[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 813.

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

Quote from: johndec2 on May 16, 2014, 02:51:28 AM

Would someone from the dev team like to answer the question? It's not really all that difficult to clarify I would imagine. The 400,000th coin should be minted in about a week. I'm guessing that blocks are ahead of money supply due to a fork earlier in the coins life when some blocks got skipped. I've seen it happen before.

Quote from: Kloks on May 15, 2014, 11:46:27 AM

Quote from: djm34 on May 15, 2014, 08:24:57 AM

Quote from: Kloks on May 15, 2014, 08:16:34 AM

Quote from: johndec2 on May 15, 2014, 07:24:14 AM

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

As I understood from the first post, POS will start when money supply will be more then 400 000 DMD.

Not after 400 000 block.

good one

Can you explain the difference ?

result of the - getinfo command in the wallet:

.....
"blocks" : 403436,
"moneysupply" : 387564.87036400,
.....

Looks like some blocks cost less then 1 dmd. Maybe it was in the first version of Diamond.

in the past of the coin there was a time with pos 1% active and created a lot below 1DMD blocks
thats the reason why total coins isnt sync to blocknumber.

in fact staking happens already but not successful creating rewards
this will be addressed in next wallet release.

every coin u have in ur wallets gather coin-age each day
with next wallet release u will be able convert that coin-age into POS rewards (=minting)

we have a testnet running where we already runing on a wallets that did run through a few code reviews and code adaptions

for now it looks good but we wont release it until further testing is done

one forced early release did hurt us enough
we have no need to release update wallet early and untested

network as it is now run stable and smooth
mining works pool mining works transactions are fast and secure

next release will polish code in lot areas but mainly focus on POS which is the core mechanism of diamond evolution

johndec2

sr. member

Activity: 350

Merit: 250

Would someone from the dev team like to answer the question? It's not really all that difficult to clarify I would imagine. The 400,000th coin should be minted in about a week. I'm guessing that blocks are ahead of money supply due to a fork earlier in the coins life when some blocks got skipped. I've seen it happen before.

Quote from: Kloks on May 15, 2014, 11:46:27 AM

Quote from: djm34 on May 15, 2014, 08:24:57 AM

Quote from: Kloks on May 15, 2014, 08:16:34 AM

Quote from: johndec2 on May 15, 2014, 07:24:14 AM

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

As I understood from the first post, POS will start when money supply will be more then 400 000 DMD.

Not after 400 000 block.

good one

Can you explain the difference ?

result of the - getinfo command in the wallet:

.....
"blocks" : 403436,
"moneysupply" : 387564.87036400,
.....

Looks like some blocks cost less then 1 dmd. Maybe it was in the first version of Diamond.

mig6r

sr. member

Activity: 826

Merit: 250

Quote from: cryptonit on May 15, 2014, 03:09:49 PM

Quote from: mig6r on May 15, 2014, 01:17:49 PM

Hello
I'm trying to mine (dmdpool) with sph sgminer and -k groestlcoin doesn't work.
What is the secret ?

example for AMD280:

sgminer.exe -k groestlcoin -o http://dmdpool.digsys.bg:3345 -u cryptonit.2 -p 2 --gpu-engine 1100 --gpu-memclock 1100 --xintensity 300 -g 1 --thread-concurrency 8192 --difficulty-multiplier 0.0039062500 -w 256 --lookup-gap 0

Many thanks, it's ok !

srcxxx

sr. member

Activity: 266

Merit: 250

Hi!

What does foundation compatible mean?

I tried to read the link below, but it is 47th page about Summer Coin. No mention of "foundation".

Does it mean that from every 1 DMD that is mined on a pool, pool needs to send 5% to foundation?
If yes, then it means 1% pool will actually be 6% for miners, no?

PS: I'm looking into this while trying to figure out why my pool doesn't work. It breaks here:

Quote from: cryptonit on May 03, 2014, 02:32:07 PM

Quote from: ?? on ??

Tried compiling from github, no dice here either... If they can fix the code, we will add the coin to RejectMining.com

we did just compile a diamondd for linux
poolowner who wana betatest it send me PM

i need one for my p2pool but would be nice to compile it myself.
How to fix the code ?

source updated https://github.com/pitdmd/DMD_Pit

precompiled linux diamondd headless wallet https://mega.co.nz/#!XI5QlAzJ!xKD4JtMLpJPAGdf0rAmiwARkZfdYRAO9fE3BcL71NAU

please keep in mind pool need custom stratum u need to be groestl combatible stratum
and u need to be foundation share compatible

here some point to start researching regarding needed foundation stratum changes
only interesting for people who setup a pool https://bitcointalk.org/index.php?topic=581065.920

regarding groestl stratum changes please pool owner with already running groestlpool share their knowledge

WITHOUT FIXED STRATUM POOLS WONT GET ACCEPTED BLOCKS!

HR

legendary

Activity: 1176

Merit: 1011

Transparency & Integrity

Quote from: danbi on May 15, 2014, 12:24:09 AM

Quote from: kyma on May 14, 2014, 09:46:33 PM

So I have a DMD deposit that never arrived in my wallet... was there a blockchain switchover/fork or something?

I have tried to sync my wallet on both mac and PC but the DMD are not showing up in my account

I tried the block explorer for the txid ....returned null values Huh

address: dcA2zFYYgvaWBaNBCb1UdLErGfdGtq6MSy
txid: e36a5d96352fb178bd9b2485ac922a1e3c847cde3d3c61224fe86ee910183b50

Thoughts? Any feedback would be appreciated!

The Diamond block chain has struck due to an attack. It was decided to prematurely fork it and switch to Groestl hashing at that point. Surely, a lot of transactions have been canceled and some mined blocks too (I know to have mined two blocks myself during that time, that got orphaned).

Your DMDs are (back) at Criptsy's wallet. You should open a case with them to have the coins returned to your balance. Or, they should demonstrate where that transaction went..

I have almost the exact same issue (with only a slight difference in time and quantity of coins) with a support ticket that was opened soon after on April 29 whose status is still "Being Processed".

I have tried all three methods outlined in this support doc
https://cryptsy.freshdesk.com/support/solutions/articles/170993-3-methods-for

With both the new 2.0.1 wallet as well as the old 1.0.4 client.

All without success, and Cryptsy is apprised.

srcxxx

sr. member

Activity: 266

Merit: 250

Quote from: danbi on May 15, 2014, 12:19:53 AM

Quote from: srcxxx on May 14, 2014, 07:37:07 PM

It was my 7th attempt to set up a Diamond mining pool.

It failed again.

I ask Diamond devs or danbi for help.

NOMP always says "Daemon instance 0 rejected a supposedly valid block".

I have the latest NOMP source, I have compiled 2.0.1 daemon from your repo myself and even redownloaded the complete blockchain (instead of using your Original.rar).
Nothing helps.

Also, please note that only the single pool is working. No other pools are operating. They have 0 miners.

So I recommend that you look into this issue to avoid some 51% or timewarping attacks on your blockchain.

Thank you

I am rather busy this week with other stuff, and don't visit very often here.

But, as the Diamond team people were repeatedly telling me in this thread while I was combating it, "are your blocks foundation compatible?" Cheesy

That is, do you send 0.05 DMD to the DMD contribution address with each block?
What are your wallet log files showing? That is, whatever the reason for the reject, it *is* listed there.

I hope to be able to help with more issues soon.

Hi danbi!

Thank you for your help again.

This is what I'm getting in debug.log:

Quote

05/15/14 03:54:37 received block 0000000003d0ac2948ef
05/15/14 03:54:37 pindexBest = 388054pindexBest = 388054ERROR: AcceptBlock() : rejected by synchronized checkpoint
05/15/14 03:54:37 ERROR: ProcessBlock() : AcceptBlock FAILED

Also, what's the deal with 0.05 DMD? How do I do that?
Add a 0.5% fee in nomp pool config? If yes, what's the address?

Your help is much appreciated.

Thanks!

cryptonit

legendary

Activity: 3052

Merit: 1053

bit.diamonds | uNiq.diamonds

Quote from: mig6r on May 15, 2014, 01:17:49 PM

Hello
I'm trying to mine (dmdpool) with sph sgminer and -k groestlcoin doesn't work.
What is the secret ?

example for AMD280:

sgminer.exe -k groestlcoin -o http://dmdpool.digsys.bg:3345 -u cryptonit.2 -p 2 --gpu-engine 1100 --gpu-memclock 1100 --xintensity 300 -g 1 --thread-concurrency 8192 --difficulty-multiplier 0.0039062500 -w 256 --lookup-gap 0

mig6r

sr. member

Activity: 826

Merit: 250

Hello
I'm trying to mine (dmdpool) with sph sgminer and -k groestlcoin doesn't work.
What is the secret ?

Kloks

newbie

Activity: 21

Merit: 0

Quote from: djm34 on May 15, 2014, 08:24:57 AM

Quote from: Kloks on May 15, 2014, 08:16:34 AM

Quote from: johndec2 on May 15, 2014, 07:24:14 AM

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

As I understood from the first post, POS will start when money supply will be more then 400 000 DMD.

Not after 400 000 block.

good one

Can you explain the difference ?

result of the - getinfo command in the wallet:

.....
"blocks" : 403436,
"moneysupply" : 387564.87036400,
.....

Looks like some blocks cost less then 1 dmd. Maybe it was in the first version of Diamond.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: Kloks on May 15, 2014, 08:16:34 AM

Quote from: johndec2 on May 15, 2014, 07:24:14 AM

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

As I understood from the first post, POS will start when money supply will be more then 400 000 DMD.

Not after 400 000 block.

good one

Can you explain the difference ?

Kloks

newbie

Activity: 21

Merit: 0

Quote from: johndec2 on May 15, 2014, 07:24:14 AM

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

As I understood from the first post, POS will start when money supply will be more then 400 000 DMD.

Not after 400 000 block.

johndec2

sr. member

Activity: 350

Merit: 250

Looks like the devs need to clarify the situation? Is it 30 days after block 400,000 or is it 30 days after minting (pre or post algo change) ?

NoxX

sr. member

Activity: 462

Merit: 252

Quote from: Jarski on May 15, 2014, 04:48:38 AM

Quote from: johndec2 on May 15, 2014, 02:30:34 AM

Just curious. Has anyone seen any staking yet? My coins aren't old enough but I'm sure there are plenty of people here with coins over 30 days old that should be seeing something.

Didn't staking start on 400000th block? So it staking should start after 30 days more or less. Latest block was 404242.

That was my question too, I thought that staking was enabled once we hit 400000, but then for all the older blocks too. Within blocks 1 - 399999 there are many that are older than 30 days, they should stake already...

Jarski

newbie

Activity: 16

Merit: 0

Quote from: johndec2 on May 15, 2014, 02:30:34 AM

Just curious. Has anyone seen any staking yet? My coins aren't old enough but I'm sure there are plenty of people here with coins over 30 days old that should be seeing something.

Didn't staking start on 400000th block? So it staking should start after 30 days more or less. Latest block was 404242.

Cryptoinn

full member

Activity: 190

Merit: 100

Quote from: johndec2 on May 15, 2014, 02:30:34 AM

Just curious. Has anyone seen any staking yet? My coins aren't old enough but I'm sure there are plenty of people here with coins over 30 days old that should be seeing something.

My coins are fine, they all(300 coins) was mined in past 3 days, partialy solded at crypsy and some saved in wallet for PoS.

johndec2

sr. member

Activity: 350

Merit: 250

Just curious. Has anyone seen any staking yet? My coins aren't old enough but I'm sure there are plenty of people here with coins over 30 days old that should be seeing something.

danbi

sr. member

Activity: 393

Merit: 250

Quote from: kyma on May 14, 2014, 09:46:33 PM

So I have a DMD deposit that never arrived in my wallet... was there a blockchain switchover/fork or something?

I have tried to sync my wallet on both mac and PC but the DMD are not showing up in my account

I tried the block explorer for the txid ....returned null values Huh

address: dcA2zFYYgvaWBaNBCb1UdLErGfdGtq6MSy
txid: e36a5d96352fb178bd9b2485ac922a1e3c847cde3d3c61224fe86ee910183b50

Thoughts? Any feedback would be appreciated!

The Diamond block chain has struck due to an attack. It was decided to prematurely fork it and switch to Groestl hashing at that point. Surely, a lot of transactions have been canceled and some mined blocks too (I know to have mined two blocks myself during that time, that got orphaned).

Your DMDs are (back) at Criptsy's wallet. You should open a case with them to have the coins returned to your balance. Or, they should demonstrate where that transaction went..

danbi

sr. member

Activity: 393

Merit: 250

Quote from: srcxxx on May 14, 2014, 07:37:07 PM

It was my 7th attempt to set up a Diamond mining pool.

It failed again.

I ask Diamond devs or danbi for help.

NOMP always says "Daemon instance 0 rejected a supposedly valid block".

I have the latest NOMP source, I have compiled 2.0.1 daemon from your repo myself and even redownloaded the complete blockchain (instead of using your Original.rar).
Nothing helps.

Also, please note that only the single pool is working. No other pools are operating. They have 0 miners.

So I recommend that you look into this issue to avoid some 51% or timewarping attacks on your blockchain.

Thank you

I am rather busy this week with other stuff, and don't visit very often here.

But, as the Diamond team people were repeatedly telling me in this thread while I was combating it, "are your blocks foundation compatible?" Cheesy

That is, do you send 0.05 DMD to the DMD contribution address with each block?
What are your wallet log files showing? That is, whatever the reason for the reject, it *is* listed there.

I hope to be able to help with more issues soon.

kyma

sr. member

Activity: 479

Merit: 250

So I have a DMD deposit that never arrived in my wallet... was there a blockchain switchover/fork or something?

I have tried to sync my wallet on both mac and PC but the DMD are not showing up in my account

I tried the block explorer for the txid ....returned null values Huh

address: dcA2zFYYgvaWBaNBCb1UdLErGfdGtq6MSy
txid: e36a5d96352fb178bd9b2485ac922a1e3c847cde3d3c61224fe86ee910183b50

Thoughts? Any feedback would be appreciated!

srcxxx

sr. member

Activity: 266

Merit: 250

It was my 7th attempt to set up a Diamond mining pool.

It failed again.

I ask Diamond devs or danbi for help.

NOMP always says "Daemon instance 0 rejected a supposedly valid block".

I have the latest NOMP source, I have compiled 2.0.1 daemon from your repo myself and even redownloaded the complete blockchain (instead of using your Original.rar).
Nothing helps.

Also, please note that only the single pool is working. No other pools are operating. They have 0 miners.

So I recommend that you look into this issue to avoid some 51% or timewarping attacks on your blockchain.

Thank you

Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 813. (Read 1260706 times)