[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 693.

utahjohn

hero member

Activity: 630

Merit: 500

Just had a look at ebay for current prices on 7950 and 280x. Not really worth selling the AMD cards (would take a huge loss).
Revised plan: Run both 280x and 750ti in same box for now. Slowly phase out my AMD cards and go with 750ti (adding 1 or 2 a month). One 280x already re-purposed for use in entertainment box. (Mining on it when not watching movies)

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

anybody tried the 970 and/or 980?

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: cryptonit on September 25, 2014, 02:26:06 AM

Quote from: Reggie0 on September 24, 2014, 05:37:05 PM

Quote from: utahjohn on September 24, 2014, 04:50:57 PM

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

1000W? You will get very low efficiency. 750ti requires around 40W/card. Do not increase power limit in gpu's bios.
If I were you I would replace the MOBO. x1 PCIe slots has performance penalty because ccminer uses off GPU target checking, therefore you will get high PCIe load.

i would not buy any GPU that cant offer the hashpower/watt ratio a 750ti have
go with 6x 750ti and sell ur 280s

a 1000w PSU is nice so u can consider also add some asic to the system later on use the same psu

@reggie0 i use 6x 750ti on that mainboard and have no penalty at all from pcie x1
example DMD groestl mining 7.5 mhash each card x11 2.7 mhash x13 2.1 mhash

I second cryptonit's comment on 750ti's. I have been running (10) of them for about a year now and love them. They each run around 8mh/s. I have (2) rigs one with (6) 750ti's and (1) with (4) 750ti's. I have the (6) running on a 1000 watt Rosewill PS and on that rig I also run (1) gridseed blade and (4) gridseed orbs. No problems whatsoever. I burn approximately 700watts with the (6) cards, mobo, asics. Not bad at all. I use powered usb risers and lose no power whether on 1x or 16x. It just doesn't matter. Go with the 750ti's. I am waiting on the next revision of the Maxwell processor :-)

racasanuk

member

Activity: 94

Merit: 10

hi I am a mining noob but I decided to try mining this coin on the multi pool and now I have questions

how long are the coins Unconfirmed for?
am I actually mining dmd?
my miner seems to think I have mined some dmd coins but the multipool is saying I have mined some btc
the number of btc's the pool says I have mined is not in agreement with the mining software is reporting - whats that about?

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

Quote from: Reggie0 on September 24, 2014, 05:37:05 PM

Quote from: utahjohn on September 24, 2014, 04:50:57 PM

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

1000W? You will get very low efficiency. 750ti requires around 40W/card. Do not increase power limit in gpu's bios.
If I were you I would replace the MOBO. x1 PCIe slots has performance penalty because ccminer uses off GPU target checking, therefore you will get high PCIe load.

i would not buy any GPU that cant offer the hashpower/watt ratio a 750ti have
go with 6x 750ti and sell ur 280s

a 1000w PSU is nice so u can consider also add some asic to the system later on use the same psu

@reggie0 i use 6x 750ti on that mainboard and have no penalty at all from pcie x1
example DMD groestl mining 7.5 mhash each card x11 2.7 mhash x13 2.1 mhash

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

i would not buy any GPU that cant offer the hashpower/watt ratio a 750ti have
go with 6x 750ti and sell ur 280s

a 1000w PSU is nice so u can consider also add some asic to the system later on use the same psu

chris_dmd

newbie

Activity: 57

Merit: 0

https://www.youtube.com/watch?v=qdsTUfDTEhQ

chris_dmd

newbie

Activity: 57

Merit: 0

Can I just say that the 750Ti has been talked up way to much!! you might as well use a GT640 single slot!! the gtx 660 which is end of line will smash the 750Ti for the same price,or slightly less! also looks much nicer in an open case!!!!!

Reggie0

member

Activity: 107

Merit: 13

Quote from: utahjohn on September 24, 2014, 05:50:03 PM

Quote from: Reggie0 on September 24, 2014, 05:37:05 PM

Quote from: utahjohn on September 24, 2014, 04:50:57 PM

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

1000W? You will get very low efficiency. 750ti requires around 40W/card. Do not increase power limit in gpu's bios.
If I were you I would replace the MOBO. x1 PCIe slots has performance penalty because ccminer uses off GPU target checking, therefore you will get high PCIe load.

I'll stick with the 280x then, I can safely run three on 1000W?

Will add another PS for additional cards ...

I run 2x r9 290 on 750W. I suppose 1200W would be better for you. But don't give up your 750Ti plans. It has much better efficiency(hash/joule) than 280x, lower price drop over time if you would like to sell it in the future, generates less noise, has lower temperature(usually <65 celsius), etc..

utahjohn

hero member

Activity: 630

Merit: 500

Quote from: Reggie0 on September 24, 2014, 05:37:05 PM

Quote from: utahjohn on September 24, 2014, 04:50:57 PM

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

1000W? You will get very low efficiency. 750ti requires around 40W/card. Do not increase power limit in gpu's bios.
If I were you I would replace the MOBO. x1 PCIe slots has performance penalty because ccminer uses off GPU target checking, therefore you will get high PCIe load.

I'll stick with the 280x then, I can safely run three on 1000W?

Will add another PS for additional cards ...

Reggie0

member

Activity: 107

Merit: 13

Quote from: utahjohn on September 24, 2014, 04:50:57 PM

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

1000W? You will get very low efficiency. 750ti requires around 40W/card. Do not increase power limit in gpu's bios.
If I were you I would replace the MOBO. x1 PCIe slots has performance penalty because ccminer uses off GPU target checking, therefore you will get high PCIe load.

utahjohn

hero member

Activity: 630

Merit: 500

Anyone seen the new single card slot 750ti's on market yet?
I'm thinking of going six 750ti, will 1000W PS be good enough?

Yeehah won it on ebay
HTPC Barebones - MOBO/RAM/CPU - Asrock H81 PRO BTC/G3220 3GHZ/4GB 1600 DDR3

$75+11.99 shipping

utahjohn

hero member

Activity: 630

Merit: 500

Quote from: cryptonit on September 24, 2014, 04:40:51 PM

Quote from: utahjohn on September 24, 2014, 03:55:52 PM

@cryptonit
Any problems using non UEFI GPU's on Asrock H81 Pro BTC? (I have a backup of original bioses for the cards which had UEFI)

i didnt even know there is a issue existing regarding uefi

but i think the mainboard have a legacy boot modus too or?

i didnt care about ani uefi stuff and had no issues
but i didnt use any bios mods on cards

Thx, looks like I'll win bid at a decent price

15 min to go ...

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

Quote from: utahjohn on September 24, 2014, 03:55:52 PM

@cryptonit
Any problems using non UEFI GPU's on Asrock H81 Pro BTC? (I have a backup of original bioses for the cards which had UEFI)

i didnt even know there is a issue existing regarding uefi

but i think the mainboard have a legacy boot modus too or?

i didnt care about ani uefi stuff and had no issues
but i didnt use any bios mods on cards

utahjohn

hero member

Activity: 630

Merit: 500

@cryptonit
Any problems using non UEFI GPU's on Asrock H81 Pro BTC? (I have a backup of original bioses for the cards which had UEFI)

chris_dmd

newbie

Activity: 57

Merit: 0

Quote from: chris_dmd on September 24, 2014, 01:55:03 AM

Quote from: utahjohn on September 24, 2014, 12:18:39 AM

Looks like all 4 connect= nodes operational again

Yes, I have four. I will see what happens tomorrow when I purchase more and send them to my wallet from the exchange.

Happened again, sent coins to my wallet from Cryptsy this time.. Dropped the forth connection but this time picked it up again straight away, but..

Then it dropped out of sync and says it's sitting 5 blocks behind? Very strange behavior.

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

if some people wonder about strange tiny DMD amounts incoming to ur wallet
it might be u are a cloudmining investor and we do some tests Cool

danbi

sr. member

Activity: 393

Merit: 250

Quote from: pallas on September 24, 2014, 01:02:31 PM

Is the block explorer working fine? I can't seem to find the latest transactions of my address.

The current block explorer is struck on an invalid PoW chain. It should unstuck when PoW starts, but I decided to use the situation to start a new one.. Soon will be available.

You could inspect the block chain with the Block Crawler at http://dmdpool.digsys.bg/bc/

chris_dmd

newbie

Activity: 57

Merit: 0

Quote from: cryptonit on September 24, 2014, 04:49:35 AM

Quote from: chris_dmd on September 24, 2014, 02:07:19 AM

I just brought one of those little GAW miners figured id point it at the multi pool. Should be here by next week.

fact is longterm the same amount of cash invested into DMD cloudmining would have gave ya more DMD
because DMD cloudmining hashpower increase for free and u pay no maintainance at all

i would love if u keep track how much $ u invested in ur miner and how many DMD u earned
and then we compare in a year what the same investment in DMD cloudmining
would have generated for u and continue to generate

I brought the miner from trade me for $46 NZ and it says it mines scrypt at 1.3MH. I'll tell you when it gets here and I switch it on you will be able too see the stats on the multi pool page.

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Is the block explorer working fine? I can't seem to find the latest transactions of my address.

Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 693. (Read 1260677 times)