Pages:
Author

Topic: [ANN] [ICO] MIRQ 🔥 MASTERNODEs 85% ✅ PoS 15% 🔥 Bounties ✅ Airdrops - page 3. (Read 5842 times)

newbie
Activity: 11
Merit: 0
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Thanks for your reply. 
How do I see if my ports are open?
Is there somewhere I can get support from , their discord has gone ?
I’m a total noob here , this is my first masternode.
The debug console states that I have successfully created the masternode in the wallet , but checking the VPN through the terminal it states that it’s waiting for remote activation?
I’m not sure what to do ?



On your VPS provider side you should see security or firewall setting add the port there as inbound accept and outbound accept. Port 55611

hi, do you or anyone else know why my wallet has missing status AND when I try start the masternode it says invalid port?

Try the port 55611
newbie
Activity: 3
Merit: 0
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Thanks for your reply. 
How do I see if my ports are open?
Is there somewhere I can get support from , their discord has gone ?
I’m a total noob here , this is my first masternode.
The debug console states that I have successfully created the masternode in the wallet , but checking the VPN through the terminal it states that it’s waiting for remote activation?
I’m not sure what to do ?

On your VPS provider side you should see security or firewall setting add the port there as inbound accept and outbound accept. Port 55611

hi, do you or anyone else know why my wallet has missing status AND when I try start the masternode it says invalid port?
newbie
Activity: 11
Merit: 0
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Thanks for your reply. 
How do I see if my ports are open?
Is there somewhere I can get support from , their discord has gone ?
I’m a total noob here , this is my first masternode.
The debug console states that I have successfully created the masternode in the wallet , but checking the VPN through the terminal it states that it’s waiting for remote activation?
I’m not sure what to do ?

On your VPS provider side you should see security or firewall setting add the port there as inbound accept and outbound accept. Port 55611


I got it working , thankyou for your help.

Is it possible to run more than 1 mn on the same server?
I noticed that mrq is only using 10% of the server on vultr?
Can I run another mn ssh script on the same IP address ( same server)?
member
Activity: 247
Merit: 10
CPA Coin Developer
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Thanks for your reply. 
How do I see if my ports are open?
Is there somewhere I can get support from , their discord has gone ?
I’m a total noob here , this is my first masternode.
The debug console states that I have successfully created the masternode in the wallet , but checking the VPN through the terminal it states that it’s waiting for remote activation?
I’m not sure what to do ?

On your VPS provider side you should see security or firewall setting add the port there as inbound accept and outbound accept. Port 55611
newbie
Activity: 33
Merit: 0
Hi Dev, I'm trying to install the wallet and error message appears (Windows 64 wallet).
Any suggestion for correction?
newbie
Activity: 11
Merit: 0
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Thanks for your reply. 
How do I see if my ports are open?
Is there somewhere I can get support from , their discord has gone ?
I’m a total noob here , this is my first masternode.
The debug console states that I have successfully created the masternode in the wallet , but checking the VPN through the terminal it states that it’s waiting for remote activation?
I’m not sure what to do ?
newbie
Activity: 11
Merit: 0
Thankyou , your help is awesome.
I
Do have another problem , please see the attached photo , the masternode is successful inside my wallet as per the debug console states success. The terminal (Mac)VPN says waiting for remote activation?
Please help ,
member
Activity: 217
Merit: 10
Good to see the progress of this coin. In less than a month it has a very respetable volume and already on CMC. It would be great another exchange listing beside cryptobridge to get greater volume. Cheers!
newbie
Activity: 87
Merit: 0
Regular rewards by staking in the wallet, not configured a masternode, but over 5k coins

https://imgur.com/a/z2zn0DA
newbie
Activity: 1
Merit: 0
Rewards can take up to 60 Hours. Make sure your ports are open on your masternode if its a new node.
Also noticed that the rpc port in the mrq.conf is different to the one in the guide so i opened both anyways.
Some ISP firewalls block them both ways so enable out and inbound.

I see the buy order volume in MRQ is higher than the sell orders that is fantastic hodl the price is going to climb!!!!!


Hi,
what port did you open ? Port 55633 is not ok ?

Thanks
Steve
newbie
Activity: 87
Merit: 0
i am waiting for it to be listed on other exchanges and then you will get a price boom.
I hope for Cryptopia..

for $900 you can be in the top 30 !! coin holders, absolutely crazy low entry point
newbie
Activity: 78
Merit: 0
i am waiting for it to be listed on other exchanges and then you will get a price boom.
I hope for Cryptopia..
newbie
Activity: 78
Merit: 0
Yeap, this is a great coin, project. Now it's time to buy , while it's affordable. It will not be for long.
member
Activity: 247
Merit: 10
CPA Coin Developer
Wow! Going to hit *1000* masternodes this week, what an achievement, I've held shitcoins in my time but this ain't one of them for sure

I send a msg to DEV regarding the CMC error. Will let you know when I get feedback. 1000 Nodes will be great for the coin.
21 000 000 coins only price is low I can see the node value shooting up to 3K usd soon
newbie
Activity: 87
Merit: 0
Wow! Going to hit *1000* masternodes this week, what an achievement, I've held shitcoins in my time but this ain't one of them for sure
member
Activity: 247
Merit: 10
CPA Coin Developer
Hello , looking for help ,
I cannot get my masternode configurations file to open on my mac to finish the masternode install , I click on tools>open masternode configuration file ? And nothing happens .....

Please help urgently
Search your PC for the masternode.conf file open it with a text editor and edit it and save the file again as .conf file. Sorry MAc is not my strong point
newbie
Activity: 11
Merit: 0
Hello , looking for help ,
I cannot get my masternode configurations file to open on my mac to finish the masternode install , I click on tools>open masternode configuration file ? And nothing happens .....

Please help urgently
member
Activity: 247
Merit: 10
CPA Coin Developer
Hi , I’m a total noob here,
I want to run a mAsternode , I have downloaded the wallet for Mac,
The tutorial explains I need putty , and a vps (vulgr).
Can I use putty with my Mac ?
Sorry, I’m a novice   But see the potential here and want in.

https://www.ssh.com/ssh/putty/mac/
newbie
Activity: 11
Merit: 0
Hi , I’m a total noob here,
I want to run a mAsternode , I have downloaded the wallet for Mac,
The tutorial explains I need putty , and a vps (vulgr).
Can I use putty with my Mac ?
Sorry, I’m a novice   But see the potential here and want in.
legendary
Activity: 1176
Merit: 1000
I never stop investing coins with masternode, I loved coins with masternode concept, low price and cheap price, and will become profitable.


Best regards

Okane Satoshi


P# 1128
C# 6
Pages:
Jump to: