Topic: ★[ANN] [NAV] NAV COIN - Community Fund Live!!! - page 343. (Read 2085654 times)

I talking in this topic abouth 3 weeks ago because I have always max 1 connection to nethwork.
Some pro user legendary told here its problem with routers dont like high number ports.
He wrote this port and on wallet 3.5 and I have few connect to nethwork !!! this help !!
So if I change back to 44440 I think will the same as before. I have windows 7 updated.
Ok I change but not hope it help witch synchrfo but OK. port its not original wallet port.
restart and waiting I inform you after its help some or not.
And my IP is changing its TV cable connection so no help add my IP I think, sorry.
I try again with oryginal port.

Please change you navcoin.conf to mine. That port is definitely not correct. 44440 is the correct. Bit i would just copy paste my file. It is working on my side!

Wrong port.

Maybe if you agreements in PM with Shahim, you could try with a reverse
connection.

I mean that could be Shahim which try to to add your ip to the list of its
nodes, and start an incoming connection (view from your side).

PS:
If I remember correctly, the RPC command to do this on a temporary basis should be:
addnode "ip" onetry

LOL!!
Shahim, if there is one thing of which you and I are both experienced,
well this is definitely the bootstrap of the Nav.

Indeed as you say, during the bootstrap you do not need to be online.

There are other factors that determine the time required to bootstrap,
for example, the hardware configuration... or the software.

My config on 3.6:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=9123
listen=1
daemon=1
server=1
maxorphanblocks=10000
addnode=171.232.14.103
addnode=185.61.148.209
addnode=198.74.56.141
addnode=2.87.176.9
addnode=213.108.119.84
addnode=219.88.236.146
addnode=31.16.109.143
addnode=49.145.118.57
addnode=5.230.142.254
addnode=5.230.146.212
addnode=60.53.22.139
addnode=95.183.50.54
addnode=95.183.50.58
addnode=95.183.51.15
addnode=95.183.52.165
addnode=95.183.53.184

PS. addnode from your link.

Thanks Bspus.
IMHO This is the correct\canonical way to load a blockchain,
in this way each block is read, fully controlled and therefore indexed,
just as if it was downloaded from the network, but without having
to be online.

Do not worry, take all the time you need.
As you may have noticed the progression is more than linear.
 
You're right when you say that to a higher frequency of stakes,
often it is also accompanied by a higher probability of producing
chains of orphans blocks, is something that we have experienced all
many months ago.
 
Perhaps, in the future the DevTeam could imagine a kind of
simple "pacemakers", which avoids the production of too many
consecutive blocks by a wallet (too heavy).

For example it may be sufficient to impose a pause of 40 seconds
of sleep to the miner, after it as produced a new block.

This is a simple thing that they can do with a couple of lines.
I think that would not result in losses to the miner, but on the
contrary it would give everyone a chance to produce blocks.

Moreover giving the possibility of alternating the blocks created
by different wallet, it could increase security and possibly lessen
the orphans.

What happens now is that a few hours ago, after the stall of the
blockchain the PosDif collapsed at very low levels, but fortunately
now is recovering, as you can see here, in the chart below:
https://chainz.cryptoid.info/nav/#!extraction

I imagine that when you've finished bootstrapping, POSDif will be returned
normal, but in the meantime it will not surprise me if there will be a few
more small number of orphans, and a bit of Yoyo effect in the staking times
and PosDif.

Mate,

Post your navcoin.conf please. There must be some problems with your network. It is very strange you are the one with these problems always. I run thenew wallet since 3 hours and have ten connections.

I use this conf file:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
maxorphanblocks = 10000
addnode=1.34.180.245
addnode=104.172.24.79
addnode=104.236.223.182
addnode=108.49.230.28
addnode=118.173.189.50
addnode=122.0.19.70
addnode=123.3.30.61
addnode=14.192.212.120
addnode=171.6.249.127
addnode=175.214.144.141
addnode=177.102.227.9
addnode=177.97.160.253
addnode=184.167.180.122
addnode=185.61.148.209
addnode=198.74.56.141
addnode=199.189.131.28
addnode=199.189.131.7
addnode=2.121.16.51
addnode=2.83.95.17
addnode=2.87.179.215
addnode=201.13.110.28
addnode=201.22.82.236
addnode=208.95.215.81
addnode=210.186.127.239
addnode=210.186.96.154
addnode=210.186.98.134
addnode=213.108.119.84
addnode=45.50.28.121
addnode=49.147.108.204
addnode=49.147.97.46
addnode=49.147.97.74
addnode=5.101.213.137
addnode=5.230.146.212
addnode=60.53.28.46
addnode=67.170.67.247
addnode=67.71.48.138
addnode=71.53.154.187
addnode=73.254.153.254
addnode=78.88.29.28
addnode=78.88.29.3
addnode=79.42.236.146
addnode=81.157.241.69
addnode=84.52.229.225
addnode=84.84.197.176
addnode=90.208.175.48
addnode=91.153.109.149
addnode=95.183.50.54
addnode=95.183.51.15
addnode=95.183.52.165
addnode=95.183.53.12
addnode=95.183.53.184

what is yours?

Edit: perhaps try to make some tracert to different addresses. Where are you living?  Turkey or Russia?

0 active connection with new wallet !!!
I have config with new nodes.
I downloaded bootstrap too.
not working !!!!
Wallet show me 10 weeks ago synchro and 0 connection to nethwork !!!
My address is correct ofc I check it. but not even start synch !!!

Yes everybody get the wallet up and start staking!

For me, the new wallet works great. No problems.
Currently, 13 connections.

How can I tell? Its still there and there is activity in the other subfolders but I don't know what to look for.

If it makes a difference, the wallet started instantly. There did not seem to be anytime to "adjust" to anything, like when you drop a complete blockchain in it.

Yet right now it says "importing blocks" on the status bar at the left hand side. So I suppose its using the bootstrap?

1h 40m and its at 74500

With the bootstrap file? Hm it is the complete blockchain in it. I don't understand why it needs to download. When you look into Appdata. Is the bootstrap extracted?

Remy? Soopy?

After 40 minutes right now I'm at block 45270. It's sure taking its time.
Downloading the blockchain and syncing the old way took less time.

Looks like I'll have to leave it unattended before it finishes because it will take another 2 hours if it goes like this. I hope it doesn't make a mess again with fake stakes

Yes but 10 a minute for a coin with 30 sec blocks?

Maybe he has the same problem I have, where I keep staking blocks on top of other staked blocks, so they all appear legit in my wallet but in reality they are orphans

Oooh thanks Soopster!  I like that

There's not many clients on the 3.6.0 and the network is yet to propagate to it , so less weight. More stake for the one's staking.

Warm Regards,
~SoopY~

downloaded 3.6 wallet and now its staking like a motherfunkster - like 10 a minute!

Any ideas?

Would you be so kind as to take note of how long it takes to complete the bootstrap?
It does not need a precise measure up to the second, even a crude measure would be helpful.

The time can also vary according to the hardware in use, so it would be useful to have data from different users to aggregate.

that should be correct!