[ANN] [HVC] Heavycoin - Ultra-secure, Decentralized Block Reward Voting, Fast - page 97.

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

Quote from: ?? on ??

Quote from: loicatraile on April 01, 2014, 04:06:37 AM

It´s good to increase the hash power but if everybody can increase it then is pointless and you will only increase power consumption .. so please hvc.1g stop updating the cgminer!

Precisely.

Huh? It's not "everybody". nVidia and CPU miners are not getting the increase by this cgminer update.
Do you want a cheap $150 nVidia card to hash as fast as a $350 AMD 280x? I certainly don't. Tongue

CitizenEra5ed

jr. member

Activity: 52

Merit: 36

I keep getting a lot of stratum disconnects on zhpool and losing shares. The dashboard is showing me as being at 25MH/s when it should be about135MH/s according to what cgminer is reporting to me.

I never noticed it before this latest cgminer update. Is anybody else seeing the same or is it something in my set up?

c

reorder

sr. member

Activity: 462

Merit: 250

Quote from: con on April 01, 2014, 04:57:46 AM

I'm getting around 24.8 from a 290@1125 and 4.3 from a 7750@950
Mem clocks are default. I can't seem to get anywhere near the 28MH reported. Running with 13.12 drivers and 14.3b ocl libs.

Try -w 64 -X 105

ibinsad

sr. member

Activity: 616

Merit: 250

with the new cgminer

and with 2 290 and 1 280x toxic i get 67Mh/s and have 480W total
temps from 50 to 67..
very low noise..

I did not tried x11 yet

I prefer to lower the hash , i can go up 78Mh/s but it will cost a lot in Watt !

con

newbie

Activity: 24

Merit: 0

I'm getting around 24.8 from a 290@1125 and 4.3 from a 7750@950
Mem clocks are default. I can't seem to get anywhere near the 28MH reported. Running with 13.12 drivers and 14.3b ocl libs.

g0re79

sr. member

Activity: 476

Merit: 250

I´ve got a picture! Haha!

Quote from: oinquer on April 01, 2014, 04:28:13 AM

Quote from: loicatraile on April 01, 2014, 04:06:37 AM

It´s good to increase the hash power but if everybody can increase it then is pointless and you will only increase power consumption .. so please hvc.1g stop updating the cgminer!

You maybe speak out the truth!
My happiness after increasing my hashpower has gone. Angry

Its better than some other guys squeezes AMD cards with new cgminer in secrecy. And at least we can fuck back all those 750ti noobs Cool

Just for note - hashrate incrase is +30% but power consumtion rised just by tiny 4%, so no big deal, here are results for my rig of 4* R9 280x at 1100 / 1500 (various brands, no voltage / BIOS optimalization at all):

cgminer v5 - 61MHs / 850W
cgminer v6 - 80MHs / 880W

oinquer

member

Activity: 94

Merit: 10

Quote from: loicatraile on April 01, 2014, 04:06:37 AM

It´s good to increase the hash power but if everybody can increase it then is pointless and you will only increase power consumption .. so please hvc.1g stop updating the cgminer!

You maybe speak out the truth!
My happiness after increasing my hashpower has gone. Angry

reorder

sr. member

Activity: 462

Merit: 250

Quote from: loicatraile on April 01, 2014, 04:06:37 AM

It´s good to increase the hash power but if everybody can increase it then is pointless and you will only increase power consumption .. so please hvc.1g stop updating the cgminer!

Nvidia guys had a better hashrate with their top cards than even 290, this cannot be tolerated

loicatraile

newbie

Activity: 56

Merit: 0

It´s good to increase the hash power but if everybody can increase it then is pointless and you will only increase power consumption .. so please hvc.1g stop updating the cgminer!

oinquer

member

Activity: 94

Merit: 10

Quote from: reorder on April 01, 2014, 03:54:49 AM

Quote from: Croak on April 01, 2014, 01:29:28 AM

On a happy note, new cgminer for HVC is a nice speed improvement, at the cost of extra power usage.

My rigs before

290x @1150Mhz -I8 25mh
290 @1150Mhz -I8 22mh
280x @1170Mhz -I8 16mh
270 @1150Mhz -I8 10mh
270 @ 1190Mhz -I8 11mh

My rigs now:

290x @1150Mhz -I8 31mh
290 @1150Mhz -I8 28mh
280x @1170Mhz -I8 22mh
270 @1150Mhz -I8 14mh
270 @ 1190Mhz -I8 15mh

EDIT: Just don't do what I did, and overwrite the batch file with my wallet address with the default one and mine for over an hour for somebody else at 300mh.

Consider that a donation to miner developer Wink

Much appreciated!

By the way, I'd suggest using '-w 64' and Catalyst versions 13.11 to latest for all AMD cards.

Me too. Donation to 1gh is a good idea.

samanuel2

newbie

Activity: 10

Merit: 0

Quote from: jakiman on April 01, 2014, 03:31:44 AM

Quote from: vortal on April 01, 2014, 03:23:06 AM

Do I need change the cgminer setup or just use the default one? I have hd 7950.

Just replace the cgminer with the new one.
There is no need to change anything else.

Quote from: TheIcky on April 01, 2014, 02:53:21 AM

I have tried many setting variations and I just cant get my Sapphire Tri-X over 14Mh. Anyone else having this problem?

280x? Try what I wrote in my previous message:

https://bitcointalksearch.org/topic/m.5992343

I can now get over 21MH/s with my 280x with the new 1GH cgminer.

Which driver do you use?
I had 16.10 mh/s with old cgminer. Now I have 18.10 mh/s Sad

reorder

sr. member

Activity: 462

Merit: 250

Quote from: Croak on April 01, 2014, 01:29:28 AM

On a happy note, new cgminer for HVC is a nice speed improvement, at the cost of extra power usage.

My rigs before

290x @1150Mhz -I8 25mh
290 @1150Mhz -I8 22mh
280x @1170Mhz -I8 16mh
270 @1150Mhz -I8 10mh
270 @ 1190Mhz -I8 11mh

My rigs now:

290x @1150Mhz -I8 31mh
290 @1150Mhz -I8 28mh
280x @1170Mhz -I8 22mh
270 @1150Mhz -I8 14mh
270 @ 1190Mhz -I8 15mh

EDIT: Just don't do what I did, and overwrite the batch file with my wallet address with the default one and mine for over an hour for somebody else at 300mh.

Consider that a donation to miner developer Wink

Much appreciated!

By the way, I'd suggest using '-w 64' and Catalyst versions 13.11 to latest for all AMD cards.

oinquer

member

Activity: 94

Merit: 10

Quote from: jakiman on April 01, 2014, 03:31:44 AM

Quote from: vortal on April 01, 2014, 03:23:06 AM

Do I need change the cgminer setup or just use the default one? I have hd 7950.

Just replace the cgminer with the new one.
There is no need to change anything else.

Quote from: TheIcky on April 01, 2014, 02:53:21 AM

I have tried many setting variations and I just cant get my Sapphire Tri-X over 14Mh. Anyone else having this problem?

280x? Try what I wrote in my previous message:

https://bitcointalksearch.org/topic/m.5992343

I can now get over 21MH/s with my 280x with the new 1GH cgminer.

Do you have any preferred setup for hd7850, hd7950 or hd7970?

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

Quote from: vortal on April 01, 2014, 03:23:06 AM

Do I need change the cgminer setup or just use the default one? I have hd 7950.

Just replace the cgminer with the new one.
There is no need to change anything else.

Quote from: TheIcky on April 01, 2014, 02:53:21 AM

I have tried many setting variations and I just cant get my Sapphire Tri-X over 14Mh. Anyone else having this problem?

280x? Try what I wrote in my previous message:

https://bitcointalksearch.org/topic/m.5992343

I can now get over 21MH/s with my 280x with the new 1GH cgminer.

vortal

member

Activity: 64

Merit: 10

Quote from: Croak on April 01, 2014, 01:29:28 AM

On a happy note, new cgminer for HVC is a nice speed improvement, at the cost of extra power usage.

My rigs before

290x @1150Mhz -I8 25mh
290 @1150Mhz -I8 22mh
280x @1170Mhz -I8 16mh
270 @1150Mhz -I8 10mh
270 @ 1190Mhz -I8 11mh

My rigs now:

290x @1150Mhz -I8 31mh
290 @1150Mhz -I8 28mh
280x @1170Mhz -I8 22mh
270 @1150Mhz -I8 14mh
270 @ 1190Mhz -I8 15mh

EDIT: Just don't do what I did, and overwrite the batch file with my wallet address with the default one and mine for over an hour for somebody else at 300mh.

Can't believe in it!
The new version of cgminer by 1gh increases my rig's hash power greatly!
I can say 1gh is the best pool with the strongest tech support I've even met.

Do I need change the cgminer setup or just use the default one? I have hd 7950.

vortal

member

Activity: 64

Merit: 10

Quote from: Kreativekrypto on March 31, 2014, 05:56:12 PM

Quote from: STT on March 31, 2014, 05:32:58 PM

Quote

The mint rate and money supply are
continuously decided by cheat-proof decentralized voting.

Interesting take, is it true this coin uses very little power.
I would like to own some just to support innovation but Im just taking an interest, subbed

Correct almost 50% less power than traditional scrypt coins. Plus Heavycoin solves an issue that most fixed rate currencies have by having a built in system that determines future block size through voting. Also I'm just impressed at how strong per coin value is during this big dip with Bitcoin. Heavycoin is handling things quite well. Plus how many coins actually have devs that are capable of creating their own hashing algorithms?... Coming from other dev teams the answer is very few

I totally agreed with you.

From the point of view of a miner, low temperature and low energy cost mean great.

TheIcky

newbie

Activity: 39

Merit: 0

I have tried many setting variations and I just cant get my Sapphire Tri-X over 14Mh. Anyone else having this problem?

crovasco

newbie

Activity: 44

Merit: 0

Ok, but new miner is deprovement for me... Huh

Croak

member

Activity: 98

Merit: 10

On a happy note, new cgminer for HVC is a nice speed improvement, at the cost of extra power usage.

My rigs before

290x @1150Mhz -I8 25mh
290 @1150Mhz -I8 22mh
280x @1170Mhz -I8 16mh
270 @1150Mhz -I8 10mh
270 @ 1190Mhz -I8 11mh

My rigs now:

290x @1150Mhz -I8 31mh
290 @1150Mhz -I8 28mh
280x @1170Mhz -I8 22mh
270 @1150Mhz -I8 14mh
270 @ 1190Mhz -I8 15mh

EDIT: Just don't do what I did, and overwrite the batch file with my wallet address with the default one and mine for over an hour for somebody else at 300mh.

Stratobitz

legendary

Activity: 1022

Merit: 1010

Downtrend is only due to BTC being down. Most don't realize that. BTC is rated against the dollar or euro. But ALTs are rated against BTC. It's a compound effect. So when BTC falls 20%, ALTs should remain locked or fixed at the price they are at compared to BTC, but they fall too. So when btc is down is when you should buy the ALTs... Because your leverage is so much stronger when BTc rebounds which it will. I don't think most people get that.

If BTC falls from 500 to 400. That's a 20% drop. But then ALTs fall 10% also to BTC. So the value of an Alt is compounded. Buy when BTC is weak. Sell when bTC goes up. You have a lot more gain that way. Quite simple really.

Topic: [ANN] [HVC] Heavycoin - Ultra-secure, Decentralized Block Reward Voting, Fast - page 97. (Read 542277 times)