New version of sentinel v1.1.0.1
/desire/sentinel, inifile:
collected 14 items / 2 errors
================================================================================ ERRORS ================================================================================
_________________________________________________________ ERROR collecting test/unit/models/test_proposals.py __________________________________________________________
ImportError while importing test module '******/desire/sentinel/test/unit/models/test_proposals.py'.
Original error message:
'No module named builtins'
Make sure your test modules/packages have valid Python names.
________________________________________________________ ERROR collecting test/unit/models/test_superblocks.py _________________________________________________________
ImportError while importing test module '******/desire/sentinel/test/unit/models/test_superblocks.py'.
Original error message:
'No module named builtins'
Make sure your test modules/packages have valid Python names.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Interrupted: 2 errors during collection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
======================================================================= 2 error in 0.55 seconds ========================================================================
Help!!!
Topic: ✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS! - page 80. (Read 167492 times)
November 23, 2017, 07:37:36 AM
November 23, 2017, 06:37:26 AM
November 23, 2017, 01:43:48 AM
Hello all,
I have a strange problem with my Desire wallet. It runs but doesn't open properly. It's only appears in tray.
I have updated it, deleted the old blockchain and so on but nothing helps. This problem only with Desire wallet. Pls help!
I have a strange problem with my Desire wallet. It runs but doesn't open properly. It's only appears in tray.
I have updated it, deleted the old blockchain and so on but nothing helps. This problem only with Desire wallet. Pls help!
November 22, 2017, 08:41:13 PM
What's the current circulation?
Anybody working with CMC to fix the "?" circulation?
Anybody working with CMC to fix the "?" circulation?
November 22, 2017, 08:29:42 PM
Great news: Desire addeded to Worldcoinindex - https://www.worldcoinindex.com/coin/desire!
Feels like, the coin from this news has fallen in price even more.) November 22, 2017, 07:46:46 PM
This is disaster. I bought coins for MN, but for two days I can't make it to work. I can't pass Not capable masternode: Could not connect to xxx obstacle.
I have:
- Windows 10
- Desire Core version v0.12.2.1-ge537a31 (32-bit)
- Sentinel release v1.1.0.1 (64-bit)
I tried to setup it by following 2-3 manuals, but I didn't manage to make it to work.
And then when nothing was working I was sending my coins back to exchange deleting wallet and conf folder and then doing every manual from the beginning. Was reading every last 30 pages on this thread.
I was even following advice to send 10 DSR MN address, but that also didn't help.
More than once fixing wallet with sentinel option #2, didn't help.
Running Sentinel with all 3 ways. Sentinel is working, because it has connection with wallet. It knows when wallet is not fully synced.
Rebuilding wallet index...
I was trying to leave the wallet locked and to unlock it. Didn't help.
Was checking are ports open and they are.
Leaving MN for 24 hours in WATCHDOG_EXPIRED status, but nothing was changed.
IP address in desire.conf and masternode.conf are the same and it is IP taken from www.whatismyip.com
Here are screenshots where you can see my current situation.
https://imgur.com/a/MuB0K
I am now out of options. Read desperate.
Any idea or suggestive advice?
Thank you.
Since you're setting it up with a single wallet try this.I have:
- Windows 10
- Desire Core version v0.12.2.1-ge537a31 (32-bit)
- Sentinel release v1.1.0.1 (64-bit)
I tried to setup it by following 2-3 manuals, but I didn't manage to make it to work.
And then when nothing was working I was sending my coins back to exchange deleting wallet and conf folder and then doing every manual from the beginning. Was reading every last 30 pages on this thread.
I was even following advice to send 10 DSR MN address, but that also didn't help.
More than once fixing wallet with sentinel option #2, didn't help.
Running Sentinel with all 3 ways. Sentinel is working, because it has connection with wallet. It knows when wallet is not fully synced.
Rebuilding wallet index...
I was trying to leave the wallet locked and to unlock it. Didn't help.
Was checking are ports open and they are.
Leaving MN for 24 hours in WATCHDOG_EXPIRED status, but nothing was changed.
IP address in desire.conf and masternode.conf are the same and it is IP taken from www.whatismyip.com
Here are screenshots where you can see my current situation.
https://imgur.com/a/MuB0K
I am now out of options. Read desperate.
Any idea or suggestive advice?
Thank you.
1. Stop Sentinel
2. Setup your masternode.conf file according to the manual.
3. restart your wallet
4. Start you masternode from the Masternodes - My Masternoides tab
5. In the debug window type masternode status and make sure your masternode is started.
6. Run the Sentinel and make sure it produces no errors
7. Wait
At step 5 I am getting Not capable masternode: Could not connect to.
Can't have it in status Started.
What type of internet connection are you on? I believe there is something that must be done with the router for it to work on your windows computer. I wasn't able to get it to work on my home comp because I don't have access to the router.. anyway, instead of having my computer on all day, I use hostmns.net service for $5 a month. I like that I can have my coins locked on my computer at home but it doesn't have to be on. Also, I have a few masternodes (each getting 10 per day) and since they need to be on different ip's anyways, the hosting service makes sense. You could hook it all up yourself on ubuntu but I think it will still cost close to $5/month..
My Internet connection is provided by TV cable operator. It is with static IP.
If look at last screenshot on (https://imgur.com/a/MuB0K) you will see that connections are established on port 9919. Which I guess means that port is open.
Just to add that port is also open in firewall.
And when I am starting wallet, MN is in status PRE_ENABLED. And after it finishes with synchronization MN will go to status WATCHDOG_EXPIRED.
Those are the only two statuses that I was seeing!
I was starting the masternode from Masternode tab and from Console. Every time I will got message that MS is started successfully.
But status will be "Not capable..."
Can you check if the port 9919 open at canyouseeme.org?
November 22, 2017, 06:16:33 PM
Great news: Desire addeded to Worldcoinindex - https://www.worldcoinindex.com/coin/desire!
November 22, 2017, 04:45:43 PM
This is disaster. I bought coins for MN, but for two days I can't make it to work. I can't pass Not capable masternode: Could not connect to xxx obstacle.
I have:
- Windows 10
- Desire Core version v0.12.2.1-ge537a31 (32-bit)
- Sentinel release v1.1.0.1 (64-bit)
I tried to setup it by following 2-3 manuals, but I didn't manage to make it to work.
And then when nothing was working I was sending my coins back to exchange deleting wallet and conf folder and then doing every manual from the beginning. Was reading every last 30 pages on this thread.
I was even following advice to send 10 DSR MN address, but that also didn't help.
More than once fixing wallet with sentinel option #2, didn't help.
Running Sentinel with all 3 ways. Sentinel is working, because it has connection with wallet. It knows when wallet is not fully synced.
Rebuilding wallet index...
I was trying to leave the wallet locked and to unlock it. Didn't help.
Was checking are ports open and they are.
Leaving MN for 24 hours in WATCHDOG_EXPIRED status, but nothing was changed.
IP address in desire.conf and masternode.conf are the same and it is IP taken from www.whatismyip.com
Here are screenshots where you can see my current situation.
https://imgur.com/a/MuB0K
I am now out of options. Read desperate.
Any idea or suggestive advice?
Thank you.
Since you're setting it up with a single wallet try this.I have:
- Windows 10
- Desire Core version v0.12.2.1-ge537a31 (32-bit)
- Sentinel release v1.1.0.1 (64-bit)
I tried to setup it by following 2-3 manuals, but I didn't manage to make it to work.
And then when nothing was working I was sending my coins back to exchange deleting wallet and conf folder and then doing every manual from the beginning. Was reading every last 30 pages on this thread.
I was even following advice to send 10 DSR MN address, but that also didn't help.
More than once fixing wallet with sentinel option #2, didn't help.
Running Sentinel with all 3 ways. Sentinel is working, because it has connection with wallet. It knows when wallet is not fully synced.
Rebuilding wallet index...
I was trying to leave the wallet locked and to unlock it. Didn't help.
Was checking are ports open and they are.
Leaving MN for 24 hours in WATCHDOG_EXPIRED status, but nothing was changed.
IP address in desire.conf and masternode.conf are the same and it is IP taken from www.whatismyip.com
Here are screenshots where you can see my current situation.
https://imgur.com/a/MuB0K
I am now out of options. Read desperate.
Any idea or suggestive advice?
Thank you.
1. Stop Sentinel
2. Setup your masternode.conf file according to the manual.
3. restart your wallet
4. Start you masternode from the Masternodes - My Masternoides tab
5. In the debug window type masternode status and make sure your masternode is started.
6. Run the Sentinel and make sure it produces no errors
7. Wait
At step 5 I am getting Not capable masternode: Could not connect to.
Can't have it in status Started.
What type of internet connection are you on? I believe there is something that must be done with the router for it to work on your windows computer. I wasn't able to get it to work on my home comp because I don't have access to the router.. anyway, instead of having my computer on all day, I use hostmns.net service for $5 a month. I like that I can have my coins locked on my computer at home but it doesn't have to be on. Also, I have a few masternodes (each getting 10 per day) and since they need to be on different ip's anyways, the hosting service makes sense. You could hook it all up yourself on ubuntu but I think it will still cost close to $5/month..
My Internet connection is provided by TV cable operator. It is with static IP.
If look at last screenshot on (https://imgur.com/a/MuB0K) you will see that connections are established on port 9919. Which I guess means that port is open.
Just to add that port is also open in firewall.
And when I am starting wallet, MN is in status PRE_ENABLED. And after it finishes with synchronization MN will go to status WATCHDOG_EXPIRED.
Those are the only two statuses that I was seeing!
I was starting the masternode from Masternode tab and from Console. Every time I will got message that MS is started successfully.
But status will be "Not capable..."
November 22, 2017, 03:10:46 PM
Can someone give a link for detailed Info for how to run two mn on a Windows vps with 2 IP. Only way is cold wallet? Very confusing for a newbie. Btw i got watchdog expired failure. But at the same time i got my payments. Still do i have install sentinel thing ?
November 22, 2017, 02:59:41 PM
is the block reward still 20% for the masternode? is there any chart for masternode profits, like B3 and similar coins have?
What about MNrank,com
November 22, 2017, 02:12:09 PM
is the block reward still 20% for the masternode? is there any chart for masternode profits, like B3 and similar coins have?
November 22, 2017, 01:51:17 PM
wow another MN coin
November 22, 2017, 12:13:53 PM
you should delete old blockchain files and use new desire-qt.exe sync blockchain,it work fine for me.
Where is old blockchain? Tell me please path for Win10? I not delete old blockchain, but wallet work fine. November 22, 2017, 10:50:45 AM
Is official block explorer down ? I dont get a proper result when i search my address .
November 22, 2017, 10:12:22 AM
you should delete old blockchain files and use new desire-qt.exe sync blockchain,it work fine for me.
Where is old blockchain? Tell me please path for Win10? I not delete old blockchain, but wallet work fine.look under c:\users\yourusername\appdata\roaming for the desire folder.
Make sure to leave behind wallet.dat and the conf files when you delete stuff.
November 22, 2017, 09:44:41 AM
you should delete old blockchain files and use new desire-qt.exe sync blockchain,it work fine for me.
Where is old blockchain? Tell me please path for Win10? I not delete old blockchain, but wallet work fine. 
November 22, 2017, 09:34:52 AM
For a detailed guide of the download, verification and installation process, see How to install Desire Core.
Where is guide: "How to install Desire Core"? I have Win10. Close old wallet, download new (12.2.1) and run file desire-qt.exe?
you should delete old blockchain files and use new desire-qt.exe sync blockchain,it work fine for me.
November 22, 2017, 09:27:29 AM
Hy,
my Pool have found only one right block. 7569
https://miner-control.de/explorer/1921?txid=1f7e2589d41c633709a990a57f5c706ab0488b8cd896b46b55fa0d42ceeefe6b
But after that, i become only orphan blocks. Does anybody know why?
my Pool have found only one right block. 7569
https://miner-control.de/explorer/1921?txid=1f7e2589d41c633709a990a57f5c706ab0488b8cd896b46b55fa0d42ceeefe6b
But after that, i become only orphan blocks. Does anybody know why?
November 22, 2017, 07:37:27 AM
Please fix sentinel MN ASAP so the price can go up 
November 22, 2017, 07:22:53 AM
For a detailed guide of the download, verification and installation process, see How to install Desire Core.
Where is guide: "How to install Desire Core"? I have Win10. Close old wallet, download new (12.2.1) and run file desire-qt.exe?
Jump to: