HashHarder's Issues Have Now Been Resolved
The pool appears to be working properly now.
Of course we won't know for sure until we get our first blocks.
Topic: [ANN] MON | Monocle | Merge Mined on VTC Vertcoin - No Premine - Scrypt-N - page 64. (Read 145946 times)
May 02, 2014, 02:22:17 PM
May 02, 2014, 02:22:01 PM
I looks like every thing works now on http://192.168.2.70:9174/static/ For merged mining connect to http://192.168.2.70:9555
This is VERTCOIN NET 3.
I will have to check that payouts work like they should. Will monitor as much as I can.
Right now 1 MON is immature. And I guess we need to find a block in net 3 to see if VTC works right.
This is VERTCOIN NET 3.
I will have to check that payouts work like they should. Will monitor as much as I can.
Right now 1 MON is immature. And I guess we need to find a block in net 3 to see if VTC works right.
where are you located ?
Sweden (Northen EU)
http://coin.cubeconnex.com/poollist/ check ping and use the pool closest to you.
And MON is only active if you can connect to 9555, or other port if pool operator say so.
May 02, 2014, 02:21:46 PM
monocle wallet is not updating
no block source available..
any ideas
no block source available..
any ideas
I put some addnode= entries in the OP - add those to monocle.conf and restart the daemon/wallet
May 02, 2014, 02:20:06 PM
By the way what is BRNDF ?
"Retarget: Every 12 blocks using BRNDF. Starting difficulty 2.0"
"Retarget: Every 12 blocks using BRNDF. Starting difficulty 2.0"
May 02, 2014, 02:18:30 PM
WTS Epic #3 block for 0.5 BTC - TxID: 9c2bc59d2ece4e16440f376e19f4430643e3d53a8a3ddf1194dcf2007f136ba7
May 02, 2014, 02:17:58 PM
okay i know that the MONs will be sent out until they get confirmed in the server. however, the payout system itself doenst seem to be working...or is that just me..
Quote
raise URLError(err)
URLError:
URLError:
May 02, 2014, 02:17:46 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
monocle.conf
server=1
gen=0
rpcport=6888
rpcallowip=127.0.0.1
rpcuser=yourusername
rpcpassword=areallystrongpassword
server=1
gen=0
rpcport=6888
rpcallowip=127.0.0.1
rpcuser=your-username
rpcpassword=your-password
addnode=146.185.131.175
addnode=188.226.239.48
addnode=188.226.233.63
+1
Thanks man, let God be with you
and for everyone else .... the forum is designed to help, not to offend
Good luck to all
May 02, 2014, 02:17:26 PM
i love how you can't even download the vertcoin miner off of the vtc thread. LOL all the vtc miner links atm are broken. =/
May 02, 2014, 02:16:01 PM
Code:
[
{
"account" : "",
"address" : "MDC3tSz2gUruhb1efjcYcV8YDnLRE4Cj5P",
"category" : "immature",
"amount" : 1.00000000,
"confirmations" : 92,
"generated" : true,
"blockhash" : "be55cf8a22f6ebe904eeaa41f22c326faf25156a03f89d824b74c06523bc3fe9",
"blockindex" : 0,
"blocktime" : 1399055871,
"txid" : "6872ffe0e92c044ccb36194ed3a22e075ddd6975fb2477221869bde6df3c5653",
"normtxid" : "dd02fdeb63a32c93b5a7f44693e40ce08271bd6ec9e329a5c576a2d1eb4443dd",
"time" : 1399055871,
"timereceived" : 1399055879
},
{
"account" : "",
"address" : "M8kpWqvmzPSiV2s1hryoy2A8ambXv5Gwju",
"category" : "immature",
"amount" : 1.00000000,
"confirmations" : 16,
"generated" : true,
"blockhash" : "5d2a9ee720f67f9872ed013f5e940f044b53c676221348ca9ee15faeeb9435ee",
"blockindex" : 0,
"blocktime" : 1399057585,
"txid" : "2e165153d08db607c7fe0c40fcc3846ba42a791924c3966896ff67d310427701",
"normtxid" : "f0ada240b1c3e970a98f87554a5759293fb4ef5475fd1ee9fe00ccdb33079b75",
"time" : 1399057585,
"timereceived" : 1399057628
}
]
I think it's 120 confirmations on MON, correct me if I'm wrong. But as soon as both coins is confirmed 1 MON will be paid from http://192.168.2.70:9174/static/
Need 1 coin in wallet for transactions fees.
No one will get any coins in there wallets until the first coins is confirmed. This is not normal p2pool mining it's proxy to server wallet and server does payouts from wallet ever 5 min if there are coins to pay.
May 02, 2014, 02:14:55 PM
I looks like every thing works now on http://192.168.2.70:9174/static/ For merged mining connect to http://192.168.2.70:9555
This is VERTCOIN NET 3.
I will have to check that payouts work like they should. Will monitor as much as I can.
Right now 1 MON is immature. And I guess we need to find a block in net 3 to see if VTC works right.
This is VERTCOIN NET 3.
I will have to check that payouts work like they should. Will monitor as much as I can.
Right now 1 MON is immature. And I guess we need to find a block in net 3 to see if VTC works right.
where are you located ?
May 02, 2014, 02:13:37 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
man is right, as always, do put a sample monocle.conf file in the first post
so do all new coins
my dick :* for you
May 02, 2014, 02:13:19 PM
from the pool website where i'am mining:
"When you mine both VTC and MON you will not show up as a normal miner you will be proxymining with every one else on this node.
Payouts when mining both VTC and MON will be from a wallet address not Mining. Payouts need 120 confirms on the server and then they will be paid. So it will take longer. Devs say this is a temporary way to do it."
http://176.10.212.237:9174/static/
"When you mine both VTC and MON you will not show up as a normal miner you will be proxymining with every one else on this node.
Payouts when mining both VTC and MON will be from a wallet address not Mining. Payouts need 120 confirms on the server and then they will be paid. So it will take longer. Devs say this is a temporary way to do it."
http://176.10.212.237:9174/static/
May 02, 2014, 02:13:15 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
May 02, 2014, 02:13:11 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
monocle.conf
server=1
gen=0
rpcport=6888
rpcallowip=127.0.0.1
rpcuser=yourusername
rpcpassword=areallystrongpassword
server=1
gen=0
rpcport=6888
rpcallowip=127.0.0.1
rpcuser=your-username
rpcpassword=your-password
addnode=146.185.131.175
addnode=188.226.239.48
addnode=188.226.233.63
May 02, 2014, 02:11:58 PM
The Blocks have to mature before the pool can pay the out to your wallet.
You have to remember your mining to a proxy pool and not directly on an p2pool
You have to remember your mining to a proxy pool and not directly on an p2pool
Please elaborate
May 02, 2014, 02:11:34 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
monocle.conf
server=1
gen=0
rpcport=6888
rpcallowip=127.0.0.1
rpcuser=yourusername
rpcpassword=areallystrongpassword
May 02, 2014, 02:11:02 PM
Looking fro configuration file
monocle.conf
and
.bat file settings
monocle.conf
and
.bat file settings
?What a stupid start, without explanation
you did it on purpose
to confuse people
Where'd you go
lol id like to help but your being a dick :*
May 02, 2014, 02:10:43 PM
The Blocks have to mature before the pool can pay the out to your wallet.
You have to remember your mining to a proxy pool and not directly on an p2pool
You have to remember your mining to a proxy pool and not directly on an p2pool
ok
May 02, 2014, 02:09:54 PM
Boris,
Something wrong with your pool?
Because i'm mining from the start and nothing comes in my wallet or can see any transactions at all...
same Something wrong with your pool?
Because i'm mining from the start and nothing comes in my wallet or can see any transactions at all...
May 02, 2014, 02:09:41 PM
Quote
{
"version" : 80701,
"protocolversion" : 70002,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 113,
"timeoffset" : -4,
"connections" : 8,
"proxy" : "",
"difficulty" : 2.00000000,
"testnet" : false,
"keypoololdest" : 1399054077,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}
is it working? "version" : 80701,
"protocolversion" : 70002,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 113,
"timeoffset" : -4,
"connections" : 8,
"proxy" : "",
"difficulty" : 2.00000000,
"testnet" : false,
"keypoololdest" : 1399054077,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}
Jump to: