PC to begin with before switching over to VPS. Yes the desire.conf is blank and masternode.conf is filled MN1 209.250.242.217:9919 xxx xxx 1 and then the VPS has the details in desire.conf and then nothing in masternode.conf.
The way you have it setup now you don't have it setup as a hot and cold wallet which is what you really want as it will work but you have to keep the windows wallet and VPS wallet open now or it will stop (well it deffo used to as I did what you did as I had mine running on just my PC to begin with before switching over to VPS. Yes the desire.conf is blank and masternode.conf is filled MN1 209.250.242.217:9919 xxx xxx 1 and then the VPS has the details in desire.conf and then nothing in masternode.conf.
Thanks a lot!!
You are absolut right! thats happend when you only read the "how to´s"
Worked and is enabled!
Cheers mate!
EDIT: is it normal, that my node isnt shown up on http://desire.thecryptochat.net/network.php ?
December 22, 2017, 03:49:25 PM
Looking at your external IP and checking the Masternodes on my wallet it says it's ENABLED and been running for almost 9hrs.
The way you have it setup now you don't have it setup as a hot and cold wallet which is what you really want as it will work but you have to keep the windows wallet and VPS wallet open now or it will stop (well it deffo used to as I did what you did as I had mine running on just my PC to begin with before switching over to VPS. Yes the desire.conf is blank and masternode.conf is filled MN1 209.250.242.217:9919 xxx xxx 1 and then the VPS has the details in desire.conf and then nothing in masternode.conf.
The way you have it setup now you don't have it setup as a hot and cold wallet which is what you really want as it will work but you have to keep the windows wallet and VPS wallet open now or it will stop (well it deffo used to as I did what you did as I had mine running on just my PC to begin with before switching over to VPS. Yes the desire.conf is blank and masternode.conf is filled MN1 209.250.242.217:9919 xxx xxx 1 and then the VPS has the details in desire.conf and then nothing in masternode.conf.
December 22, 2017, 02:39:37 PM
Hi again,
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
When you say windows wallet are you talking about the Desire.conf file on your PC?. If so then that should be empty and the Masternode.conf have the Masternode cnfg like you have written, Then the VPS is the opposite and has the info in Desire.conf and nothing in Masternode.conf. Going by what you've written you currently have the winwallet set as the masternode and also the VPS as the masternode so if you reset the winwallet the masternode would stop.
are you sure? everywhere they talking about, that the win wallet .conf need input too.
So in win wallet i only fill out the masternode.conf and the desire.conf are empty?
How long does the explorer need to access my node or shown up?
Cheers
December 22, 2017, 01:09:01 PM
Hi again,
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
When you say windows wallet are you talking about the Desire.conf file on your PC?. If so then that should be empty and the Masternode.conf have the Masternode cnfg like you have written, Then the VPS is the opposite and has the info in Desire.conf and nothing in Masternode.conf. Going by what you've written you currently have the winwallet set as the masternode and also the VPS as the masternode so if you reset the winwallet the masternode would stop.
December 22, 2017, 12:38:05 PM
Hi again,
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
so my Masternode is running a few hours, but i cant see them in the Block Explorer: http://desire.thecryptochat.net/network.php
After 15 hrs, Win Wallet is writing "Newstart Required".
On VPS i get the info "Masternode not capable"
Did anyone know, how i can check the function?
Her my configs:
Winwallet:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
bind=127.0.0.1:9919 (i add this to start my wallet, otherwise i delete them, wallet want start with RPC Port=9919)
Winwallet Masternode cnfg:
MN1 209.250.242.217:9919 xxx xxx 1
VPS Config:
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=209.250.242.217:9919
masternode=1
masternodeprivkey=xxx
Also Sentinel is running on VPS and i get the Watchdog Error after 15 min.
Is it important to run sentinel on Windows too?
Cheers guys
December 22, 2017, 12:03:46 PM
Another masternode started: DPtoqTK521AfGYU5j3JcKa84X41FZirRhC
December 22, 2017, 01:47:19 AM
Hey everyone, i'm planning on buying 1000 desire coins for a masternode, however i'm wondering if there has been any further progress/interest of including DSR on bigger exchanges in the near future such as bittrex/binance/cryptopia etc.? Thanks
Desire is undervalued now, Desire MN is very cheap under $500 while similar MNs are in the $5,000 range. Compare to similar coins that are using sentinel - DSR is the most stable one, sentinel problems were fixed earlier than for other coins and DSR was the first to release sentinel for Win. This demonstrates the development strength of DSR. My personal view: DSR is a hidden treasure, I am buying it cheap, I do not see the reason why it should not cost as much as other coins (10x potential).
December 22, 2017, 01:40:30 AM
c oднoгo ip мoжнo зaпycтить 5 masternodes?
how to know which port to open?
how to know which port to open?
No, you can't. Desire masternode MUST have port 9919, otherwise it won't start.
----
He, нeльзя. He пoлyчитcя пoмeнять пopт мacтepнoды.
December 22, 2017, 01:36:17 AM
can not run masternode, what do I do wrong?
Not capable masternode: Could not connect to XX.XX.50.80:9919
Make sure port is not blocked by firewall.Not capable masternode: Could not connect to XX.XX.50.80:9919
For Linux VPS:
/sbin/iptables -A INPUT -i eth0 -p tcp --dport 9919 -j ACCEPT
If you are on Win10: check your IP address (Google: "whatismyipaddress").
Most probably you are behind router - you will need to open port on your router.
However I would suggest you to run cold MN on VPS - it costs $5 per month and you can run 4-5 masternodes on it ($1 per month per masternode)
how to know which port to open?
Later on the same VPS you can run INN, VIVO, PNX, HC or whatever you want. 5 MNs will consume only 15% of CPU but will make 1GB of RAM full. 4 MNs will run well on 1GB, add RAM swap file to run 5 or more MNs.
Udachi!
December 21, 2017, 07:37:36 PM
some people still having trouble with MN setup, im doing what i can to help on discord, feel free to ask, im there almost every day
cheers
cheers
December 21, 2017, 06:17:01 PM
im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??
It sounds like you have info within your desire.conf file, If running a cold and hot wallet VPS then the local wallet should only have info in the Masternode.conf file (not Desire.conf) and the VPS should only have info in the Desire.conf file (not masternode.conf).
December 21, 2017, 04:46:39 PM
c oднoгo ip мoжнo зaпycтить 5 masternodes?
how to know which port to open?
how to know which port to open?
No, you can't. Desire masternode MUST have port 9919, otherwise it won't start.
----
He, нeльзя. He пoлyчитcя пoмeнять пopт мacтepнoды.
December 21, 2017, 03:21:23 PM
im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??
December 21, 2017, 02:34:04 PM
I can recommend this coin! High masternode rewards (ROI), easy and fast setup! Also the masternode uses a very small amount of resources (memory, cpu). Keep up the great work you are doing!
Do you see a bright future in this coin? I can't seem to find what makes it different or stand out from other MasterNode coins that are on the market. And also can't seem to find a dated roadmap for when we should be seeing progress? Thank you, i ask these questions as i'm interested in investing in a master node.
December 21, 2017, 02:07:34 PM
I can recommend this coin! High masternode rewards (ROI), easy and fast setup! Also the masternode uses a very small amount of resources (memory, cpu). Keep up the great work you are doing!
December 21, 2017, 12:11:30 PM
I also can't seem to find any roadmap with given dates on Desire coin. It's a very generic roadmap, not listing what they're actually working on currently, with deadlines etc. Does anyone know?
December 21, 2017, 11:54:25 AM
Hey everyone, i'm planning on buying 1000 desire coins for a masternode, however i'm wondering if there has been any further progress/interest of including DSR on bigger exchanges in the near future such as bittrex/binance/cryptopia etc.? Thanks
here's how soon you buy 1000 coins, so immediately interest appears;)
December 21, 2017, 11:53:05 AM
Hey everyone, i'm planning on buying 1000 desire coins for a masternode, however i'm wondering if there has been any further progress/interest of including DSR on bigger exchanges in the near future such as bittrex/binance/cryptopia etc.? Thanks
Jump to: