Yes, would be nice.
With the 7950 I got 1,9 Mhs for a short time. But not stable.
GPU get sick/dead after a few mins @ I 18 and stock stats.
Topic: ⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 500. (Read 924226 times)
July 10, 2016, 06:45:43 PM
July 10, 2016, 06:32:03 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks.
i get 360kH/s with my R9 270, are my numbers low too?
...and I thought these stats are good
If you post the walkthrough I´ll try it.
I'm curious about it.
If you post the walkthrough I´ll try it.
I'm curious about it.
Sorry guys, I mistyped. Just referenced with Wolf's machine now - he's getting 2.74 Mh/s on a 280X, and the 7950 is pulling in 2.4 Mh/s.
Still a little low, but not terrible. I'll write up a guide and PM you both, if you'd like, to notify you.
Like I said - not at my machine to go through the steps, can only access SSH + this forum, but once I am tomorrow I'll do a step-by-step. Potentially with screenshots. Woo, screenshots!
July 10, 2016, 06:17:29 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 10 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks.
i get 360kH/s with my R9 270, are my numbers low too?
July 10, 2016, 06:14:19 PM
...and I thought these stats are good
If you post the walkthrough I´ll try it.
I'm curious about it.
If you post the walkthrough I´ll try it.
I'm curious about it.
July 10, 2016, 06:12:23 PM
espers will soon be worth dogetoshis
I'm sorry, I don't speak shithead. Can someone translate?
July 10, 2016, 06:06:28 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks.
July 10, 2016, 06:02:50 PM
Wow 
Miners have already been compiled for windows
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
July 10, 2016, 05:49:52 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.
7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs
On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.
July 10, 2016, 05:41:37 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
July 10, 2016, 05:37:16 PM
someone can compile for windows
Miners have already been compiled for windows
Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<
and the new one is >>>HERE<<<
July 10, 2016, 05:29:40 PM
I have compiled in Windows, but whan I start over bat it writes pause and than it exits. Any clue about this?
July 10, 2016, 05:25:32 PM
I FINNALY got it:
[19:24:21] * using Jansson 2.7
[19:24:21] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[19:24:21] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[19:24:21] Probing for an alive pool
[19:24:25] Startup GPU initialization... Using settings from pool esp.suprnova.c
c.
[19:24:25] Startup Pool No = 0
[19:24:25] Building binary wolf-espPitcairngw256l8lg2tc8896nf10.bin
[19:24:25] Unable to open wolf-esp.cl for reading!
[19:24:25] Failed to init GPU thread 0, disabling device 0
[19:24:25] Restarting the GPU from the menu will not fix this.
[19:24:25] Re-check your configuration and try restarting.
Press enter to continue:
i used this command:
sgminer -k wolf-esp --url stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x
and this too:
sgminer --kernelfile wolf-esp --url stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x
[19:24:21] * using Jansson 2.7
[19:24:21] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[19:24:21] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[19:24:21] Probing for an alive pool
[19:24:25] Startup GPU initialization... Using settings from pool esp.suprnova.c
c.
[19:24:25] Startup Pool No = 0
[19:24:25] Building binary wolf-espPitcairngw256l8lg2tc8896nf10.bin
[19:24:25] Unable to open wolf-esp.cl for reading!
[19:24:25] Failed to init GPU thread 0, disabling device 0
[19:24:25] Restarting the GPU from the menu will not fix this.
[19:24:25] Re-check your configuration and try restarting.
Press enter to continue:
i used this command:
sgminer -k wolf-esp --url stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x
and this too:
sgminer --kernelfile wolf-esp --url stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x
July 10, 2016, 05:18:25 PM
espers will soon be worth dogetoshis
July 10, 2016, 05:17:55 PM
someone can compile for windows
July 10, 2016, 05:10:08 PM
Can somebody help me about creating a Config file to the Wolf sgminer ??
July 10, 2016, 05:03:17 PM
why post old sgminer 
omg lol
omg lol
IDK... Maybe in case some people still have issues with the wolfminer?
EDIT: Wolfminer source now re-uploaded with new bins: https://github.com/CryptoCoderz/sgminer-wolf
will this work on an HD 6450?
Maby (if you're lucky) I have a MSI 6570 and It works...(sorta) It gives me a standard rate of +- 60-KHS on an --intensity 10 setting, so yeah -
try it. Just be careful you don't wanna burn the card out!
July 10, 2016, 04:51:32 PM
i started without a "configuration file", and i didn't have success, probably because of the Algo:
https://i.imgsafe.org/2c3192b00d.png
https://i.imgsafe.org/2c3192b00d.png
July 10, 2016, 04:48:57 PM
I'll stuck to mining with my CPU for the time being... besides my gpu is hardly 2x faster than my 1 cpu thread... So all I need is 2 threads (I have a quad-core)
July 10, 2016, 03:57:13 PM
Somebody knows how to install the "AMD APP SDK" on Ubuntu?
edit: i'm trying reading this http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/AMD_APP_SDK_InstallationNotes.pdf
edit again: i think i did the installation
edit again: but still dificult at the compiling part
edit again: i did the installation of the sgminer-wolf but now i don't know how to start it, and i don't know whats the .BAT file of the linux to put the config
edit: i'm trying reading this http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/AMD_APP_SDK_InstallationNotes.pdf
edit again: i think i did the installation
edit again: but still dificult at the compiling part
edit again: i did the installation of the sgminer-wolf but now i don't know how to start it, and i don't know whats the .BAT file of the linux to put the config
July 10, 2016, 03:46:14 PM
why post old sgminer
omg lol
omg lol
IDK... Maybe in case some people still have issues with the wolfminer?
EDIT: Wolfminer source now re-uploaded with new bins: https://github.com/CryptoCoderz/sgminer-wolf
will this work on an HD 6450?
Jump to: