Please add new pool to OP: https://aikapool.com/dsr
Topic: ✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS! - page 65. (Read 167492 times)
December 10, 2017, 02:30:09 AM
December 09, 2017, 12:42:31 PM
I can't get MN to work ..
When trying to do: masternode outputs
the output is empty ..?
15:41:08

masternode outputs
15:41:08

{
}
That's not right, I assume?
What can I do?
Edit: thos MS Guides are long time outdated? https://github.com/lazyboozer/Desire_files/blob/master/Setup%20Desire%20MasterNodes.pdf
You need to do sentinel etc.? When trying like this it always fails. Ports are forwarded properly and IP adress is correct ..
When trying to do: masternode outputs
the output is empty ..?
15:41:08

masternode outputs
15:41:08

{
}
That's not right, I assume?
What can I do?
Edit: thos MS Guides are long time outdated? https://github.com/lazyboozer/Desire_files/blob/master/Setup%20Desire%20MasterNodes.pdf
You need to do sentinel etc.? When trying like this it always fails. Ports are forwarded properly and IP adress is correct ..
I got that message when my balance was 0, make sure you have exactly 1000DSR in your wallet
December 09, 2017, 12:32:31 PM
I once every 1-3 days reboots the computer on which stands Mastenode
Is there a problem for Mastenode?
Is there a problem for Mastenode?
the same problem. It loads memory hards...
December 09, 2017, 08:13:13 AM
the Mastenode reward will be 20% forever ? no changes to 30% or 40% on the future? (like some other coins)
December 09, 2017, 03:41:04 AM
I found the source code for ios wallet that was used by dash. Hope this helps move development on https://github.com/dashpay/dashwallet/tree/master/BreadWallet1 or
https://github.com/breadwallet (original)
Also, Here is source code from the old doge twitter tip bot
https://github.com/davidmann4/StartUsingDoge
Could possibly be re-worked to allow users to send desire over twitter, which would boost circulation and integration.
Waiting so see this coin take off!
December 08, 2017, 09:18:20 PM
Thanks DEV! Good to see those videos and price has been recovering. All of my masternodes have been working smoothly for the last couple weeks.
Looking forward to a great year with Desire in 2018!
(for new folks having technical challlenges, its 99% likely that your questions have been answered previously in this thread)
Looking forward to a great year with Desire in 2018!
(for new folks having technical challlenges, its 99% likely that your questions have been answered previously in this thread)
December 08, 2017, 08:12:52 PM
December 08, 2017, 05:56:11 PM
Good evening! I installed the wizard for guiding http://www.bittcoinwatch.com/how-to-setup-desire-masternode/ everything is working fine, but after a while the node changes its status to WATCHDOG_EXPIRED, I started sentinel on the server, the node changed the status to ENABLED. And again after a while the status change to WATCHDOG_EXPIRED. I never received the award in a few days, probably because the node was not in status ENABLED for 16-24 hours?
When I close Putty, process sentinel continues to work in the background?
https://i.imgur.com/2ULYMKM.jpg
When I close Putty, process sentinel continues to work in the background?
https://i.imgur.com/2ULYMKM.jpg
December 08, 2017, 02:03:19 PM
MPool is ready for Desire (Neoscrypt): https://mpool.mooo.com
fee rate 0.5%, no need registration, payouts every 1 hour, welcome!
-o stratum+tcp://mpool.mooo.com:3433 -u -p c=DSR
fee rate 0.5%, no need registration, payouts every 1 hour, welcome!
-o stratum+tcp://mpool.mooo.com:3433 -u
Correct port 4233
December 08, 2017, 08:18:45 AM
https://node-vps.com/web/dashboard/index.php?upage=nodes
I was successfully activated two masternodes, and do not need to open the wallet in my computer, the same reward
I was successfully activated two masternodes, and do not need to open the wallet in my computer, the same reward
is it still good to masternode desire coin?
how much u can gett?
Hello, check https://masternodes.online/currencies/DSR/ - this website gives you detailled data on MN costs, profits etc.
Is it possible to set up the masternode using dyndns service? Would like to do so at my home server. I have a 100 Mbit connection but the IP is not static. Is there any option to do so?
Any body knows?
Hello, you need a fixed IP. If you do not have that, I think you could use a VPS just for tunneling the traffic. So I think, you can use for example a home server (with dynamic IP) which connects using OpenVPN to a VPS which has a static IP. But thats maybe a bit too much work, you could just rent a cheap VPS instead.
If you really want to do it, check e.g. this guide: https://coolaj86.com/articles/reverse-vpn-turn-any-private-device-into-public-cloud-server/
But please take care, you may need to setup a script to autoreconnect the VPN if the tunnel gets interupted/disconnected in case of network interruptions. Also such interruptions could cause your MN to get banned/blacklisted and not get paid. So that thing is a risky setup :-)
okayy broo.. go to the linkk
thank youu
December 08, 2017, 07:36:00 AM
how can I check the status of my masternodes?
Go to masternodes tab on your wallet.There are 2 tabs, my masternodes and all masternodes.
Check if your masternode is enabled and find your address from all masternodes tab.
In the tabs of all masternodes I found my own, the status of the enable
but in the masonry of my masternodes there is nothing to do, why?
December 08, 2017, 06:29:29 AM
I can't get MN to work ..
When trying to do: masternode outputs
the output is empty ..?
15:41:08

masternode outputs
15:41:08

{
}
That's not right, I assume?
What can I do?
Edit: thos MS Guides are long time outdated? https://github.com/lazyboozer/Desire_files/blob/master/Setup%20Desire%20MasterNodes.pdf
You need to do sentinel etc.? When trying like this it always fails. Ports are forwarded properly and IP adress is correct ..
When trying to do: masternode outputs
the output is empty ..?
15:41:08

masternode outputs
15:41:08

{
}
That's not right, I assume?
What can I do?
Edit: thos MS Guides are long time outdated? https://github.com/lazyboozer/Desire_files/blob/master/Setup%20Desire%20MasterNodes.pdf
You need to do sentinel etc.? When trying like this it always fails. Ports are forwarded properly and IP adress is correct ..
Exactly the same problem...
December 08, 2017, 04:10:03 AM
please help me configure MASTERNODS I'm just new to this business and do not understand what to do. I have 2k coins.
December 07, 2017, 11:11:24 PM
do i need a static ip to for the local wallet to run a masternode ? i got a vps but my home internet ip is dynamic ,or do i need to keep the wallet open at all ?
Don't you need a static ip for a vps?Anyway, you need a static ip for a masternode and yes you need to run the wallet 24 hours.
December 07, 2017, 10:57:54 PM
how can I check the status of my masternodes?
Go to masternodes tab on your wallet.There are 2 tabs, my masternodes and all masternodes.
Check if your masternode is enabled and find your address from all masternodes tab.
December 07, 2017, 10:16:24 PM
do i need a static ip to for the local wallet to run a masternode ? i got a vps but my home internet ip is dynamic ,or do i need to keep the wallet open at all ?
December 07, 2017, 05:37:16 PM
how can I check the status of my masternodes?
December 07, 2017, 03:32:41 PM
how to backup wallet?so i can connect in the case i lost pc?
where i can find info about that?
guys...
i wanna sent coins from exchange to wallet,so it can b safe
where i can find info about that?
guys...
i wanna sent coins from exchange to wallet,so it can b safe
December 07, 2017, 02:14:51 PM
https://node-vps.com/web/dashboard/index.php?upage=nodes
I was successfully activated two masternodes, and do not need to open the wallet in my computer, the same reward
I was successfully activated two masternodes, and do not need to open the wallet in my computer, the same reward
is it still good to masternode desire coin?
how much u can gett?
Hello, check https://masternodes.online/currencies/DSR/ - this website gives you detailled data on MN costs, profits etc.
Is it possible to set up the masternode using dyndns service? Would like to do so at my home server. I have a 100 Mbit connection but the IP is not static. Is there any option to do so?
Any body knows?
Hello, you need a fixed IP. If you do not have that, I think you could use a VPS just for tunneling the traffic. So I think, you can use for example a home server (with dynamic IP) which connects using OpenVPN to a VPS which has a static IP. But thats maybe a bit too much work, you could just rent a cheap VPS instead.
If you really want to do it, check e.g. this guide: https://coolaj86.com/articles/reverse-vpn-turn-any-private-device-into-public-cloud-server/
But please take care, you may need to setup a script to autoreconnect the VPN if the tunnel gets interupted/disconnected in case of network interruptions. Also such interruptions could cause your MN to get banned/blacklisted and not get paid. So that thing is a risky setup :-)
December 07, 2017, 09:57:06 AM
Hello. After a while, the status changed from ENABLED to PRE_ENABLED. The time was reset. How to deal with this problem?
If it's less than 24 hours online maybe is just a sync problem with other nodes
Jump to: