Topic: [ANN] MEGASTAKE! X11! ROADMAP!! MANDATORY UPDATE!!! - page 17. (Read 27185 times)
Got my first POS block. Everything is OK.
Just to be sure, POW runs till block 4000??
Correct.
thanks
Hello Dev- Launch was great congratulations!
I sent my coins to my wallet around 4 hours ago and I know min stake hour is 8.
What I want to ask is that, will POS kick in before end of Pow (during pow) or after Pow finishes?
THanks and looking for Pistaker
I sent my coins to my wallet around 4 hours ago and I know min stake hour is 8.
What I want to ask is that, will POS kick in before end of Pow (during pow) or after Pow finishes?
THanks and looking for Pistaker
POS is active. This coin is a hybrid chain coin. POW and POS add blocks to the same chain.
Thank you for the support! It doesn't go unnoticed. We look forward to building our community through ground floor marketing and interactions.
Also i would like to give a big thanks to AltsAreBack. We really appreciate you taking the time to put together the launch article for us.
I am going to be posting a donation address to help fund some bounties. I wont forget about our first contributor!
Hello Dev- Launch was great congratulations!
I sent my coins to my wallet around 4 hours ago and I know min stake hour is 8.
What I want to ask is that, will POS kick in before end of Pow (during pow) or after Pow finishes?
THanks and looking for Pistaker
I sent my coins to my wallet around 4 hours ago and I know min stake hour is 8.
What I want to ask is that, will POS kick in before end of Pow (during pow) or after Pow finishes?
THanks and looking for Pistaker
I think the article could use some revising. Too many typos which e.g. suggest a weird coin supply.
Just my two cents.
Just my two cents.
There was one typo (900,00 instead of 900,000), which has been fixed.
Nothing weird regarding the coin supply in the article if people bother to read it
Just posted our first article on XMS, can be found here.
Looking forward to more information about the PiStaker!
I think the article could use some revising. Too many typos which e.g. suggest a weird coin supply. Looking forward to more information about the PiStaker!
Just my two cents.
Just posted our first article on XMS, can be found here.
Looking forward to more information about the PiStaker!
Looking forward to more information about the PiStaker!
Just to be sure, POW runs till block 4000??
Correct.
Just to be sure, POW runs till block 4000??
Looks not bad.
Dev, do u have any future plans for this coin? roadmap would be nice I think
Dev, do u have any future plans for this coin? roadmap would be nice I think
Yes we plan to do a graphic overhaul before the end of POW.
This will include a roadmap as well as a more in depth view of what we plan to accomplish.
We really appreciate the enthusiasm so far. One of our main goals during POW is to make sure there are enough coins being staked.
This will guarantee a smooth transition to POS.
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
Save this nodes in the "megastake.conf" and put this file at your wallet data directory.
Thanks for the help its work
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
Save this nodes in the "megastake.conf" and put this file at your wallet data directory.
Thanks for the help its work
DONT POST LINKS TO A WALLET
APOLOGIES IF LEGIT
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
Save this nodes in the "megastake.conf" and put this file at your wallet data directory.
Thanks for the help its work
Can someone (maybe ocminer?) try to explain one strange fact:
on Suprnova block 1001 was found and the coins amount is reported to be 350.
See this:
Quote
Block Validity Finder Time Difficulty Amount Expected Shares Actual Shares Percentage
1025 115 left kojifeng 04/28/2015 15:00:21 1,015.1565 300.00 259,880 31,330 12.06
1024 114 left anonymous 04/28/2015 14:59:45 999.2324 300.00 255,803 601,236 235.04
1001 91 left fenomenhaa 04/28/2015 14:41:01 709.3605 350.00 181,596 223,568 123.11
993 83 left anonymous 04/28/2015 14:28:20 944.5766 350.00 241,812 259,453 107.30
971 61 left anonymous 04/28/2015 14:05:39 1,033.1754 350.00 264,493 134,989 51.04
1025 115 left kojifeng 04/28/2015 15:00:21 1,015.1565 300.00 259,880 31,330 12.06
1024 114 left anonymous 04/28/2015 14:59:45 999.2324 300.00 255,803 601,236 235.04
1001 91 left fenomenhaa 04/28/2015 14:41:01 709.3605 350.00 181,596 223,568 123.11
993 83 left anonymous 04/28/2015 14:28:20 944.5766 350.00 241,812 259,453 107.30
971 61 left anonymous 04/28/2015 14:05:39 1,033.1754 350.00 264,493 134,989 51.04
But according to the source code that is impossible:
Quote
else if (pindexBest->nHeight > 500 && pindexBest->nHeight <= 1000)
{
int64_t nSubsidy = 350 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
else if (pindexBest->nHeight > 1000 && pindexBest->nHeight <= 1500)
{
int64_t nSubsidy = 300 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
{
int64_t nSubsidy = 350 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
else if (pindexBest->nHeight > 1000 && pindexBest->nHeight <= 1500)
{
int64_t nSubsidy = 300 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
Is it a bug on Suprnova display, or wrong wallet used?
The reward change seems to be offset by 1 block
Yep, code is off by one block.. They should have written 999 there.
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
Save this nodes in the "megastake.conf" and put this file at your wallet data directory.
Thanks for the help its work
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
Save this nodes in the "megastake.conf" and put this file at your wallet data directory.
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
I see it but How??
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
it's on the first page
addnode=178.62.40.227
addnode=76.26.82.101
addnode=184.75.211.142
addnode=120.146.238.104
addnode=2.61.166.239
my windows wallet is not syncing
How can I add node?
How can I add node?
same here, out of sync
Jump to: