Hi all, I found that there is a fallacy in recent version's of Parity in handling small block gas limit when mining. So please temporarily downgrade your Parity client version to v1.4.4 (https://github.com/paritytech/parity/releases/tag/v1.4.4) or lower. You can do this by uninstalling your existing Parity version and then reinstalling v1.4.4.
All client versions should function without any problem on Ellaism. However, by temporarily downgrading to v1.4.4 or lower when mining, the network will stabilize faster and you can start to send transactions sooner.
Topic: [ANN] Ellaism: Ethereum network with no premine and no contentious hard forks - page 92. (Read 118874 times)
September 11, 2017, 11:50:22 PM
September 11, 2017, 11:26:47 PM
Started Parity "parity --author (my address) --chain ellaism.json". Starting Ethminer-CUDA 0.9.41 "ethminer -U -F 127.0.0.1:8545". It doesn't even create DAG, showing me this: 
. What am I doing wrong?
. What am I doing wrong? September 11, 2017, 11:15:57 PM
Don't take me wrong , i am kind of newbie .
Can someone tell me how to mine this coin?
I tried a lot of options . But i am missing something. i get Jason error , and other few
I used parity to get wallet address , after that what to do ?
Can someone tell me how to mine this coin?
I tried a lot of options . But i am missing something. i get Jason error , and other few
I used parity to get wallet address , after that what to do ?
September 11, 2017, 11:01:58 PM
No premine is good altcoin for community. How much total supply your coin dev?
And where to listing on exchanges in the future? This like ethereum network? Glad to heard it.
And where to listing on exchanges in the future? This like ethereum network? Glad to heard it.
I updated the post about this information. The total supply will not exceed 280 million Ella. You can get an idea about the inflation from this image: http://ellaism.org/images/total-supply.png
How to send coins? I got error "Transaction cost exceeds current gas limit. Limit: 5057, got: 940000. Try decreasing supplied gas."
The limit is 5057, but not less than 21000 gas. Here and how to understand this?
The limit is 5057, but not less than 21000 gas. Here and how to understand this?
This currently needs to wait for a little bit before the block gas limit raises above 21000. Limit raises on every block mined, but it may take some time.
September 11, 2017, 08:40:24 PM
Can I use an ETH adress and mine while Parity is running ?
Thanks !
yes Thanks !
September 11, 2017, 07:25:54 PM
Can I use an ETH adress and mine while Parity is running ?
Thanks !
Thanks !
September 11, 2017, 06:51:20 PM
start.bat in folder parity
"parity --author (your address) --chain ellaism.json --stratum --stratum-interface=0.0.0.0 --stratum-port=4200"
mine.bat in folder ethminer for stratum
"ethminer -U -S 127.0.0.1:4200"
for getwork
"ethminer -U -F 127.0.0.1:8545"
Give me youre address to donation."parity --author (your address) --chain ellaism.json --stratum --stratum-interface=0.0.0.0 --stratum-port=4200"
mine.bat in folder ethminer for stratum
"ethminer -U -S 127.0.0.1:4200"
for getwork
"ethminer -U -F 127.0.0.1:8545"
Thanks dude!
September 11, 2017, 06:27:21 PM
September 11, 2017, 06:23:20 PM
How to import account to parity wallet?
September 11, 2017, 06:04:45 PM
Hi everyone. I can't connect to any peer. What I need to do to fix it?
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
Удaли из тpeя ptray.exe, coздaй бaтник c тaким coдepжaниeм "parity --author (тyт твoй aдpec) --chain ellaism.json" в пaпкe c ycтaнoвлeнным кoшeлькoм.
ellaism.json нe пpaвил?
Eщё тyт пocмoтpи https://github.com/paritytech/parity/wiki/Network-Configuration мoжeт пpoвaйдep блoкиpyeт.
September 11, 2017, 05:47:46 PM
Hi everyone. I can't connect to any peer. What I need to do to fix it?
Удaли из тpeя ptray.exe, coздaй бaтник c тaким coдepжaниeм "parity --author (тyт твoй aдpec) --chain ellaism.json" в пaпкe c ycтaнoвлeнным кoшeлькoм.
ellaism.json нe пpaвил?
Eщё тyт пocмoтpи https://github.com/paritytech/parity/wiki/Network-Configuration мoжeт пpoвaйдep блoкиpyeт.
September 11, 2017, 05:40:24 PM
Hi everyone. I can't connect to any peer. What I need to do to fix it?
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
Удaли из тpeя ptray.exe, coздaй бaтник c тaким coдepжaниeм "parity --author (тyт твoй aдpec) --chain ellaism.json" в пaпкe c ycтaнoвлeнным кoшeлькoм.
September 11, 2017, 05:24:46 PM
Hi everyone. I can't connect to any peer. What I need to do to fix it?
Удaли из тpeя ptray.exe, coздaй бaтник c тaким coдepжaниeм "parity --author (тyт твoй aдpec) --chain ellaism.json" в пaпкe c ycтaнoвлeнным кoшeлькoм.
September 11, 2017, 05:20:24 PM
How to send coins? I got error "Transaction cost exceeds current gas limit. Limit: 5057, got: 940000. Try decreasing supplied gas."
The limit is 5057, but not less than 21000 gas. Here and how to understand this?
The limit is 5057, but not less than 21000 gas. Here and how to understand this?
September 11, 2017, 04:47:58 PM
No premine is good altcoin for community. How much total supply your coin dev?
And where to listing on exchanges in the future? This like ethereum network? Glad to heard it.
And where to listing on exchanges in the future? This like ethereum network? Glad to heard it.
September 11, 2017, 04:46:16 PM
Hi everyone. I can't connect to any peer. What I need to do to fix it?
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
https://image.prntscr.com/image/FhOL3cErQCaTovHOCxRJPQ.png
September 11, 2017, 04:43:36 PM
I am running like this with parity address
parity --author "parity address" --chain ellaism.json
Thank you once again. How to see the stats and where rewards are going?
Open link in chrome
http://127.0.0.1:8180/#/accounts
September 11, 2017, 04:18:53 PM
Remove the parity from tray. Is the Author address ETH address?
"Starting it
You'll probably want to set the destination address (where the rewards go). If you have an address already, great. If you don't, then you can make one in Parity with:
parity account new
You'll be asked for a password and be given an address. Once done, you should run parity and tell it to mine to that address when required. Supposing your address is 0037a6b811ffeb6e072da21179d11b1406371c63, then you would run:
parity --author 0037a6b811ffeb6e072da21179d11b1406371c63
Once Parity is running and synced with the network, you can start your miner of choice. For genoil, command would be:
ethminer -G
Where -G for GPU mining (opencl)"
In general, you can use any ethereum-based address.
I am running like this with parity address
parity --author "parity address" --chain ellaism.json
Thank you once again. How to see the stats and where rewards are going?
September 11, 2017, 04:09:46 PM
Yeah but I don't get it, what is the point of creating this clone? It doesn't seem to bring enough to the table to be worth a whole seperate coin.
September 11, 2017, 04:00:24 PM
Remove the parity from tray. Is the Author address ETH address?
"Starting it
You'll probably want to set the destination address (where the rewards go). If you have an address already, great. If you don't, then you can make one in Parity with:
parity account new
You'll be asked for a password and be given an address. Once done, you should run parity and tell it to mine to that address when required. Supposing your address is 0037a6b811ffeb6e072da21179d11b1406371c63, then you would run:
parity --author 0037a6b811ffeb6e072da21179d11b1406371c63
Once Parity is running and synced with the network, you can start your miner of choice. For genoil, command would be:
ethminer -G
Where -G for GPU mining (opencl)"
In general, you can use any ethereum-based address.
Jump to: