[ANN] Ethereum: Welcome to the Beginning - page 955.

NanoPipe

newbie

Activity: 31

Merit: 0

Quote from: tuvok007 on April 17, 2016, 01:15:51 PM

Today when I was reading my local net portal that is not IT nor crypto related but mainstream and I saw non paid article about Ethereumhttp://www.novilist.hr/Znanost-i-tehnologija/Tehnologija/Ethereum-buducnost-interneta-ili-poligon-za-spekulante there I almost drop my pants. This is amazing.

That is good for the adoption of Ethereum. Maybe the Ethereum will be more used than the bitcoin in the future.

kprell40

hero member

Activity: 546

Merit: 500

CLD added Ethereum to there mining list

you can mine ETH now. if you don't have your rig .

https://cldmine.com/?ref=150507

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Yeah, Eth is poised to be Bitcoin 3.0. We'll see.
The small up and down swings of the price are the usual 'traders' profiting by pumping and dumping like with stocks. Never believe anything people's post or say online. Do your own due diligence, read accredited articles and see who is involved with the coin.

This is the only thing out there right now that has a remote chance of being ,something' . If it goes where people's think, expect and hope it will, it'll make a lot of smart people's very rich in the next year.

tuvok007

legendary

Activity: 1358

Merit: 1001

Today when I was reading my local net portal that is not IT nor crypto related but mainstream and I saw non paid article about Ethereumhttp://www.novilist.hr/Znanost-i-tehnologija/Tehnologija/Ethereum-buducnost-interneta-ili-poligon-za-spekulante there I almost drop my pants. This is amazing.

RayX12

hero member

Activity: 952

Merit: 552

Quote from: thedreamer on April 17, 2016, 10:52:32 AM

Quote from: estenity on April 17, 2016, 09:24:38 AM

good progression of ETH price today to 0.022, with good volume (50 % of BTC) Grin

Yeah. News hasn't hit yet even.. Wink

Typical sell on the news then? Grin

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Quote from: estenity on April 17, 2016, 09:24:38 AM

good progression of ETH price today to 0.022, with good volume (50 % of BTC) Grin

Yeah. News hasn't hit yet even.. Wink

estenity

hero member

Activity: 1928

Merit: 538

good progression of ETH price today to 0.022, with good volume (50 % of BTC) Grin

fmz89

legendary

Activity: 1762

Merit: 1002

Quote from: malekbaba on April 17, 2016, 06:19:08 AM

Quote from: Maicol792 on April 17, 2016, 03:38:02 AM

Hello, i have on question, i mining eth with 2 PC on suprnova one r9 270x and one r9 290x ..and i have near 45 mhs ... 15 + 30 mhs ...
now on eth mining profit calculator i have this results:
X Hours: 0,029
X Day: 0,69
X week: 4,89

But my real production on suprnova.cc is:

X Hours: 0,020
X Day: 0,397
X week: 2,19

Why? My near 45 mhs are unstable? Where i have the problem?

Thanks

am getting 0.25 ETH per day from 1 AMD 7950 that hashes @ 17-19mhashes

just one day mining on suprnova, is bad earning, stick with dwarfpool is the best

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Because suprnova underpays or steals shares, who knows. During my tests a few weeks ago it paid consistently 30% less than ethermine.org or ethpool.org even did.

malekbaba

legendary

Activity: 1526

Merit: 1026

Quote from: Maicol792 on April 17, 2016, 03:38:02 AM

Hello, i have on question, i mining eth with 2 PC on suprnova one r9 270x and one r9 290x ..and i have near 45 mhs ... 15 + 30 mhs ...
now on eth mining profit calculator i have this results:
X Hours: 0,029
X Day: 0,69
X week: 4,89

But my real production on suprnova.cc is:

X Hours: 0,020
X Day: 0,397
X week: 2,19

Why? My near 45 mhs are unstable? Where i have the problem?

Thanks

am getting 0.25 ETH per day from 1 AMD 7950 that hashes @ 17-19mhashes

Cateinyard

newbie

Activity: 41

Merit: 0

Quote from: arielbit on April 16, 2016, 08:31:38 PM

Quote from: IncludeBeer on April 16, 2016, 07:05:13 PM

Quote from: smaxz on April 16, 2016, 06:57:41 PM

lol so you thought the molex and usb slots on the riser board were for whatever option you felt like using?

|facepalm|

glad you sorted this one out.

that does sound like a low hashrate for your card configuration

well, the board has 2 4pin molex on it which I have connected to the PSU. Plus, those cards also have dedicated power from the PSU, so I figured connecting the power on the risers wouldn't really be needed.

Owell, lessons learned. Cheesy

lol, 16x slots have more power because some lanes in the 16 lanes are power source, that's why those 1x to 16x adapters needed an external power source going through that sata adapter.

maybe you can try claymore's dual ETH, DCR miner..i think you might like it Wink

All the +12V lanes are in the front PCIE1 part. There are 5 lanes in total. The +3.3V and 5V are in the x16.

Maicol792

legendary

Activity: 1260

Merit: 1010

Hello, i have on question, i mining eth with 2 PC on suprnova one r9 270x and one r9 290x ..and i have near 45 mhs ... 15 + 30 mhs ...
now on eth mining profit calculator i have this results:
X Hours: 0,029
X Day: 0,69
X week: 4,89

But my real production on suprnova.cc is:

X Hours: 0,020
X Day: 0,397
X week: 2,19

Why? My near 45 mhs are unstable? Where i have the problem?

Thanks

Roidz

sr. member

Activity: 1386

Merit: 250

1XBit.com

it's time to hold your eth Cool

IncludeBeer

legendary

Activity: 1164

Merit: 1010

Quote from: arielbit on April 16, 2016, 08:31:38 PM

Quote from: IncludeBeer on April 16, 2016, 07:05:13 PM

Quote from: smaxz on April 16, 2016, 06:57:41 PM

lol so you thought the molex and usb slots on the riser board were for whatever option you felt like using?

|facepalm|

glad you sorted this one out.

that does sound like a low hashrate for your card configuration

well, the board has 2 4pin molex on it which I have connected to the PSU. Plus, those cards also have dedicated power from the PSU, so I figured connecting the power on the risers wouldn't really be needed.

Owell, lessons learned. Cheesy

lol, 16x slots have more power because some lanes in the 16 lanes are power source, that's why those 1x to 16x adapters needed an external power source going through that sata adapter.

maybe you can try claymore's dual ETH, DCR miner..i think you might like it Wink

Already up and running! Grin

DirectDice

legendary

Activity: 1008

Merit: 1000

Tipsters Championship www.DirectBet.eu/Competition

Quote from: socks435 on April 16, 2016, 01:54:03 PM

Good new that directbet also can accept ethereum as a bet.. and i think it will adopted more in other gambling site.. and it will be more popular in the future.. are it will the same as litecoin and doge coin..

Hi socks435,

Thank you for your question.

Yes, everything works the same with Ether.

In addition to LIVE Sports Betting with your Ether you can also play our provably fair Direct Dice and All-In Poker Flips directly on the Ethereum blockchain !

We hope that you will all enjoy playing with Ether (ETH) at DirectBet.

All the Best,

Michelle

www.DirectBet.eu

Mrpumperitis

legendary

Activity: 2856

Merit: 1075

arielbit

legendary

Activity: 3444

Merit: 1061

Quote from: IncludeBeer on April 16, 2016, 07:05:13 PM

Quote from: smaxz on April 16, 2016, 06:57:41 PM

lol so you thought the molex and usb slots on the riser board were for whatever option you felt like using?

|facepalm|

glad you sorted this one out.

that does sound like a low hashrate for your card configuration

well, the board has 2 4pin molex on it which I have connected to the PSU. Plus, those cards also have dedicated power from the PSU, so I figured connecting the power on the risers wouldn't really be needed.

Owell, lessons learned. Cheesy

lol, 16x slots have more power because some lanes in the 16 lanes are power source, that's why those 1x to 16x adapters needed an external power source going through that sata adapter.

maybe you can try claymore's dual ETH, DCR miner..i think you might like it Wink

IncludeBeer

legendary

Activity: 1164

Merit: 1010

Quote from: smaxz on April 16, 2016, 06:57:41 PM

lol so you thought the molex and usb slots on the riser board were for whatever option you felt like using?

|facepalm|

glad you sorted this one out.

that does sound like a low hashrate for your card configuration

well, the board has 2 4pin molex on it which I have connected to the PSU. Plus, those cards also have dedicated power from the PSU, so I figured connecting the power on the risers wouldn't really be needed.

Owell, lessons learned. Cheesy

smaxz

sr. member

Activity: 430

Merit: 253

VeganAcademy

lol so you thought the molex and usb slots on the riser board were for whatever option you felt like using?

|facepalm|

glad you sorted this one out.

that does sound like a low hashrate for your card configuration

IncludeBeer

legendary

Activity: 1164

Merit: 1010

Quote from: arielbit on April 16, 2016, 12:09:24 AM

Quote from: IncludeBeer on April 15, 2016, 11:32:20 PM

Quote from: arielbit on April 15, 2016, 10:56:55 PM

Quote from: IncludeBeer on April 15, 2016, 10:03:58 PM

Quote from: thedreamer on April 15, 2016, 02:53:37 PM

Quote from: IncludeBeer on April 15, 2016, 01:53:03 PM

Ok, thanks for the confirmation. I first tested it out with just one 390x connected via 16x riser, and that worked great. Then, I installed TeamViewer, shut down, connected the other GPUs via 1x-16x risers, and restarted (without a monitor plugged in. I thought I could just then use TeamViewer to connect and start up the mining software). After work, I'll try restarting again but with a monitor connected during bootup to see if the other GPUs get started.

I've got 2x 1000w platinum PSUs to power the 6 gpus. Should be enough. While testing though, I've only got the 3 connected with 1 of the PSU. I think 1000w is enough to power those 3 cards though...

No Prob.

The 390x's shoudl draw stock about 250watts each, the 280x's about 230watts or so. (as long as they are good quality cards).
'Most' 390x's you can undervolt and get back about 10-20% wattage, some more, some less.
I run all my 390's (non 'x') at 100mv undervolt, 1100/1500 settings (stock is 1015/1500) and they use 200-210watts each while getting around 29MH+ now.
Solo mining has been earning me 50% more than pool mining for the past week so I'm sticking to it. Some days I get 1, some days I get 5 blocks.

Well shit. So I got home, plugged in the monitor (with all 3 gpu's connected, 2 via 1x-16x risers), and booted. Still, only the one connected to the 16x pci slot powers on and is recognized. I've got the molex power connector on the mb plugged in, and all 3 gpus have dedicated power which I made sure what all connected. My PSU is an evga "supernova", so no issues with psu quality I think. I know it's not the gpu's because I swapped out one of the ones connected via the 1x-16x riser to the 16x-16x riser, and that one powers up just fine. Only the ones connected via 1x-16x. Anyone have tips for how to troubleshoot this?

Edit:
MB is an ASROCK H81 pro btc,
2x 280x are both Sapphire,
4x 390x are all MSI.

i'm using windows 7 64bit

1x to 16x risers

old 80gb hdd's , 2gb ddr2 RAMs

good old socket 775 cpu's and motherboards @ 4 cards each. all fine, i'm using only one monitor that i plug if remote access troubleshooting is not possible.

sometimes it is better to have at least two rigs, a few extra risers and a spare PSU that you are very sure that is 100% working. swapping components to compare and check to know what component have trouble.

from experience i've seen motherboards that cannot detect more than two or three GPU's (know that i'm using cheap old boards), there are two 1x to 16x risers here that makes my gpu's undetectable (this have been used for quite a while).

it is also good to have a GPU temperature monitoring software around. to know what card is heating more etc.

last day one of my miner hanged twice, unplugged my hottest card, found out the my high speed hydraulic fan is not smooth anymore (rotating) (from modded old sapphire 280x), removed the cover underneath the sticker, put some compressor oil (just lying around here) returned the cover, seal it with a piece of masking tape (fan fixed-smooth again)...... and reapply thermal paste to the card because it was already dry.. and the rig was fixed and mining again Cool

Ok, I'll try swapping out the risers. The ones I bought are here:

http://gpushack.com/collections/gpushack/products/gpushack-1x-16x-usb-riser

Otherwise, I know that my MB is a common one used for mining. It's part of the mining series ("Pro BTC") mb's from ASROCK. I guess I'll also try different pci slots to see if that makes a difference.

check the review at newegg of your "pro BTC" board Grin

, i think someone there have the same issues like yours Wink

http://www.newegg.com/Product/Product.aspx?Item=N82E16813157471&cm_re=Pro_BTC-_-13-157-471-_-Product

i don't like the design of your riser, the riser should be molex compatible, extension-adaptor wire can sometimes be a point of failure, and the usb wire is kind of short in length.

here is one of my rig. the motherboard is mining for me for about 2years now

newegg review or my board

a spare riser..

Ok, I figured out the problem: the USB risers I bought are powered, and they must be connected to power to work. I guess the USB riser part only takes power from the molex connector it comes with, not from PCI slot, so it has to be plugged in for the MB to even see that there's something in the pci slot. I now have 3 gpus hashing happily away! Cheesy

These are my first AMD gpus though. with latest genoil miner, i'm showing right around 68-69 mh/s (1x 390x & 2x 280x). I thought it would be higher than that...Anyone care to share a config that's better tweaked?

Topic: [ANN] Ethereum: Welcome to the Beginning - page 955. (Read 2007090 times)