Topic: [ANN] Minereum - First Self Mining Smart Contract - page 279. (Read 438122 times)
Token Creation Service is released as planned, good work dev, now is easy for everyone to make their own tokens under ethereum network.
to Dev.
1- the service you just release wont create the demand.
2- you need to announce the next service which is for the main public and not only to the crypto community.
if this service would create the demand for MNE ?
3- you know how important it is to have the Bittrex right ?
there is not much volume for livecoin all it take only a few then it could knock the price down to the bottom.
1- the service you just release wont create the demand.
2- you need to announce the next service which is for the main public and not only to the crypto community.
if this service would create the demand for MNE ?
3- you know how important it is to have the Bittrex right ?
there is not much volume for livecoin all it take only a few then it could knock the price down to the bottom.
1- the service that just went live, and works, is proof of the teams dedication and shows their not full of shit but actually develop stuff. IMO that is far more important than any actual use for the product right away.
2- Again, a solid distribution and a solid dev team with a unique concept will create demand.
3- There is a MNE rich list posted a couple of pages back. It was very very unimpressive. Initial distribution was fair and the release of tokens is controlled. We've had millions of volume over the last week so distribution got even better than it was already. This token, AFAIK, has no whales who could crash the market and the genesis holders can't dump because their tokens are locked.
I'm just answering this because I assume dev has better things to do.
Recent update from Blockfolio on Minereum support. They'll be adding Livecoin.net
i send a message them like a week ago. they have gave me the same answer.
i think minereum will be on different exchange before blockfolio add livecoin.net
How would Blockfolio work with Genesis holders? If not you'll have to keep updating it everyday with 1.8 tokens.
stop whining
Recent update from Blockfolio on Minereum support. They'll be adding Livecoin.net
i send a message them like a week ago. they have gave me the same answer.
i think minereum will be on different exchange before blockfolio add livecoin.net
How would Blockfolio work with Genesis holders? If not you'll have to keep updating it everyday with 1.8 tokens.
WOW!! Just transferred some btc to livecoin.. now i go to try it out, if all is working fine, i will buy a nice share!
I let you know later
I let you know later
This would be your best investment into this promising project I really appreciate the hard job of this team so I can this without any doubt this will be coin of the future.
Introducing...
MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
What use does it have? MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
someone could tell me?
thx..
to Dev.
1- the service you just release wont create the demand.
2- you need to announce the next service which is for the main public and not only to the crypto community.
will this service would create the demand for MNE ?
3- you know how important it is to have the Bittrex right ?
there is not much volume for livecoin, all it take only a few then it could knock the price down to the bottom.
1- the service you just release wont create the demand.
2- you need to announce the next service which is for the main public and not only to the crypto community.
will this service would create the demand for MNE ?
3- you know how important it is to have the Bittrex right ?
there is not much volume for livecoin, all it take only a few then it could knock the price down to the bottom.
WOW!! Just transferred some btc to livecoin.. now i go to try it out, if all is working fine, i will buy a nice share!
I let you know later
I let you know later
It works. I've created a token and now shall the Ethereum Blockchain forever bear witness.
https://etherscan.io/token/0x4efe7bb927e2e16d54955bbceb98cf955ffcbecd
https://etherscan.io/token/0x4efe7bb927e2e16d54955bbceb98cf955ffcbecd
Now all we need is a new exchange and the next project reveal.
Good job Minereum team!
Good job Minereum team!
This is wonderful job done by dev teams so now this token will go the moon after this kind of amazing service.
New Article:
Minereum’s Self Mining Token Can Generate ERC20 Tokens And More
https://www.ethnews.com/minereums-self-mining-token-can-generate-erc20-tokens-and-more
Minereum’s Self Mining Token Can Generate ERC20 Tokens And More
https://www.ethnews.com/minereums-self-mining-token-can-generate-erc20-tokens-and-more
More articles - more people know about Mne . but noone can mine MNE coins if he have rigs or asics, if someone wanna hold some MNE - he must buy it on exchange, but this is also not easy
. I think in 2017 we will see more coins like Mne and i say not about coins which will be built with Mne, i mean new and uniq coins with a similar coin distribution strategy. 
Introducing...
MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
Awesome work!
Introducing...
MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
MINEREUM TOKEN CREATION SERVICE
The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.
Before using the service please take note of the following:
1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals
Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205
To Generate your Token, follow these steps:
1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
After this, you are in full control of your Token.
Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t
Next steps are:
1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it
2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
2.2 This function can only be used once, so make sure the parameters you enter are correct
2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
3. Refresh your wallet and you will see your address with your Token balance
4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18
5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]
We will update this post along the way with more useful info, including screenshots for all steps to be more clear.
And dev delivers once more. GJ!
MINEREUM TOKEN CREATION SERVICE 1.0
This post was moved to another thread: https://bitcointalksearch.org/topic/ann-minereum-token-creation-service-create-your-own-erc20-ethereum-token-1975550
This post was moved to another thread: https://bitcointalksearch.org/topic/ann-minereum-token-creation-service-create-your-own-erc20-ethereum-token-1975550
There's a bit more to it than that. At the moment doing anything with Ethereum requires a degree in Applied Chaos Theory or Quantum Physics. Token creation on the Ethereum network is an even less user friendly experience. For anyone to want to launch a product on Ethereum they'd probably need to hire a developer with direct applied knowledge of the platform. Minereum is going to bridge the gap between technology and end user by automating token creation. So instead of having to find and hire people who can code your token and allow you to release it you'll just 'pay' Minereum to do it for you. You'll pay for the service in Minereum tokens, which will be burned as a result. The way I understand it the token creation service will allow you to swap Minereum tokens for tokens that will be created according to your own specifications.
This is of course what I think it will look like
Only dev knows but they'll reveal it all in due time Spot on! I get the idea now. Thank you very much for your explanation!
Is a service wich will allow common people to create their own ethereum token with just a simple transaction, the cost will be in Mineruem and said tokens will be destroyed inmediately.
So the whole idea is to spend MNE to create your own ethereum token similar to MNE and the MNE you spent goes out of circulation. Then what? I don't understand what the benefits are. What am i missing?
There's a bit more to it than that. At the moment doing anything with Ethereum requires a degree in Applied Chaos Theory or Quantum Physics. Token creation on the Ethereum network is an even less user friendly experience. For anyone to want to launch a product on Ethereum they'd probably need to hire a developer with direct applied knowledge of the platform. Minereum is going to bridge the gap between technology and end user by automating token creation. So instead of having to find and hire people who can code your token and allow you to release it you'll just 'pay' Minereum to do it for you. You'll pay for the service in Minereum tokens, which will be burned as a result. The way I understand it the token creation service will allow you to swap Minereum tokens for tokens that will be created according to your own specifications.
This is of course what I think it will look like
Only dev knows but they'll reveal it all in due time
https://www.ethnews.com/minereums-self-mining-token-can-generate-erc20-tokens-and-more
Minereum's representative divulged to ETHNews that a bigger project will soon be announced after the Token Creation Service goes live. " This new service... will be essential to deliver Minereum (and cryptocurrencies in general) to the main public and not only to the crypto community."
you guys seeing this. bigger - better will be announce.
wonder what it would be. top secret.
Minereum's representative divulged to ETHNews that a bigger project will soon be announced after the Token Creation Service goes live. " This new service... will be essential to deliver Minereum (and cryptocurrencies in general) to the main public and not only to the crypto community."
you guys seeing this. bigger - better will be announce.
wonder what it would be. top secret.
stay tuned, Token Creation Service update will be delivered soon today
This is great timing for new investors who are just buying into BTC or want a steady alt during these times of hodl.
Personally, I'm more excited to hear about the next big feature after this one's release.
New Article:
Minereum’s Self Mining Token Can Generate ERC20 Tokens And More
https://www.ethnews.com/minereums-self-mining-token-can-generate-erc20-tokens-and-more
Minereum’s Self Mining Token Can Generate ERC20 Tokens And More
https://www.ethnews.com/minereums-self-mining-token-can-generate-erc20-tokens-and-more
Thanks for sharing. Showing up on ETHNews is pretty strong.
Jump to: