Sell them 1:1 in BTC.
Hurry up. Ebayprice is 1k atm.
http://www.ebay.de/itm/330923394589
Topic: [ANN] Introducing Firecoin², an honest scrypt based coin. - page 29. (Read 34925 times)
Wohoo got a block!
Sell them 1:1 in BTC.
Hurry up. Ebayprice is 1k atm.
http://www.ebay.de/itm/330923394589
Sell them 1:1 in BTC.
Hurry up. Ebayprice is 1k atm.
http://www.ebay.de/itm/330923394589
Quote
You got a pool up?
loading blockchain and pool saying connection refused... need wait untill its ready.. address will be http://pool.titanix.net:9999 when i get it
My Batchfile is ready to go
You use your wallet address as the username and nothing for password, correct? Haven't done P2P before 63 connections, and still nothing but orphans.Sigh
Same thing is happening to me.
Quote
You got a pool up?
loading blockchain and pool saying connection refused... need wait untill its ready.. address will be http://pool.titanix.net:9999 when i get it
63 connections, and still nothing but orphans.Sigh
Yes, brilliant release solid concept, plenty of innovation, need to get this to an exchange, quick!
Sure get it on an exchange and watch the value of it and every other coin fall off the face of the earth. The confidence in crypto currencies will drop if investors ever see this.
Go mine some YAC
Code:
g++ -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DUSE_IPV6 -DBOOST_SPIRIT_THREADSAFE -I/home/fc2/FeatherCoin-master/src -I/home/fc2/FeatherCoin-master/src/obj -DUSE_UPNP=0 -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -o feathercoin2d obj/version.o obj/checkpoints.o obj/netbase.o obj/addrman.o obj/crypter.o obj/key.o obj/db.o obj/init.o obj/irc.o obj/keystore.o obj/main.o obj/net.o obj/protocol.o obj/bitcoinrpc.o obj/rpcdump.o obj/rpcnet.o obj/rpcrawtransaction.o obj/script.o obj/scrypt.o obj/sync.o obj/util.o obj/wallet.o obj/walletdb.o obj/noui.o -Wl,-z,relro -Wl,-z,now -Wl,-Bdynamic -l boost_system -l boost_filesystem -l boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread
obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [feathercoin2d] Error 1
i was trying compile to get p2pool setup, but well... i have no idea what i should change to get this working..
on linux...
thanks
im waiting, i setup p2pool there already so need daemon and blockchain load then we can start test itYou set up all the correct dependencies? Try rebuilding the makefile, if nothing else.
this is the only coin what not compile there, even feathercoin1 compile ok.
maybe u forgot change some files? about addr ?
Remake the makefile and you should get a clean compile.
im not good doing this, not a coder, but i try something. i use abit google if i came up something howto do it
i MADE IT! look this:
[fc2@boing src]$ ./feathercoin2d
Feathercoin2 server starting
Buhahahh
Yes, brilliant release solid concept, plenty of innovation, need to get this to an exchange, quick!
Sure get it on an exchange and watch the value of it and every other coin fall off the face of the earth. The confidence in crypto currencies will drop if investors ever see this.
Code:
g++ -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DUSE_IPV6 -DBOOST_SPIRIT_THREADSAFE -I/home/fc2/FeatherCoin-master/src -I/home/fc2/FeatherCoin-master/src/obj -DUSE_UPNP=0 -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -o feathercoin2d obj/version.o obj/checkpoints.o obj/netbase.o obj/addrman.o obj/crypter.o obj/key.o obj/db.o obj/init.o obj/irc.o obj/keystore.o obj/main.o obj/net.o obj/protocol.o obj/bitcoinrpc.o obj/rpcdump.o obj/rpcnet.o obj/rpcrawtransaction.o obj/script.o obj/scrypt.o obj/sync.o obj/util.o obj/wallet.o obj/walletdb.o obj/noui.o -Wl,-z,relro -Wl,-z,now -Wl,-Bdynamic -l boost_system -l boost_filesystem -l boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread
obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [feathercoin2d] Error 1
i was trying compile to get p2pool setup, but well... i have no idea what i should change to get this working..
on linux...
thanks
im waiting, i setup p2pool there already so need daemon and blockchain load then we can start test itYou set up all the correct dependencies? Try rebuilding the makefile, if nothing else.
this is the only coin what not compile there, even feathercoin1 compile ok.
maybe u forgot change some files? about addr ?
Remake the makefile and you should get a clean compile.
im not good doing this, not a coder, but i try something. i use abit google if i came up something howto do it
i MADE IT! look this:
[fc2@boing src]$ ./feathercoin2d
Feathercoin2 server starting
Buhahahh
Reminder to anyone getting high orphan/reject rates to open up port 9131 on your router. This should let you get 50+ incoming connections instead of 8.
Greatly improves your ability to transmit solutions before your peers. I'm minting new FC2's at a very steady rate now
Greatly improves your ability to transmit solutions before your peers. I'm minting new FC2's at a very steady rate now
What would be the best settings for Expiry and Scan-time for this/new coin?
bah. So many rejects... even with 60 connections.
Yes, brilliant release solid concept, plenty of innovation, need to get this to an exchange, quick!
You know, the funny thing is, this might be the fairest release of a coin yet lol.
That speaks pretty poorly of the recently released coins. Nothing but good things to say about Hazard's release so far. I can't believe I'm saying that lol.
That speaks pretty poorly of the recently released coins. Nothing but good things to say about Hazard's release so far. I can't believe I'm saying that lol.
Code:
g++ -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DUSE_IPV6 -DBOOST_SPIRIT_THREADSAFE -I/home/fc2/FeatherCoin-master/src -I/home/fc2/FeatherCoin-master/src/obj -DUSE_UPNP=0 -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -o feathercoin2d obj/version.o obj/checkpoints.o obj/netbase.o obj/addrman.o obj/crypter.o obj/key.o obj/db.o obj/init.o obj/irc.o obj/keystore.o obj/main.o obj/net.o obj/protocol.o obj/bitcoinrpc.o obj/rpcdump.o obj/rpcnet.o obj/rpcrawtransaction.o obj/script.o obj/scrypt.o obj/sync.o obj/util.o obj/wallet.o obj/walletdb.o obj/noui.o -Wl,-z,relro -Wl,-z,now -Wl,-Bdynamic -l boost_system -l boost_filesystem -l boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread
obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [feathercoin2d] Error 1
i was trying compile to get p2pool setup, but well... i have no idea what i should change to get this working..
on linux...
thanks
im waiting, i setup p2pool there already so need daemon and blockchain load then we can start test itYou set up all the correct dependencies? Try rebuilding the makefile, if nothing else.
this is the only coin what not compile there, even feathercoin1 compile ok.
maybe u forgot change some files? about addr ?
Remake the makefile and you should get a clean compile.
im not good doing this, not a coder, but i try something. i use abit google if i came up something howto do it
why on earth would anyone buy this shit?
i dont care just wanna make some money
Feathercoin2 is to feathercoin, like broadband is to dialup.i dont care
just wanna make some moneyThe evolution.
my first computer with the wallet address is 192.168.1.98 and i have that in the conf file and it is minig
my second rig address 192.168.1.102 it is not mining saying wrong url
i have the host address as 192.168.1.98
Is it correct or am i doing something wrong?
my second rig address 192.168.1.102 it is not mining saying wrong url
i have the host address as 192.168.1.98
Is it correct or am i doing something wrong?
Post your config file...
here is my conf file
rpcuser=user
rpcpassword=password
testnet=0
listen=1
maxconnections=100
server=1
rpcport=9132
rpcconnect=127.0.0.1
rpcallowip=127.0.0.1
rpcallowip=192.168.1.*
port=9131
remove "rpcconnect=127.0.0.1" and restart your wallet with the "-server" tag. If you still can't connect, try disabling windows firewall. Make sure you have the port number 9132 in your URL: http://192.168.1.98:9132
poochie, not sure but keep in mind that each FTC is worth .001 BTC. I would expect FTC2 to be worth more since it is the next generation and had a much smaller premine.
Hats off to Hazard - this is one of the few coins I have actually been able to solo mine without getting 100% orphans. Suggests an honest coin
Hats off to Hazard - this is one of the few coins I have actually been able to solo mine without getting 100% orphans. Suggests an honest coin
why on earth would anyone buy this shit?
i dont care just wanna make some money
i dont care
just wanna make some money i can`t connect with cgminer, .conf file should be named feathercoin2.conf? in app data folder?
yes feathercoin2.conf. Make sure that you also run the executable with the -server option
Jump to: