Author

Topic: [ANN] MemoryCoin | CPU Coin | Paid Dev Team | Limited Supply [MMC] - page 118. (Read 281389 times)

hero member
Activity: 724
Merit: 500
With 8 threads on my Core i7 Notebook I get about 1.5 Hashes/min, and the client is using 1.1 GB of RAM. I thought 1 GB / thread were needed, not 1 GB total.

Block time appears to be higher than 6 minutes.
legendary
Activity: 1120
Merit: 1000
Looks like there is a ton of people with wallets not getting synced.

What's the solution here? And yes we added all the nodes you posted so far.
newbie
Activity: 21
Merit: 0
I can't imagine it just "takes time" to connect to these nodes.
I've added .conf to roaming folder. Added all nodes from this thread and over 30 mins later still not syncing.

I did all of that too & mine took about 20 minutes - most of that time it was flipping between no connections and 1 connection to network, and then it worked and downloaded. Not sure if there's anything else you can do but wait.

full member
Activity: 178
Merit: 100
{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespermin" : 2.79481407,
"pooledtx" : 0,
"testnet" : false
}
full member
Activity: 182
Merit: 100
Is there any possibility to utilize more than 8 threads on the processor??
Please help Smiley

yes, but you just will be using your hardware theads ...
newbie
Activity: 56
Merit: 0
I can't imagine it just "takes time" to connect to these nodes.
I've added .conf to roaming folder. Added all nodes from this thread and over 30 mins later still not syncing.

I managed to sync everything, then it crashed and now I've got the same problem..
sr. member
Activity: 350
Merit: 250
Vires in Numeris
It worked, it's downloading the block.
What about the .conf file? Why it isn't included by default? What should I put inside the memorycoin.conf file that I have to create anyway?

Also, how do I set that the mined coins go to a certain address? I dont want to be mining and find out they aren't getting into my address

I have the exact same question please !

Actually I've never used a .conf file

Mined rewards will go to your main wallet address.


Then why im not having seeing any coins?


{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44342621,
"pooledtx" : 0,
"testnet" : false
}

How do I see if im mined something or not? Is that allright or something is wrong? why is generate set to false? please help

ugh... When you mine a coin, on the home page "overview" it will show your balance at the top left. Coins must be confirmed before they enter your Balance.
When you mine a block it will appear under the "recent transactions" on the right with the time amount and address.
member
Activity: 120
Merit: 10
Double Opteron 4356

{
"blocks" : 43,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000079,
"errors" : "",
"generate" : true,
"genproclimit" : 16,
"hashespermin" : 4.56202554,
"pooledtx" : 0,
"testnet" : false
}


0 blocks in 1h   Undecided
sr. member
Activity: 350
Merit: 250
As of right now I am still not getting any signal , I am still not connected to any blocks so far . I downloaded the wallet and waited to be connected to blockchain , is there something wrong? Should I do something other than this or should I just wait more? On the bottom right of the wallet its still blinking away 2 computer screens with one X sign and than it goes to 1 signal and come back to computer screens again. Is this a common thing? Waited for more than an hour and its still out of sync.

go to Help -> Debug Window. Then type in the box line by line

addnode 180.183.156.250:1968 add
addnode 90.231.187.171:50251 add
addnode 76.24.94.154:1968 add
addnode 70.112.30.253:26959 add
addnode 62.43.2.239:1968 add
addnode 82.52.177.81:1968 add
addnode 193.92.140.209:51570 add

Then just wait a couple minutes.

 Nope still nothing
sr. member
Activity: 350
Merit: 250
Vires in Numeris
I can't imagine it just "takes time" to connect to these nodes.
I've added .conf to roaming folder. Added all nodes from this thread and over 30 mins later still not syncing.
sr. member
Activity: 322
Merit: 250
It worked, it's downloading the block.
What about the .conf file? Why it isn't included by default? What should I put inside the memorycoin.conf file that I have to create anyway?

Also, how do I set that the mined coins go to a certain address? I dont want to be mining and find out they aren't getting into my address

I have the exact same question please !

Actually I've never used a .conf file

Mined rewards will go to your main wallet address.


Then why im not having seeing any coins?


{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44342621,
"pooledtx" : 0,
"testnet" : false
}

How do I see if im mined something or not? Is that allright or something is wrong? why is generate set to false? please help
newbie
Activity: 37
Merit: 0
Is there any possibility to utilize more than 8 threads on the processor??
Please help Smiley
sr. member
Activity: 350
Merit: 250
DTC unofficial team
Getting the error: "comparison between signed and unsigned integer expressions -wsign-comparebitcoin comparison between signed and unsigned integer expressions -wsign-compare" when trying to compile.

I have the same issues.  A lot of warnings (type conversion via int64 etc), this error, printf error (also corrected it), but WTFs in this code make me scared Sad
full member
Activity: 182
Merit: 100
No blocks mined yet ... Huh Someone has mined any block?

i7-2600k

{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespermin" : 3.18347856,
"pooledtx" : 0,
"testnet" : false
}
legendary
Activity: 882
Merit: 1000
Mine has been 1 hour behind, no block source available for a while now. No matter how many nodes i've added it's stuck to one connection


Code:
trying connection 180.183.156.250:1968 lastseen=160.2hrs
connected 180.183.156.250:1968
send version message: version 70001, blocks=0, us=41.78.77.178:1968, them=180.183.156.250:1968, peer=180.183.156.250:1968
MemoryCoinMiner started
Create Block, 1
Total ...0
After grant ...
keypool added key 102, size=101
keypool reserve 2
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 5694 / 1230519720
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 2534 / 3786981494
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Flushing wallet.dat
Flushed wallet.dat 3ms
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 662 / 571676942
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 13288 / 1082448174
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 2745 / 3596934753
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 7563 / 736044671
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 65 / 870520545
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 327 / 360053119
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 12806 / 4278580729
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
Test Connect Block
verify solution - 0 / 15557 / 663470383
ERROR: ConnectBlock() : Block 1 coinbase pays too much (actual=117154811 vs limit=117154811)
Create Block, 1
Total ...0
After grant ...
CreateNewBlock(): total size 1000
newbie
Activity: 37
Merit: 0
what should be the RPC port: 1925 or 1968?
sr. member
Activity: 337
Merit: 250
https://streamies.io/
Link to download doesnt work??
full member
Activity: 140
Merit: 100
For those with the mkdir error, add the following header to main.cpp:

#include
sr. member
Activity: 448
Merit: 280
Someone won X memoricoin ?

If yes, how much is your hash/m and how many time to wait ?
legendary
Activity: 1120
Merit: 1000
As of right now I am still not getting any signal , I am still not connected to any blocks so far . I downloaded the wallet and waited to be connected to blockchain , is there something wrong? Should I do something other than this or should I just wait more? On the bottom right of the wallet its still blinking away 2 computer screens with one X sign and than it goes to 1 signal and come back to computer screens again. Is this a common thing? Waited for more than an hour and its still out of sync.

go to Help -> Debug Window. Then type in the box line by line

addnode 180.183.156.250:1968 add
addnode 90.231.187.171:50251 add
addnode 76.24.94.154:1968 add
addnode 70.112.30.253:26959 add
addnode 62.43.2.239:1968 add
addnode 82.52.177.81:1968 add
addnode 193.92.140.209:51570 add

Then just wait a couple minutes.

Nodes already added. Still no connections in the lower right corner.
Jump to: